Back to the page

In the print window, choose “Save as PDF”.

doubtly doubtly.in

Biomass and Fuel Cell Notes FE Sem 2 Environmental Chemistry | MU

Environmental Chemistry and Non-conventional energy sources · Updated 27 Oct 2026 · Read online: www.doubtly.in/mu-fe-environmental-chemistry-biomass-energy-fuel-cell-notes/

Every winter, farmers in north India burn crop stubble that could instead fuel power plants, biogas digesters and ethanol refineries, and a growing number of buses and trucks are being tested on hydrogen fuel cells that emit only water. This module of Environmental Chemistry and Non-conventional Energy Sources (BSC2032, FE Semester 2) covers two such sources in depth. Part A is biomass energy: definition, sources (wood, agricultural crops, animal waste, algae and sewage), advantages and disadvantages, the three important conversion processes (pyrolysis, gasification and anaerobic decomposition) and the direct and indirect uses of biomass. Part B is the hydrogen fuel cell. It maps to CO5. Learn the reactions in each process and the fuel cell electrode reactions; they are asked almost every time.

Summary

Definition of biomass: Biomass is all organic matter derived from living or recently living plants and animals, including wood, crops and crop residues, animal dung, food and garden waste, sewage sludge and algae. It is stored solar energy: green plants fix CO2 and water into carbohydrates by photosynthesis, \(6CO_2 + 6H_2O \xrightarrow{\text{sunlight, chlorophyll}} C_6H_{12}O_6 + 6O_2\), and this chemical energy is released when the biomass is burnt or converted into fuels. Biomass energy (bioenergy) is renewable because plants can be regrown, and is nearly carbon neutral when growth matches use. Typical dry biomass has a calorific value of about 15 to 20 MJ/kg, roughly half that of good coal or less than half that of oil.

Sources of biomass: (1) Wood and forest residues: firewood, logging and sawmill wastes, sawdust, bark, and energy plantations of fast growing trees (eucalyptus, subabul, casuarina). (2) Agricultural crops and residues: crop residues such as rice and wheat straw, husk, cotton stalks, coconut shells and bagasse (from sugar cane); energy crops such as sugar cane and maize (for ethanol) and non-edible oil seeds such as jatropha and pongamia (karanja) for biodiesel. (3) Animal waste: cattle dung, poultry litter and pig manure, mainly used for biogas; India has one of the largest cattle populations in the world, making dung a major rural resource. (4) Algae: microalgae and seaweeds grow very fast, do not need farmland, can grow on wastewater and contain oils (in some species a large fraction of dry weight), carbohydrates and proteins; they can be converted into biodiesel, biogas or bio-crude, though large-scale use is still costly. (5) Sewage and municipal waste: sewage sludge and the organic fraction of municipal solid waste can be digested to biogas or burnt in waste-to-energy plants; industrial organic wastes from distilleries, dairies and food processing also give biogas.

Advantages of biomass: renewable and widely available, especially in rural areas; carbon neutral if sustainably managed; reduces dependence on imported oil; converts wastes (residues, dung, sewage) into useful energy and reduces pollution and stubble burning; can be stored and used when needed (unlike sun and wind), so it can supply dispatchable power; provides rural employment and income; low sulphur content compared with coal; by-products such as digested slurry and biochar are good fertilisers and soil conditioners.

Disadvantages of biomass: low energy density and high moisture, so it is bulky and costly to collect, transport and store; supply is seasonal and scattered; competition with food, fodder and land and water for food crops (food versus fuel debate); direct burning in traditional stoves is inefficient (about 10 to 15 percent) and causes indoor air pollution and health problems; over-harvesting causes deforestation and soil erosion; conversion plants need significant investment and skilled operation; ash and tar handling problems.

Pyrolysis: Pyrolysis is the thermal decomposition of biomass by heating in the absence of oxygen (or with very little), typically at about 300 to 700 °C. The large organic molecules (cellulose, hemicellulose and lignin) break down into three products: a solid (charcoal or biochar), a liquid (bio-oil or pyrolysis oil, along with tar and an aqueous fraction containing acetic acid, methanol and acetone) and gases (CO, CO2, H2, CH4 and light hydrocarbons). Slow pyrolysis (low temperature about 300 to 500 °C, long residence time of hours) maximises charcoal; this is the traditional charcoal making process. Fast pyrolysis (about 450 to 600 °C, very rapid heating, vapour residence time of about 1 to 2 seconds, rapid quenching) maximises bio-oil, giving up to about 60 to 75 percent liquid. Higher temperatures and longer times favour gas. Bio-oil can be burnt in boilers or upgraded to transport fuels; charcoal is a clean-burning fuel and, as biochar, a soil improver that stores carbon; the gas is used to heat the reactor itself.

Gasification: Gasification converts solid biomass into a combustible gas mixture (producer gas) by partial oxidation at high temperature (about 700 to 1100 °C) with a limited supply of air, oxygen or steam (less than needed for complete combustion). In a downdraft gasifier biomass passes through four zones: (1) drying zone (about 100 to 200 °C), where moisture evaporates; (2) pyrolysis zone (about 200 to 600 °C), where volatiles, tar and char form; (3) oxidation (combustion) zone (about 900 to 1200 °C), where air is admitted and part of the char and volatiles burn, supplying heat: \(C + O_2 \rightarrow CO_2\), \(2H_2 + O_2 \rightarrow 2H_2O\); (4) reduction zone (about 700 to 900 °C), where hot char reduces CO2 and steam (endothermic): \(C + CO_2 \rightarrow 2CO\) (Boudouard reaction), \(C + H_2O \rightarrow CO + H_2\) (water gas reaction), along with \(CO + H_2O \rightleftharpoons CO_2 + H_2\) (water gas shift) and \(C + 2H_2 \rightarrow CH_4\) (methanation). Air-blown producer gas typically contains about 18 to 22 percent CO, 15 to 20 percent H2, 1 to 3 percent CH4, 8 to 12 percent CO2 and about 50 percent N2, with a calorific value of about 4.5 to 6 MJ/m³. With oxygen or steam the gas (syngas) is richer and can be used to make methanol, synthetic diesel (Fischer-Tropsch) or hydrogen. Producer gas is used in boilers, furnaces, dryers and in engines for power in rural areas and industries; the gas must be cleaned of tar and dust before use in engines.

Anaerobic decomposition (anaerobic digestion): Wet biomass such as cattle dung, food waste and sewage sludge is decomposed by bacteria in the absence of oxygen to produce biogas, a mixture of about 50 to 70 percent methane and 30 to 45 percent carbon dioxide with traces of H2S, N2, H2 and water vapour, with a calorific value of about 20 to 24 MJ/m³. The process takes place in four stages: (1) hydrolysis: complex organic matter (carbohydrates, proteins, fats) is broken by enzymes into simple sugars, amino acids and fatty acids; (2) acidogenesis: acid-forming bacteria convert these into volatile fatty acids, alcohols, H2 and CO2; (3) acetogenesis: these are converted into acetic acid, H2 and CO2; (4) methanogenesis: methanogenic archaea convert acetic acid and H2 plus CO2 into methane: \(CH_3COOH \rightarrow CH_4 + CO_2\), \(CO_2 + 4H_2 \rightarrow CH_4 + 2H_2O\). The overall reaction for glucose is \(C_6H_{12}O_6 \rightarrow 3CH_4 + 3CO_2\). Favourable conditions: temperature about 30 to 40 °C (mesophilic, best near 35 °C), pH about 6.8 to 7.5, C/N ratio about 20 to 30, solids content of the slurry about 8 to 10 percent (dung mixed with an equal amount of water), retention time about 30 to 50 days, absence of oxygen and of toxic substances. Biogas plants in India are of two main types: the floating drum (KVIC) type, in which a steel gas holder floats on the slurry and rises as gas collects (constant pressure), and the fixed dome (Janata, Deenbandhu) type, a cheaper masonry dome in which gas pressure displaces slurry into an outlet chamber (variable pressure). The digested slurry is an excellent manure, richer in available nitrogen than raw dung, and digestion also kills many pathogens, improving sanitation. Large digesters treat sewage sludge, distillery spent wash and municipal organic waste; purified biogas (methane above about 90 percent) is compressed as bio-CNG, promoted in India under the SATAT scheme.

Uses of biomass, direct (heat generation): Direct combustion of wood, residues, dung cakes and bagasse supplies heat for cooking (improved cookstoves raise efficiency from about 10 percent to 25 to 35 percent and cut smoke), for industrial boilers and furnaces (rice mills, brick kilns, tea and spice drying), and for generating steam for electricity. Sugar mills burn bagasse in high pressure boilers for cogeneration, producing both process steam and surplus electricity sold to the grid. Biomass pellets and briquettes (compressed residues) are co-fired with coal in thermal power plants, which India has made mandatory at a few percent blending to reduce stubble burning.

Uses of biomass, indirect (conversion to biofuels): (1) Biogas from anaerobic digestion for cooking, lighting, engines and as bio-CNG for vehicles. (2) Bioethanol by fermentation of sugars from sugar cane juice or molasses, or starch from grains after hydrolysis, using yeast: \(C_6H_{12}O_6 \xrightarrow{\text{yeast}} 2C_2H_5OH + 2CO_2\); second generation (2G) ethanol from crop residues such as straw requires breaking down cellulose first (a 2G plant operates at Panipat). Ethanol is blended with petrol; India reached about 20 percent blending (E20) in 2025. (3) Biodiesel by transesterification of vegetable oils or animal fats with methanol in presence of an alkali catalyst (NaOH or KOH): triglyceride + 3 CH3OH → 3 fatty acid methyl esters (biodiesel) + glycerol; non-edible oils (jatropha, karanja) and used cooking oil are preferred. (4) Producer gas and syngas from gasification. (5) Bio-oil and charcoal from pyrolysis. (6) Biohydrogen from fermentation and from gasification. These liquid and gaseous fuels are easier to transport and use than raw biomass.

Hydrogen fuel cell: A fuel cell is an electrochemical device that converts the chemical energy of a fuel (hydrogen) and an oxidant (oxygen from air) directly into electricity, with heat and water as by-products, as long as the reactants are supplied. Unlike a battery it does not store the reactants and does not need recharging, and unlike a heat engine it is not limited by the Carnot efficiency. Construction (H2-O2 fuel cell): two porous electrodes (carbon with finely divided platinum catalyst, or nickel in alkaline cells) separated by an electrolyte. Hydrogen is fed to the anode and oxygen or air to the cathode. In the alkaline fuel cell (electrolyte KOH, used in the Apollo and Space Shuttle missions): anode \(2H_2 + 4OH^- \rightarrow 4H_2O + 4e^-\); cathode \(O_2 + 2H_2O + 4e^- \rightarrow 4OH^-\). In the proton exchange membrane (PEM) fuel cell (solid polymer electrolyte such as Nafion that conducts H⁺, used in vehicles): anode \(2H_2 \rightarrow 4H^+ + 4e^-\); cathode \(O_2 + 4H^+ + 4e^- \rightarrow 2H_2O\). In both, the overall reaction is \(2H_2 + O_2 \rightarrow 2H_2O\). Electrons travel from anode to cathode through the external circuit (giving current), while ions move through the electrolyte to complete the circuit. Standard cell potential \(E^\circ = 1.23\) V at 25 °C; a single cell gives about 0.6 to 0.8 V under load, so cells are stacked in series. Theoretical maximum efficiency is \(\Delta G/\Delta H = 237.1/285.8 \approx 83\) percent; practical electrical efficiencies are about 40 to 60 percent, and higher when waste heat is also used. Other types: phosphoric acid (PAFC), molten carbonate (MCFC) and solid oxide (SOFC) fuel cells, which operate at higher temperatures. Advantages: high efficiency, only water as product (zero emissions at the point of use), silent, few moving parts, modular. Limitations: high cost of platinum catalyst and membranes; production of hydrogen (today mostly from natural gas by steam reforming, which emits CO2; green hydrogen by water electrolysis using renewable power is clean but costly); difficulty of storing and transporting hydrogen (low density, needs high pressure or cryogenic storage, leakage and safety); catalyst poisoning by CO. Applications: spacecraft, fuel cell electric vehicles and buses, backup power for telecom towers and hospitals, combined heat and power. India's National Green Hydrogen Mission (launched 2023) aims at about 5 million tonnes of green hydrogen production per year by 2030.

Mind map

Non-conventional Energy Sources: Biomass and Fuel Cell

  • Biomass
    • Stored solar energy via photosynthesis
    • Sources: wood, crops, animal waste, algae, sewage
    • Pros: renewable, storable, uses waste
    • Cons: bulky, seasonal, food vs fuel
  • Pyrolysis
    • Heat without O2, 300 to 700 °C
    • Char, bio-oil, gas
    • Slow vs fast
  • Gasification
    • Partial oxidation
    • Drying, pyrolysis, oxidation, reduction zones
    • Producer gas: CO, H2, CH4, N2
  • Anaerobic digestion
    • Hydrolysis, acidogenesis, acetogenesis, methanogenesis
    • Biogas 50 to 70% CH4
    • KVIC and Deenbandhu plants
  • Uses
    • Direct: cooking, boilers, cogeneration
    • Indirect: biogas, ethanol, biodiesel, syngas
  • Hydrogen fuel cell
    • Anode H2 oxidised, cathode O2 reduced
    • E° = 1.23 V, max efficiency 83%
    • Costly catalyst, H2 storage

Biogas production step by step

  1. Mix fresh cattle dung with an equal amount of water to make a slurry of about 8 to 10 percent solids and feed it daily into the inlet tank.
  2. In the airtight digester, hydrolytic bacteria break carbohydrates, proteins and fats into sugars, amino acids and fatty acids.
  3. Acidogenic bacteria convert these into volatile fatty acids, alcohols, H2 and CO2.
  4. Acetogenic bacteria convert the acids and alcohols into acetic acid, H2 and CO2.
  5. Methanogens produce methane: \(CH_3COOH \rightarrow CH_4 + CO_2\) and \(CO_2 + 4H_2 \rightarrow CH_4 + 2H_2O\).
  6. Gas collects in the floating drum or fixed dome and is piped to the burner or engine; H2S may be removed with iron oxide.
  7. Digested slurry overflows from the outlet and is used as manure after drying.

Comparison of biomass conversion processes

PointPyrolysisGasificationAnaerobic digestion
TypeThermochemicalThermochemicalBiochemical
OxygenAbsentLimited (partial oxidation)Absent
TemperatureAbout 300 to 700 °CAbout 700 to 1100 °CAbout 30 to 40 °C (mesophilic)
FeedDry biomassDry biomassWet biomass (dung, food waste, sludge)
Main productChar, bio-oil, gasProducer gas (CO, H2)Biogas (CH4, CO2)
By-productTar, aqueous liquorAsh, tarDigested slurry (manure)

Important definitions

TermMeaning
BiomassOrganic matter from living or recently living plants and animals, used as a source of energy.
PyrolysisThermal decomposition of biomass in the absence of oxygen giving char, bio-oil and gas.
GasificationPartial oxidation of biomass at high temperature to produce a combustible gas.
Producer gasGas mixture of CO, H2, CH4, CO2 and N2 obtained by air gasification.
Anaerobic digestionBacterial decomposition of organic matter in the absence of oxygen producing biogas.
BiogasGas containing about 50 to 70 percent methane and 30 to 45 percent CO2.
BioethanolEthanol made by fermentation of sugars or starch from biomass.
BiodieselFatty acid methyl esters made by transesterification of vegetable oils or fats.
CogenerationSimultaneous production of electricity and useful heat from the same fuel.
Fuel cellElectrochemical cell converting the chemical energy of a continuously supplied fuel and oxidant directly into electricity.
Green hydrogenHydrogen produced by electrolysis of water using renewable electricity.

Formulas and key reactions

FormulaMeaning
\( 6CO_2 + 6H_2O \rightarrow C_6H_{12}O_6 + 6O_2 \)Photosynthesis, storing solar energy in biomass.
\( C + CO_2 \rightarrow 2CO;\ C + H_2O \rightarrow CO + H_2 \)Reduction zone reactions in a gasifier.
\( C_6H_{12}O_6 \rightarrow 3CH_4 + 3CO_2 \)Overall anaerobic digestion of glucose.
\( C_6H_{12}O_6 \rightarrow 2C_2H_5OH + 2CO_2 \)Alcoholic fermentation.
\( H_2 \rightarrow 2H^+ + 2e^-;\ \tfrac{1}{2}O_2 + 2H^+ + 2e^- \rightarrow H_2O \)PEM fuel cell anode and cathode.
\( H_2 + 2OH^- \rightarrow 2H_2O + 2e^-;\ \tfrac{1}{2}O_2 + H_2O + 2e^- \rightarrow 2OH^- \)Alkaline fuel cell anode and cathode.
\( \Delta G^\circ = -nFE^\circ \)Relation between free energy and cell emf (n = 2 per H2).
\( \eta_{max} = \dfrac{\Delta G}{\Delta H} \)Maximum thermodynamic efficiency of a fuel cell.

Key points to remember

Solved examples

Example 1. Calculate the standard emf and maximum efficiency of an H2-O2 fuel cell. ΔG° = −237.1 kJ/mol and ΔH° = −285.8 kJ/mol (liquid water), F = 96485 C/mol.

n = 2. \(E^\circ = -\Delta G^\circ/(nF) = 237100/(2\times96485) = 1.229\) V ≈ 1.23 V. Maximum efficiency \(= \Delta G/\Delta H = 237.1/285.8 = 0.830\), that is 83 percent.

Example 2. A fuel cell stack must supply 48 V. If each cell gives 0.7 V under load, how many cells are needed? What is the voltage efficiency of each cell?

Cells \(= 48/0.7 = 68.6\), so 69 cells in series. Voltage efficiency \(= 0.7/1.229 = 0.57\), about 57 percent.

Example 3. How much hydrogen is needed to produce 1 kWh of electricity in a fuel cell of 50 percent efficiency (based on ΔH = 285.8 kJ/mol)?

Energy input \(= 3.6\ \text{MJ}/0.5 = 7.2\) MJ. Moles of H2 \(= 7200/285.8 = 25.2\) mol. Mass \(= 25.2\times2.016 = 50.8\) g, about 51 g of hydrogen per kWh.

Example 4. How much ethanol can theoretically be obtained from 1 kg of glucose?

\(C_6H_{12}O_6 \rightarrow 2C_2H_5OH + 2CO_2\): 180.16 g glucose gives 2 × 46.07 = 92.14 g ethanol. From 1 kg: \(1000\times92.14/180.16 = 511\) g, about 0.51 kg.

Example 5. A farmer has 10 cattle, each giving 10 kg of fresh dung per day. If 1 kg of fresh dung yields 0.036 m³ of biogas with 60 percent methane, find the daily biogas and its energy (CH4 calorific value 35.8 MJ/m³).

Dung = 100 kg/day; biogas \(= 100\times0.036 = 3.6\) m³/day. Energy per m³ \(= 0.6\times35.8 = 21.5\) MJ, so total \(= 3.6\times21.5 = 77.3\) MJ per day.

Important questions and answers

Q1. Define biomass. Explain its sources with examples. (5 marks)

Definition as above with photosynthesis equation. Sources: wood (firewood, forest and mill residues, energy plantations); agricultural crops (straw, husk, bagasse, stalks; sugar cane and maize for ethanol; jatropha and karanja for biodiesel); animal waste (cattle dung, poultry litter for biogas); algae (fast growing, oil rich, grown on wastewater, for biodiesel and biogas); sewage waste (sewage sludge and organic municipal waste for biogas and waste-to-energy).

Q2. Give the advantages and disadvantages of biomass energy. (5 marks)

Advantages: renewable, widely available, carbon neutral if sustainable, uses waste, storable and dispatchable, reduces oil imports, rural jobs, low sulphur, manure by-product. Disadvantages: low energy density and bulky, seasonal, high collection and transport costs, food versus fuel conflict, land and water needs, inefficient traditional burning and indoor smoke, deforestation if overused, ash and tar problems.

Q3. Explain pyrolysis and gasification of biomass. (6 marks)

Pyrolysis: heating without oxygen at 300 to 700 °C breaks biomass into char, bio-oil and gas; slow pyrolysis for charcoal, fast pyrolysis for bio-oil; products used as fuels and biochar. Gasification: partial oxidation at 700 to 1100 °C with limited air or steam in a gasifier with drying, pyrolysis, oxidation (\(C + O_2 \rightarrow CO_2\)) and reduction (\(C + CO_2 \rightarrow 2CO\), \(C + H_2O \rightarrow CO + H_2\)) zones; producer gas (CO, H2, CH4, CO2, N2; about 5 MJ/m³) used in engines, boilers and furnaces; syngas for chemicals and synthetic fuels. Difference: pyrolysis uses no oxygen and aims at solid and liquid fuels; gasification uses some oxygen and aims at gas.

Q4. Explain anaerobic decomposition of biomass with the stages and factors affecting biogas production. (6 marks)

Stages: hydrolysis, acidogenesis, acetogenesis, methanogenesis (with reactions). Product: biogas (50 to 70 percent CH4, 30 to 45 percent CO2, traces of H2S). Factors: temperature (mesophilic 30 to 40 °C), pH 6.8 to 7.5, C/N ratio 20 to 30, solids 8 to 10 percent, retention time, absence of oxygen and toxins, mixing. Plants: KVIC floating drum and Deenbandhu fixed dome; digested slurry as manure.

Q5. Explain the direct and indirect uses of biomass. (5 marks)

Direct: combustion for heat in cookstoves, industrial boilers, dryers and kilns; steam for power and bagasse cogeneration in sugar mills; pellets co-fired with coal. Indirect: conversion to biofuels: biogas and bio-CNG by digestion; bioethanol by fermentation (\(C_6H_{12}O_6 \rightarrow 2C_2H_5OH + 2CO_2\)) for petrol blending; biodiesel by transesterification of oils with methanol; producer gas and syngas by gasification; bio-oil and charcoal by pyrolysis. Indirect use gives cleaner, convenient, transportable fuels.

Q6. Explain the construction and working of a hydrogen-oxygen fuel cell with reactions. Give its advantages and limitations. (6 marks)

Construction: porous carbon or nickel electrodes with Pt catalyst; electrolyte (KOH solution in alkaline cell or proton exchange membrane); H2 supplied to anode, O2 to cathode; external circuit. Reactions (alkaline): anode \(2H_2 + 4OH^- \rightarrow 4H_2O + 4e^-\); cathode \(O_2 + 2H_2O + 4e^- \rightarrow 4OH^-\); overall \(2H_2 + O_2 \rightarrow 2H_2O\). (PEM: anode \(H_2 \rightarrow 2H^+ + 2e^-\), cathode \(\tfrac{1}{2}O_2 + 2H^+ + 2e^- \rightarrow H_2O\).) E° = 1.23 V. Advantages: high efficiency (not Carnot limited), pollution-free (only water), silent, continuous operation while fuel is supplied, water usable by astronauts. Limitations: costly catalysts and membranes, hydrogen production and storage, CO poisoning, durability. Uses: spacecraft, vehicles, backup power.

Exam tips

FAQs

Is biogas the same as natural gas?

Both are mainly methane, but biogas has 30 to 45 percent CO2 and traces of H2S. After removing these impurities it becomes bio-methane, which can replace CNG.

Why is the theoretical efficiency of a fuel cell higher than that of an engine?

An engine converts heat into work and is limited by the Carnot efficiency. A fuel cell converts chemical free energy directly into electrical work, limited only by ΔG/ΔH.

Why are algae considered a promising biomass?

They grow much faster than land crops, can have high oil content, need no farmland and can use wastewater and CO2 from flue gas. Harvesting and drying costs still make them expensive.

Is hydrogen a source of energy?

No, it is an energy carrier. It must be produced using another energy source (natural gas or electricity), and a fuel cell then converts it back to electricity.

These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Environmental Chemistry and Non-conventional Energy Sources) and were prepared with AI help and checked.

Practise this on Doubtly (free)