Doubtly
@Doubtly · Joined Feb 2021
- Answers
- 3,792
- Questions
- 4,033
- Upvotes received
- 424
- Find the pressure 200 m below the surface of the ocean if pressure on the free surface of liquid is one atmosphere Correct Answer= 21.789×10^(5 )N/m² Explaination:: Given : h=200 m, ρ=1060 kg/m^(3 )p_(0 )= 1.013×10^(5 )Pa, g = 9.8 m/s² Absolute pressure,... 1
- Derive an expression for capillary rise for a liquid having a concave meniscus. Consider a capillary tube of radius r partially immersed into a wetting liquid of density p. Let the capillary rise be h and q be the angle... 1
- Explain the capillary action When a capillary tube is partially immersed in a wetting liquid, there is a capillary rise and the liquid meniscus inside the tube is concav... 1
- Derive an expression of excess pressure inside a liquid drop . Consider a spherical drop of radius R and surface tension T Let p_i be the pressure inside the drop and p₀ be the pressure outside it. As th... 1
- Why does the speed of a liquid increase and its pressure decrease when a liquid passes through constriction in a horizontal pipe? Consider a horizontal constricted tube. Let A_(1 )and A₂ be the cross-sectional areas at points P₁ and P₂, respectively. Let v₁ and v₂ be th... 1
- Why does velocity increase when water flowing in broader pipe enters a narrow pipe? When a tube narrows, the same volume occupies a greater length, as schematically shown in Fig. A₁ is the cross section of the broader pipe a... 1
- Why two or more mercury drops form a single drop when brought in contact with each other? A spherical shape has the minimum surface area-to-volume ratio of all geometric forms. When two drops of a liquid are brought in contact, th... 1
- What is an incompressible fluid? A fluid which does not undergo change in volume for a large range of pressures. Thus, its density remains constant throughout the fluid for... 1
- Why is a low density liquid used as a manometric liquid in a physics laboratory? An open tube manometer measures the gauge pressure, p = p0 + hρg, where p is the pressure being measured, p0 is the atmospheric pressure, h... 1
- What is the basis of the Bernoulli's principle? Conservation of energy is the basis of the Bernoulli’s principle Bernoulli’s equation states that the work done per unit volume of a fluid b... 1
- How much amount of work is done in forming a soap bubble of radius r? Let T be the surface tension of a soap solution. The initial surface area of soap bubble = 0 The final surface area of soap bubble = 2 × 4πr... 1
- Why is the surface tension of paints and lubricating oils kept low? For better wettability (surface coverage), the surface tension and angle of contact of paints and lubricating oil must be low. 1
- 1) Multiple Choice Questions chapter 2 Mechanical Properties of Fluids maharashtra board i) A hydraulic lift is designed to lift heavy objects of maximum mass 2000 kg. The area of cross section of piston carrying the load is 2.25... 1
- b) Vegetation is scarce in the high altitude of the Himalayas. As the altitude increases, the temperature decreases. The climate is very cold in the high altitudes. In Jammu and Kashmir and parts of Hima... 1
- a) The northern part of Brazil is covered with dense forests. The northern part of Brazil lies in the equatorial region.It receives ample sunlight and about 2000 mm of rainfall throughout the year.In th... 1
- E) Why does the deciduous type vegetation occupy most of India? Vegetation in a region is affected by the climate and rainfall of the region. In dia lies in the tropical zone and it has a monsoon type cli... 1
- D) What are the major causes of degradation of forest in Brazil and India? The major causes of degradation of forest in Brazil and India are India Overgrazing, soil degradation, land clearance, climatic changes, exc... 2
- C) What environmental issues are faced by Brazil and India? The biggest environmental issue faced by Brazil is the deforestation of the Amazon rainforests. The Amazon rainforests are known as the ‘lun... 1