Skip to content
doubtly

1 answer

Answer: in a graded-index fibre the refractive index decreases from the axis outwards, so rays that travel longer paths away from the axis also travel faster. All rays therefore reach the end at nearly the same time, which greatly reduces multipath (intermodal) dispersion.

The problem: in a multimode step-index fibre, a ray travelling along the axis covers the shortest distance, while rays making large angles zig-zag and cover a much longer distance. All travel at the same speed \(c/n_1\), so the oblique rays arrive later. A short input pulse is spread out (broadened); this is multipath dispersion, and it limits the data rate.

How graded index overcomes it:

  • The core refractive index is maximum at the axis and decreases gradually (nearly parabolically) towards the cladding.
  • Rays bend continuously and follow curved (sinusoidal) paths instead of zig-zags.
  • The axial ray has the shortest path but travels entirely in the highest-index region, so it moves slowest (\(v = c/n\)).
  • Rays that swing far from the axis have longer paths, but spend most of their time in lower-index regions where they move faster.
  • The extra speed compensates for the extra path, so all modes take almost the same time to travel the fibre.

As a result, pulse broadening is much smaller and the bandwidth of a graded-index fibre is much higher than that of a step-index multimode fibre.

Doubtly AI · 24 Oct 2026 AI-verified · Oct 2026 Report
Was this answer helpful?

Your answer

Log in or create a free account to answer this question.