Skip to content
doubtly

Geometric Constructions Class 10 Notes, Formulas, Questions | SSC

Doubtly 10 min read Updated 25 Oct 2026 Save WhatsApp Save as PDF
On this page

This chapter applies the theorems of similarity and circles to ruler and compass constructions. It first shows how to construct a triangle similar to a given triangle when the ratio of corresponding sides is given, both when the triangles have no common vertex and when they share a vertex. It then shows how to draw a tangent at a point on a circle, with and without using the centre, and how to draw two tangents to a circle from a point outside it.

Summary

Recall constructions from earlier standards: drawing a line parallel to a given line through a given point, the perpendicular bisector of a segment, a triangle from its sides, dividing a segment into a given number of equal parts or in a given ratio, and an angle congruent to a given angle. Similar figures are needed in maps, building plans, geography and machine drawing, and the triangle is the simplest closed figure to start with.

Similar triangle with no common vertex: since corresponding sides of similar triangles are proportional, the sides of the new triangle are calculated from the given ratio and the triangle is drawn from its three sides. For example, if \( \triangle ABC \sim \triangle PQR \) with AB = 5.4 cm, BC = 4.2 cm, AC = 6.0 cm and AB : PQ = 3 : 2, then PQ = 3.6 cm, QR = 2.8 cm and PR = 4.0 cm. If a calculated length is hard to measure with a scale, it can be obtained by dividing a segment into equal parts.

Similar triangle with a common vertex, smaller triangle: to construct \( \triangle A'BC' \sim \triangle ABC \) with AB : A'B = 5 : 3, draw \( \triangle ABC \), divide BC into 5 equal parts (by drawing a ray from B on the side opposite A, marking 5 equal steps and drawing parallels), take C' at the end of the third part so that \( BC' = \dfrac{3}{5} BC \), and draw through C' a line parallel to CA meeting AB at A'. The basic proportionality theorem guarantees the required ratio.

Similar triangle with a common vertex, bigger triangle: for AB : A'B = 5 : 7, divide BC into 5 equal parts and mark C' on ray BC at a distance of 7 such parts from B. A line through C' parallel to AC meets ray BA at A', and \( \triangle A'BC' \) is the required triangle. In both cases the angle at B is common, so the triangles are similar.

Tangent at a point on a circle using the centre: a line perpendicular to a radius at its outer end is a tangent. Draw ray CP from the centre C through the point P and draw the line through P perpendicular to ray CP; it is the tangent at P.

Tangent at a point without using the centre: by the tangent-secant angle theorem, the angle between a tangent and a chord equals the angle inscribed in the opposite arc. Draw a chord CB and an inscribed angle CAB, then copy \( \angle CAB \) at C on the chord CB on the other side to get \( \angle BCD \). Line CD is the tangent at C, by the converse of the tangent-secant angle theorem; the copied angles are congruent because the triangles formed by the arcs are congruent by the SSS test.

Tangents from an external point: if PA and PB are tangents from P to a circle with centre O, then \( \angle OAP = \angle OBP = 90^\circ \), so A and B lie on the circle with diameter OP (angle in a semicircle). Draw the perpendicular bisector of OP to get its midpoint M, draw the circle with centre M and radius MO, mark its intersections A and B with the given circle and draw lines PA and PB.

Mind map

Geometric Constructions

  • Similar triangles
    • No common vertex: calculate sides
    • Common vertex: divide a side into equal parts
    • Smaller triangle (ratio like 5:3)
    • Bigger triangle (ratio like 5:7)
  • Tangent at a point
    • Using centre: perpendicular to radius
    • Without centre: tangent-secant angle converse
  • Tangents from outside point
    • Circle on OP as diameter
    • Angle in semicircle is 90 degrees
    • Two equal tangents
  • Theorems used
    • Basic proportionality theorem
    • Tangent theorem and converse
    • Angle in a semicircle
    • Tangent-secant angle theorem

Constructing tangents to a circle from an external point P

  1. Draw a circle with centre O and take a point P outside it.
  2. Draw seg OP and construct its perpendicular bisector to get its midpoint M.
  3. With centre M and radius MO draw a circle; it passes through O and P.
  4. Name the points where this circle cuts the given circle as A and B.
  5. Draw lines PA and PB; these are the required tangents.
  6. Reason: angles OAP and OBP are angles in semicircles, so they are right angles and PA, PB are perpendicular to the radii OA, OB.

Important definitions

TermMeaning
Similar trianglesTriangles with congruent corresponding angles and proportional corresponding sides.
Rough figureA freehand sketch drawn before the construction to plan the steps and mark known measures.
AnalysisThe reasoning, based on theorems, that shows why the construction steps give the required figure.
TangentA line touching the circle at exactly one point; it is perpendicular to the radius at that point.
Point of contactThe single point common to a circle and its tangent.

Formulas

FormulaMeaning
\( \dfrac{AB}{PQ} = \dfrac{BC}{QR} = \dfrac{AC}{PR} = k \)For \( \triangle ABC \sim \triangle PQR \); each side of PQR = corresponding side of ABC divided by k.
\( BC' = \dfrac{m}{n} \times BC \) when \( AB : A'B = n : m \)Position of C' on ray BC when constructing triangle A'BC' with common vertex B.
\( PA = PB = \sqrt{OP^2 - r^2} \)Length of each tangent segment from P to a circle with centre O and radius r; useful to check a construction.

Key points to remember

  • Always draw a rough figure and write the analysis before the actual construction.
  • If the ratio's first term (given triangle) is larger, the new triangle is smaller, and vice versa.
  • To divide BC into equal parts, draw the auxiliary ray from B on the side of BC opposite to A.
  • Only one tangent can be drawn at a point on a circle; at most two tangents can be drawn from a point outside it; none from a point inside.
  • Tangents drawn at the ends of a diameter are parallel to each other.
  • Keep the construction lines and arcs visible; do not erase them.

Solved examples

Example 1. \( \triangle ABC \sim \triangle PQR \). In \( \triangle ABC \), AB = 5.4 cm, BC = 4.2 cm, AC = 6.0 cm and AB : PQ = 3 : 2. Find the sides of \( \triangle PQR \) needed to construct it.

\( \dfrac{AB}{PQ} = \dfrac{BC}{QR} = \dfrac{AC}{PR} = \dfrac{3}{2} \). So \( PQ = \dfrac{2}{3} \times 5.4 = 3.6 \) cm, \( QR = \dfrac{2}{3} \times 4.2 = 2.8 \) cm and \( PR = \dfrac{2}{3} \times 6.0 = 4.0 \) cm. Construct \( \triangle ABC \) and \( \triangle PQR \) from their three sides.

Example 2. \( \triangle ABC \sim \triangle LMN \) with AB = 5.5 cm, BC = 6 cm, CA = 4.5 cm and \( \dfrac{BC}{MN} = \dfrac{5}{4} \). Find the sides of \( \triangle LMN \).

Each side of \( \triangle LMN \) is \( \dfrac{4}{5} \) of the corresponding side of \( \triangle ABC \): \( LM = \dfrac{4}{5} \times 5.5 = 4.4 \) cm, \( MN = \dfrac{4}{5} \times 6 = 4.8 \) cm, \( LN = \dfrac{4}{5} \times 4.5 = 3.6 \) cm.

Example 3. Construct any \( \triangle ABC \) and \( \triangle A'BC' \sim \triangle ABC \) such that AB : A'B = 5 : 3. Write the steps.

Analysis: B is common, \( \angle ABC = \angle A'BC' \) and \( \dfrac{BC}{BC'} = \dfrac{5}{3} \), so \( BC' = \dfrac{3}{5} BC \). Steps: (1) Construct any \( \triangle ABC \). (2) Divide seg BC into 5 equal parts. (3) Name the end of the third part from B as C'. (4) Through C' draw a line parallel to AC meeting AB at A'. (5) \( \triangle A'BC' \) is the required triangle.

Example 4. Construct \( \triangle A'BC' \sim \triangle ABC \) such that AB : A'B = 5 : 7. Write the steps.

Analysis: the new triangle is bigger and \( BC' = \dfrac{7}{5} BC \). Steps: (1) Construct any \( \triangle ABC \). (2) Divide seg BC into 5 equal parts and mark C' on ray BC so that BC' equals 7 such parts. (3) Through C' draw a line parallel to AC meeting ray BA at A'. (4) \( \triangle A'BC' \) is the required triangle (basic proportionality theorem).

Example 5. Draw a circle with centre O and radius 3.5 cm and take a point P at a distance of 5.7 cm from O. Draw tangents from P and find their approximate length by calculation.

Steps: draw the circle, mark P with OP = 5.7 cm, bisect OP to get M, draw the circle with centre M and radius MO cutting the given circle at A and B, and draw lines PA and PB. Check: \( PA = PB = \sqrt{5.7^2 - 3.5^2} = \sqrt{32.49 - 12.25} = \sqrt{20.24} \approx 4.5 \) cm, so measured tangent lengths should be about 4.5 cm.

Example 6. Draw a circle and construct a tangent at a point C on it without using the centre. Write the steps.

(1) Draw a circle and take a point C on it. (2) Draw a chord CB and an inscribed \( \angle CAB \) with A on the circle. (3) With centre A and a convenient radius draw an arc cutting the arms of \( \angle BAC \) at M and N. (4) With the same radius and centre C draw an arc cutting chord CB at R. (5) With radius MN and centre R draw an arc cutting the previous arc at D. (6) Draw line CD; it is the required tangent, since \( \angle BCD = \angle CAB \) (converse of the tangent-secant angle theorem).

Important questions and answers

Q1. Choose the correct alternative: the number of tangents that can be drawn to a circle at a point on the circle is (A) 3 (B) 2 (C) 1 (D) 0.

(C) 1.

Q2. Choose the correct alternative: the maximum number of tangents that can be drawn to a circle from a point outside it is (A) 2 (B) 1 (C) one and only one (D) 0.

(A) 2.

Q3. If \( \triangle ABC \sim \triangle PQR \) and \( \dfrac{AB}{PQ} = \dfrac{7}{5} \), which triangle is bigger?

\( \triangle ABC \) is bigger, because each of its sides is \( \dfrac{7}{5} \) times the corresponding side of \( \triangle PQR \).

Q4. Why does the circle drawn with OP as diameter give the points of contact of the tangents from P?

If A is a point of contact, \( \angle OAP = 90^\circ \) by the tangent theorem. Every point that sees OP at a right angle lies on the circle with diameter OP (angle in a semicircle is a right angle). So the points of contact are the intersections of this circle with the given circle.

Q5. Draw a circle of radius 3.3 cm and a chord PQ of length 6.6 cm. Draw tangents at P and Q. What do you observe?

A chord of length 6.6 cm in a circle of radius 3.3 cm is a diameter. Tangents at the ends of a diameter are both perpendicular to the same line PQ, so the tangents at P and Q are parallel.

Q6. Explain how to construct a tangent at a point P on a circle with centre C using the centre.

Draw ray CP. Through P draw the line l perpendicular to ray CP. Since a line perpendicular to a radius at its point on the circle is a tangent (converse of tangent theorem), line l is the tangent at P.

Q7. \( \triangle PQR \sim \triangle LTR \) with PQ = 4.2 cm, QR = 5.4 cm, PR = 4.8 cm and \( \dfrac{PQ}{LT} = \dfrac{3}{4} \). Find the sides of \( \triangle LTR \).

Each side of \( \triangle LTR \) is \( \dfrac{4}{3} \) of the corresponding side: \( LT = \dfrac{4}{3} \times 4.2 = 5.6 \) cm, \( TR = \dfrac{4}{3} \times 5.4 = 7.2 \) cm, \( LR = \dfrac{4}{3} \times 4.8 = 6.4 \) cm. Since R is a common vertex, the triangle can also be drawn by extending RP and RQ.

Q8. Give reason: in the common-vertex construction, \( \triangle A'BC' \sim \triangle ABC \).

Line A'C' is drawn parallel to AC, so corresponding angles \( \angle BA'C' = \angle BAC \) and \( \angle BC'A' = \angle BCA \). Hence the triangles are similar by the AA test, and \( \dfrac{BA'}{BA} = \dfrac{BC'}{BC} \) by the basic proportionality theorem.

Q9. How many tangents can be drawn to a circle from a point inside the circle? Why?

None. Every line through an interior point cuts the circle in two points, so it is a secant, not a tangent.

Exam tips

  • Write the analysis and draw a rough figure with measures before constructing; marks are given for them.
  • Show the calculations of the new sides when there is no common vertex.
  • Use a sharp pencil and keep all construction arcs; label every point named in the question.
  • For tangents from an external point, measure and write the lengths of both tangent segments; they should be equal.
  • Check the ratio direction carefully: AB : A'B = 5 : 3 means the new triangle is smaller.

FAQs

What theorem is behind the construction of similar triangles with a common vertex?

The basic proportionality theorem: a line through C' parallel to AC divides the sides of the triangle in the same ratio, so the new triangle has sides in the required ratio.

Why do we draw a circle on OP as diameter for tangents from P?

Because the angle in a semicircle is a right angle, the points where this circle meets the given circle make right angles with the radii, which is exactly the condition for tangents.

Can a tangent be drawn without knowing the centre?

Yes. Copy an inscribed angle at the point using a chord through it; by the converse of the tangent-secant angle theorem the line obtained is a tangent.

These notes were prepared with AI help from the Balbharati Geometry (Mathematics Part II) textbook (2026-27) and checked against it.

More in Mathematics Part 2 (Geometry)

See all →