A nanometre is one billionth of a metre, about the width of ten hydrogen atoms in a row. When a material is made this small in at least one direction, its colour, strength, melting point, conductivity and chemical reactivity can change dramatically: gold nanoparticles look red, and a sheet of carbon one atom thick is stronger than steel. This module defines nanomaterials, classifies nanostructured materials by their dimensions, and lists their applications. It then studies the two most important carbon nanomaterials: graphene, and carbon nanotubes of the single-walled (SWCNT) and multi-walled (MWCNT) types with their properties and uses. It maps to course outcome CO6.
Summary
Nanomaterials: Nanomaterials are materials that have at least one external dimension, or an internal structure, in the nanoscale range of about 1 to 100 nm, and that show properties different from the same material in bulk form. Nanotechnology is the design, production and use of structures and devices by controlling matter at this scale. Two effects cause the change in properties: (i) a very large surface-area-to-volume ratio, so a large fraction of atoms sit at the surface, which raises chemical reactivity and catalytic activity and lowers the melting point; and (ii) quantum confinement, where electrons are squeezed into a space comparable to their wavelength, so energy levels become discrete and optical and electrical properties depend on size (for example quantum dots of CdSe emit different colours depending on their diameter).
Types of nanostructured materials: By the number of dimensions that are not in the nanoscale, nanomaterials are classified as (i) zero-dimensional (0D), with all three dimensions in the nanoscale: nanoparticles, nanoclusters, quantum dots, fullerenes (C60); (ii) one-dimensional (1D), with one dimension larger than 100 nm: nanotubes, nanowires, nanorods, nanofibres; (iii) two-dimensional (2D), with two dimensions larger than 100 nm: nanofilms, nanosheets, nanocoatings, graphene; and (iv) three-dimensional (3D), bulk materials built from nanoscale units: nanocrystalline metals and ceramics, nanocomposites, nanoporous materials, bundles of nanotubes. By composition they are carbon-based (fullerenes, CNTs, graphene, nanodiamonds), metal and metal oxide based (Au, Ag, TiO2, ZnO, Fe3O4), semiconductor quantum dots, dendrimers (tree-like branched polymers) and nanocomposites.
Applications of nanomaterials: Medicine: targeted drug delivery, imaging contrast agents, cancer therapy with gold or magnetic nanoparticles, antibacterial silver nanoparticles in dressings. Electronics: smaller and faster transistors, memory devices, quantum dot (QLED) displays, conductive inks. Energy: better electrodes for lithium-ion batteries and supercapacitors, catalysts in fuel cells, efficient solar cells. Environment: water purification membranes and filters, catalytic converters, TiO2 photocatalysts that destroy pollutants. Consumer products: ZnO and TiO2 nanoparticles in transparent sunscreens, stain-resistant and antibacterial fabrics, scratch-resistant coatings, self-cleaning glass, lighter and stronger sports goods. Construction and automobiles: stronger concrete, lighter body parts, nano-additives in tyres and paints.
Graphene: Graphene is a single layer of carbon atoms, each sp2 hybridised and bonded to three others, arranged in a flat two-dimensional hexagonal (honeycomb) lattice. It is the basic building block of graphite (stacked graphene layers 0.335 nm apart), carbon nanotubes (rolled graphene) and fullerenes (graphene-like sheets curved into a ball). The C-C bond length is 0.142 nm. It was first isolated in 2004 by Andre Geim and Konstantin Novoselov by repeatedly peeling graphite with adhesive tape (mechanical exfoliation), for which they received the Nobel Prize in Physics in 2010. Other methods are chemical vapour deposition (CVD) of methane on copper foil at about 1000 °C, chemical oxidation of graphite to graphene oxide followed by reduction, liquid-phase exfoliation, and epitaxial growth on silicon carbide.
Properties and uses of graphene: It is the thinnest material (one atom thick) and one of the strongest ever measured (Young's modulus about 1 TPa, intrinsic tensile strength about 130 GPa), yet light and flexible. It is a zero band gap semiconductor (semimetal) with extremely high electron mobility, very high thermal conductivity (several thousand W/m K), transparency (one layer absorbs only about 2.3 percent of visible light), impermeability to gases, and a very large theoretical surface area (about 2630 m²/g). Uses: transparent conducting electrodes for touch screens and flexible displays, high-frequency transistors and flexible electronics, sensors, electrodes for batteries and supercapacitors, strong light composites, conductive inks, anti-corrosion and barrier coatings, membranes for water purification and desalination, and heat spreaders in electronics.
Carbon nanotubes (CNTs): A carbon nanotube is a seamless hollow cylinder formed by rolling up one or more graphene sheets, usually closed at the ends by fullerene-like caps. Multi-walled tubes were reported by Sumio Iijima in 1991 and single-walled tubes in 1993. They have diameters of about 1 nm to tens of nanometres and lengths of micrometres to centimetres, so their length-to-diameter ratio (aspect ratio) is very large. They are made by arc discharge between graphite electrodes, laser ablation of graphite, and catalytic chemical vapour deposition (hydrocarbon gas over Fe, Co or Ni catalyst particles at about 600 to 1000 °C), the last being the main commercial route.
Single-walled and multi-walled CNTs: A single-walled carbon nanotube (SWCNT) is one rolled graphene sheet, with a diameter of about 0.4 to 2 nm (commonly about 1 nm). The way the sheet is rolled, described by the chiral vector (n, m), decides whether it is armchair (n = m), zigzag (m = 0) or chiral, and whether it is metallic or semiconducting: if (n - m) is a multiple of 3 the tube is metallic, otherwise semiconducting (strictly, only armchair tubes are truly metallic; other tubes with (n - m) a multiple of 3 have a very small curvature-induced gap and are called quasi-metallic). SWCNTs are more flexible, have fewer defects and are better for electronics, but are harder to make and costlier. A multi-walled carbon nanotube (MWCNT) consists of several concentric graphene cylinders, one inside another like a Russian doll, with an interlayer spacing of about 0.34 nm and outer diameters of about 2 to 100 nm. MWCNTs are easier and cheaper to make in bulk, behave mostly as metallic conductors, are stiffer and more robust chemically, but have more defects.
Properties and uses of CNTs: Very high tensile strength (tens of GPa, highest of all known fibres) and Young's modulus (about 1 TPa) with low density (about 1.3 to 2 g/cm³), excellent electrical conductivity and current-carrying capacity (about 1000 times that of copper), very high thermal conductivity along the axis, high aspect ratio and surface area, chemical stability and flexibility. Uses: reinforcing fibres in light, strong composites for aircraft, cars, bicycles, tennis racquets and wind turbine blades; conductive additives in lithium-ion battery electrodes; supercapacitors; nano-transistors and interconnects; field emission sources and displays; chemical and biological sensors; drug delivery carriers; transparent conductive films; EMI shielding; water filters; AFM probe tips.
Mind map
Nano materials
- Basics
- 1 to 100 nm in at least one dimension
- High surface-to-volume ratio
- Quantum confinement
- Types
- 0D: nanoparticles, quantum dots, C60
- 1D: nanotubes, nanowires, nanorods
- 2D: graphene, thin films, nanosheets
- 3D: nanocrystalline solids, nanocomposites
- Applications
- Medicine, electronics, energy
- Environment, cosmetics, textiles
- Graphene
- One-atom-thick sp2 honeycomb
- Strongest, conductive, transparent
- Exfoliation, CVD, GO reduction
- Touch screens, batteries, membranes
- Carbon nanotubes
- SWCNT: one wall, 0.4 to 2 nm, metallic or semiconducting
- MWCNT: many walls, 0.34 nm spacing
- Arc, laser, CVD
- Composites, batteries, sensors, electronics
Why the nanoscale changes properties
- Take a 1 cm cube of a material: surface area 6 cm², and only a tiny fraction of its atoms lie at the surface.
- Cut it into 1 nm cubes: you get \(10^{21}\) cubes with a total surface area of \(6\times10^{3}\) m², ten million times larger.
- Surface atoms have unsatisfied bonds and higher energy, so reactivity, catalytic activity and adsorption rise sharply and the melting point falls.
- At the same time, electrons are confined in a box only a few nanometres wide, so their energy levels become discrete and spread apart.
- The band gap therefore increases as size decreases: smaller CdSe quantum dots emit bluer light, larger ones redder light.
- Gold nanoparticles absorb green light through surface plasmon resonance and look red or purple, not yellow.
- These size-dependent properties are exploited in catalysts, sensors, displays, medicine and electronics.
Classification of nanomaterials
| Class | Dimensions in nanoscale | Examples | Typical uses |
|---|---|---|---|
| 0D | All three | Nanoparticles (Au, Ag), quantum dots, fullerenes, nanoclusters | Drug delivery, catalysis, QLED displays, antibacterial coatings |
| 1D | Two (one dimension long) | Carbon nanotubes, nanowires, nanorods, nanofibres | Nanoelectronics, composites, sensors, battery electrodes |
| 2D | One (thickness only) | Graphene, nanosheets, thin films, nanocoatings | Touch screens, membranes, protective coatings |
| 3D | None as a whole, but built of nanoscale units | Nanocrystalline metals, nanocomposites, nanoporous solids, CNT bundles | High-strength structural parts, filters, catalysts |
SWCNT versus MWCNT
| Feature | SWCNT | MWCNT |
|---|---|---|
| Structure | Single rolled graphene sheet | Several concentric graphene cylinders (interlayer spacing about 0.34 nm) |
| Diameter | About 0.4 to 2 nm | About 2 to 100 nm |
| Electrical nature | Metallic or semiconducting depending on chirality | Mostly metallic (conducting) |
| Synthesis | Needs a catalyst; harder to control, lower yield | Can be made even without catalyst; easier bulk production |
| Purity and defects | Fewer defects but purification is difficult | More structural defects |
| Flexibility | Very flexible, can be twisted | Stiffer |
| Cost | Expensive | Cheaper |
| Uses | Nanoelectronics, transistors, sensors, transparent films, drug delivery | Composites, battery and supercapacitor electrodes, conductive plastics, EMI shielding, field emitters |
Important definitions
| Term | Meaning |
|---|---|
| Nanometre | \(10^{-9}\) m. |
| Nanomaterial | A material with at least one dimension in the range 1 to 100 nm and size-dependent properties. |
| Nanotechnology | Design, production and application of structures and devices by controlling matter at the nanoscale. |
| Quantum confinement | Change of electronic and optical properties when particle size becomes comparable to the electron wavelength. |
| Quantum dot | A semiconductor nanocrystal (0D) whose emitted colour depends on its size. |
| Fullerene | A closed cage molecule of carbon, for example C60 (buckminsterfullerene) with 12 pentagons and 20 hexagons. |
| Graphene | A single atomic layer of sp2 carbon atoms in a hexagonal honeycomb lattice. |
| Carbon nanotube | A hollow cylinder formed by rolling one or more graphene sheets. |
| SWCNT and MWCNT | Single-walled (one cylinder) and multi-walled (several concentric cylinders) carbon nanotubes. |
| Chirality of a CNT | The direction in which the graphene sheet is rolled, given by (n, m): armchair, zigzag or chiral. |
| Aspect ratio | Ratio of length to diameter. |
Formulas
| Formula | Meaning |
|---|---|
| \( \dfrac{S}{V} = \dfrac{3}{r} \) | Surface-to-volume ratio of a sphere of radius r; it rises as size falls. |
| \( \dfrac{S}{V} = \dfrac{6}{a} \) | Surface-to-volume ratio of a cube of edge a. |
| \( d = \dfrac{a\sqrt{n^2 + nm + m^2}}{\pi},\ a = 0.246 \text{ nm} \) | Diameter of an (n, m) SWCNT. |
| \( (n - m) = 3q \Rightarrow \) metallic | Rule for metallic SWCNTs (q an integer); otherwise semiconducting. |
Key points to remember
- Nanoscale: 1 to 100 nm in at least one dimension.
- Two causes of new properties: high surface-to-volume ratio and quantum confinement.
- 0D quantum dots and fullerenes; 1D nanotubes and nanowires; 2D graphene and films; 3D nanocrystalline solids.
- Graphene: one-atom-thick sp2 carbon, C-C 0.142 nm, isolated 2004, Nobel Prize 2010 (Geim and Novoselov).
- Graphene: about 1 TPa modulus, zero band gap, very high mobility and thermal conductivity, about 97.7% transparent.
- CNT = rolled graphene; Iijima 1991.
- SWCNT: one wall, about 1 nm, metallic or semiconducting. MWCNT: many walls 0.34 nm apart, mostly metallic, cheaper.
- Armchair tubes are always metallic.
- CNT synthesis: arc discharge, laser ablation, CVD (main commercial method).
Solved examples
Example 1. A 1 cm cube is divided into cubes of edge 1 nm. Find the total surface area and compare it with the original.
Number of cubes = \((10^{-2}/10^{-9})^3 = (10^{7})^3 = 10^{21}\). Area of each = \(6\times(10^{-9})^2 = 6\times10^{-18}\) m². Total = \(6\times10^{3}\) m². Original area = \(6\times10^{-4}\) m². Increase = \(10^{7}\) times: ten million times more surface for the same mass.
Example 2. Compare the surface-to-volume ratio of a sphere of diameter 10 nm with one of diameter 1 cm.
r = 5 nm: S/V = 3/(5 x 10-9) = 6 x 108 m-1. r = 0.5 cm: S/V = 3/(5 x 10-3) = 600 m-1. The nanoparticle has a ratio \(10^{6}\) times larger.
Example 3. Find the diameter of a (10, 10) SWCNT and state whether it is metallic.
\( d = 0.246\sqrt{100 + 100 + 100}/\pi = 0.246\times17.32/3.1416 = 1.36 \) nm. n - m = 0, a multiple of 3, so it is metallic (armchair tube).
Example 4. Find the diameter of a (10, 0) SWCNT and its electrical nature.
\( d = 0.246\times10/\pi = 0.78 \) nm. n - m = 10, not a multiple of 3, so it is semiconducting (zigzag tube).
Important questions and answers
Q1. Define nanomaterials. Classify nanostructured materials with examples. (5 marks)
Nanomaterials are materials with at least one dimension in the 1 to 100 nm range and showing size-dependent properties different from bulk. Classification by dimensionality: 0D, all dimensions nanoscale: nanoparticles, quantum dots, fullerenes. 1D, one dimension large: nanotubes, nanowires, nanorods. 2D, two dimensions large: graphene, nanofilms, nanocoatings. 3D, bulk made of nanoscale units: nanocrystalline metals, nanocomposites, nanoporous materials. By composition: carbon-based, metal and metal oxide, quantum dots, dendrimers, nanocomposites.
Q2. Give applications of nanomaterials in various fields. (5 marks)
Medicine: targeted drug delivery, imaging, cancer therapy, antibacterial silver dressings. Electronics: nano-transistors, memory, QLED displays. Energy: battery and supercapacitor electrodes, fuel cell catalysts, solar cells. Environment: water purification, photocatalytic degradation of pollutants by TiO2, catalytic converters. Consumer goods: ZnO and TiO2 sunscreens, stain-resistant fabrics, self-cleaning glass, sports equipment. Construction and transport: stronger concrete, light composites, scratch-resistant paints.
Q3. What is graphene? Give its structure, properties and applications. (5 marks)
Graphene is a one-atom-thick sheet of sp2 carbon atoms in a hexagonal honeycomb lattice (C-C 0.142 nm); stacked layers make graphite. Prepared by mechanical exfoliation, CVD on copper, reduction of graphene oxide. Properties: thinnest and one of the strongest materials (modulus about 1 TPa), light and flexible, zero band gap semimetal with very high electron mobility, very high thermal conductivity, about 97.7 percent transparent, impermeable to gases, huge surface area (about 2630 m²/g). Applications: transparent electrodes for touch screens, flexible electronics, fast transistors, sensors, batteries and supercapacitors, composites, barrier and anti-corrosion coatings, desalination membranes.
Q4. What are carbon nanotubes? Distinguish between SWCNTs and MWCNTs. (5 marks)
Carbon nanotubes are hollow cylinders of rolled graphene sheets, closed by fullerene-like caps, with nanometre diameters and very large aspect ratio. SWCNT: one graphene cylinder, diameter about 0.4 to 2 nm, metallic or semiconducting depending on chirality, very flexible, fewer defects, difficult and expensive to make; used in nanoelectronics, sensors and transparent films. MWCNT: several concentric cylinders about 0.34 nm apart, diameter about 2 to 100 nm, mostly metallic, stiffer, more defects, easier and cheaper bulk production; used in composites, battery electrodes, conductive plastics and EMI shielding.
Q5. State properties and uses of carbon nanotubes. (4 marks)
Properties: very high tensile strength and stiffness (modulus about 1 TPa) with low density; high electrical conductivity and current capacity; high thermal conductivity along the axis; high aspect ratio and surface area; chemical stability; flexibility. Uses: composites for aerospace, automobiles and sports goods; lithium-ion battery additives and supercapacitors; nano-transistors and interconnects; field emission displays; sensors; drug delivery; transparent conductive films; water filters.
Q6. Why do nanomaterials show properties different from bulk materials? (3 marks)
(i) Surface-to-volume ratio: as size decreases, a large fraction of atoms are at the surface with unsatisfied bonds, so reactivity, catalytic activity and solubility increase and melting point decreases. (ii) Quantum confinement: electrons are confined in a very small region, energy levels become discrete and the band gap increases, changing colour, optical absorption and conductivity. Example: gold nanoparticles look red; CdSe quantum dots emit different colours with size.
Exam tips
- Always quote the 1 to 100 nm range in the definition.
- For classification, give a sketch: dot (0D), tube (1D), sheet (2D), block of grains (3D).
- Draw graphene as a honeycomb and a CNT as a rolled honeycomb; for MWCNT show concentric circles in cross-section.
- Use a table of at least six points for SWCNT versus MWCNT.
- Remember the names and years: Iijima 1991 (CNT); Geim and Novoselov 2004, Nobel 2010 (graphene).
FAQs
Is graphene a metal or a semiconductor?
Neither exactly. It is a zero band gap semiconductor, also called a semimetal: its valence and conduction bands just touch. A band gap can be opened by cutting it into narrow ribbons or by chemical modification.
Why are some CNTs metallic and others semiconducting?
Rolling the graphene sheet in different directions changes which electron states are allowed around the tube's circumference. Only tubes with (n - m) a multiple of 3 include the states that make them metallic.
Are nanomaterials safe?
Their small size lets some particles enter cells or the lungs, so certain nanomaterials can be toxic. Safety testing and careful handling are part of nanotechnology.
Is a fullerene 0D or 1D?
A fullerene such as C60 is about 0.7 nm across in every direction, so it is a 0D nanomaterial.
These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Engineering Materials) and were prepared with AI help and checked.