Answer: two common methods are ball milling (a top-down method) and the sol-gel process (a bottom-up method).
1. Ball milling (top-down)
- Set-up: a hollow cylindrical vial of hardened steel or tungsten carbide holds hard balls and the bulk material in powder form. In a planetary ball mill the vials rotate about their own axes while the supporting disc rotates in the opposite direction.
- Working: during rotation the balls are lifted and fall or roll, hitting the powder with high energy. Repeated impact and shear break the particles into finer pieces; after several hours of milling the particles reach the nanometre range. Particle size depends on speed, time, ball size and ball-to-powder ratio.
- Merits: simple, cheap, large quantities, can also be used for mechanical alloying.
- Demerits: contamination from balls and vial, irregular shapes, wide size distribution, lattice defects.
2. Sol-gel process (bottom-up)
- Precursor: a metal alkoxide (e.g. tetraethyl orthosilicate, TEOS, for silica) or metal salt is dissolved in a solvent such as alcohol.
- Hydrolysis: water is added (with acid or base catalyst): \(\mathrm{M{-}OR + H_2O \rightarrow M{-}OH + ROH}\).
- Condensation: the M–OH groups link up, releasing water or alcohol: \(\mathrm{M{-}OH + HO{-}M \rightarrow M{-}O{-}M + H_2O}\). This forms a sol, a colloidal suspension of tiny particles.
- Gelation: further linking creates a continuous 3-D network filled with solvent, the gel.
- Ageing, drying and calcination: the gel is aged, dried (giving a xerogel, or an aerogel by supercritical drying) and heated to obtain nanoparticles, thin films or porous oxide materials.
- Merits: low temperature, high purity and homogeneity, good control of particle size and composition, can make coatings and films.
- Demerits: precursors can be expensive, long processing time, shrinkage and cracking during drying.