#units-dimensions-and-measurement-nta
- A student measured the length of a rod and wrote it as 3.50 cm. Which instrument did he use to measure it? Measured length of rod = 3.50 cm That means least count of the measuring instrument should be 0.01 cm = 0.1 mm For vernier scale 1 main scal... 1
- Resistance of a given wire is obtained by measuring the current flowing in it and the voltage difference applied across it. If the percentage Correct option is A) 6% We know R = V over I thereforeΔ R over R = Δ V over V + Δ I over I Percentage error in R = Δ R over R × 100 = Δ V ov... 1
- A body of mass m = 3.513 kg is moving along the x-axis with a speed of 5.00 ms−1. The magnitude of its momentum is recorded as Momentum, p = m × v = 3.513 × 5.00 = 17.565 kg m/s = 17.6 kg m/s Here number of significant digits in m is 4 and in v is 3, so, p must have... 1
- Dimensions of 1/u0E0 where symbols have their usual meaning, are Correct option is C) [ L²T⁻² ] Explaination:: The velocity of light in vacuum is c = 1 over sqrt μ ₀ε ₀ therefore[1 over μ ₀ε ₀] = [c²] = [L... 1
- The length of sides of a cuboid are a, 2a and 3a . if the relative percentage error in the measurement of a 1% , then what is the relative percentage error Correct answer is 3 1
- Dimensional analysis of the equation correct answer is 3 1
- The pressure on a square plate is measured by measuring the force on the plate and the length of the sides of the plate . If the maximum errors in the Correct option is d) 8% 1
- The length and breadth of a metal sheet are 3.124m and 3.002 m respectively. the area of this sheet up to the correct number of significant Correct option is A) 9.378 m² result must have significant figures equal to least figures being multiplid do area of metal sheet 9.378 m² (f... 1
- In the formula , a=3bc2 , a and c have dimensions of electric capicitance and magnetic field intensity respectively . Correct option is A) A) [M⁻³L⁻²T⁴Q⁴] 1
- In a CGS system of units , the density of a material is 4 g cm^-3 . what will be the value of the density of the material Correct option is C) 40 1
- in a new system of units , the unit of force is 100 N , unit of length is 10 m and unit of time is 100s , unit of mass in this system can be expressed as Correct option is A) 10⁵kg Substituting value of L and T from equation 2 and 3 in eq 1 we get 1
- The accuracy in the measurement of time for 20 oscillations of a pendulum for the following measurement correct option is A)±0.2s 1
- The potential difference across a resistor is measured to be V=(8±0.5) V and current Correct option is A) 4±16.25% 1
- If The Unit Of Mass, Length And Time Are Doubled,unit Of Angular Momentum Will Be Correct answer is option C) Quadrupled hence , unit of angular momentumn is quadrupled 1