Skip to content
doubtly

Fuel Cell Notes FE Sem 2 Physics for Emerging Fields | MU

Doubtly 16 min read Updated 27 Oct 2026 Save WhatsApp Save as PDF
On this page

A fuel cell produces electricity from hydrogen and oxygen, and its only exhaust is water and heat. Unlike a battery it does not run down as long as fuel is supplied, and unlike an engine it does not burn the fuel, so it can be much more efficient and almost silent. Fuel cells power buses, cars, forklifts, back-up generators for telecom towers and data centres, and they powered the Apollo and Space Shuttle missions. This module of Physics for Emerging Fields introduces fuel cells, classifies them, and explains the construction and working of four important types: the alkaline fuel cell, the molten carbonate fuel cell, the polymer electrolyte membrane fuel cell and the solid oxide fuel cell. It maps to course outcome CO4 (describe various fuel cells and their components).

Summary

Introduction: A fuel cell is an electrochemical device that converts the chemical energy of a fuel (usually hydrogen) and an oxidant (oxygen or air) directly into electrical energy, with heat and water as by-products, as long as fuel and oxidant are supplied. The idea was demonstrated by William Grove in 1839 (the "gas voltaic battery"). Every fuel cell has three essential parts: an anode (fuel electrode, negative terminal) where the fuel is oxidised and releases electrons, a cathode (air electrode, positive terminal) where oxygen is reduced by taking electrons, and an electrolyte between them that conducts ions but not electrons. The electrons released at the anode cannot pass through the electrolyte, so they travel through the external circuit to the cathode, doing useful work on the way; the ions complete the circuit inside the cell. The overall reaction for a hydrogen fuel cell is \(\text{H}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{H}_2\text{O}\). A practical cell also has catalysts (platinum or nickel) to speed up the electrode reactions, porous gas diffusion electrodes, and bipolar plates with flow channels that distribute gases and connect cells in series to form a stack.

Why fuel cells: A heat engine is limited by the Carnot efficiency \(1 - T_c/T_h\), whereas a fuel cell converts the Gibbs free energy of the reaction directly into electrical work, so its theoretical efficiency \(\Delta G/\Delta H\) is about 83 percent for hydrogen at 25 °C (using the higher heating value). Practical electrical efficiencies are about 40 to 60 percent, and up to about 80 to 90 percent total when the waste heat is also used (combined heat and power). The ideal cell voltage is \(E^0 = -\Delta G/nF = 1.23\) V for hydrogen and oxygen at 25 °C. In operation the voltage is lower, typically 0.6 to 0.8 V, because of activation losses (slow electrode reactions, dominant at low current), ohmic losses (resistance of electrolyte and contacts, in the middle range) and concentration or mass-transport losses (reactants cannot reach the electrodes fast enough, at high current). The graph of cell voltage against current density is the polarisation curve. Advantages: high efficiency, zero or low emissions (only water from hydrogen), quiet operation, no moving parts in the cell, modular sizes from watts to megawatts, quick refuelling. Disadvantages: high cost (platinum catalyst, membranes), hydrogen production, storage and distribution problems, sensitivity to impurities (CO poisoning of platinum), durability issues, and slow start-up for high temperature types.

Classification of fuel cells: Fuel cells are mainly classified by the electrolyte, which also decides the operating temperature, the ion that moves, and the catalyst. (i) Alkaline fuel cell (AFC): aqueous KOH electrolyte, OH⁻ ions carry charge, about 60 to 90 °C (some designs higher). (ii) Polymer electrolyte membrane or proton exchange membrane fuel cell (PEMFC): a solid proton-conducting polymer membrane such as Nafion, H⁺ ions, about 60 to 80 °C, platinum catalyst. (iii) Direct methanol fuel cell (DMFC): a PEM-type cell fed directly with methanol solution. (iv) Phosphoric acid fuel cell (PAFC): concentrated phosphoric acid in a SiC matrix, H⁺ ions, about 150 to 200 °C. (v) Molten carbonate fuel cell (MCFC): molten Li/K carbonates held in a ceramic (LiAlO2) matrix, CO₃²⁻ ions, about 650 °C, nickel catalysts. (vi) Solid oxide fuel cell (SOFC): solid ceramic (yttria-stabilised zirconia, YSZ), O²⁻ ions, about 600 to 1000 °C. By temperature they are grouped as low temperature (AFC, PEMFC, DMFC, below about 100 °C), medium (PAFC, about 200 °C) and high temperature (MCFC and SOFC, 600 °C and above). They can also be classified by fuel (hydrogen, methanol, natural gas) and by whether the fuel is reformed outside (external) or inside the cell (internal reforming, possible in hot MCFC and SOFC).

Alkaline fuel cell (AFC): Construction: two porous carbon or nickel electrodes containing catalyst (nickel, silver or small amounts of platinum) separated by an aqueous solution of potassium hydroxide (30 to 45 percent) held in a matrix or circulated. Hydrogen is fed to the anode and pure oxygen to the cathode. Working: at the anode, hydrogen reacts with hydroxide ions: \(\text{H}_2 + 2\text{OH}^- \rightarrow 2\text{H}_2\text{O} + 2e^-\). Electrons flow through the external load to the cathode, where oxygen and water take them: \(\tfrac{1}{2}\text{O}_2 + \text{H}_2\text{O} + 2e^- \rightarrow 2\text{OH}^-\). The OH⁻ ions move through the electrolyte from cathode to anode. Overall: \(\text{H}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{H}_2\text{O}\). Water forms at the anode and must be removed. Features: fast oxygen reduction in alkaline medium, so cheaper non-noble catalysts can be used, high efficiency (up to about 60 percent electrical); but CO2 in the air reacts with KOH to form potassium carbonate, which blocks the electrolyte and electrodes, so pure gases are needed. Used in the Apollo and Space Shuttle programmes, where it also supplied drinking water to the crew.

Molten carbonate fuel cell (MCFC): Construction: the electrolyte is a mixture of molten lithium and potassium carbonates held in a porous ceramic matrix of lithium aluminate (LiAlO2). The anode is porous nickel (with chromium or aluminium) and the cathode is porous lithiated nickel oxide. It works at about 650 °C, where the carbonates melt and become good conductors of CO₃²⁻ ions. Working: at the anode, \(\text{H}_2 + \text{CO}_3^{2-} \rightarrow \text{H}_2\text{O} + \text{CO}_2 + 2e^-\) (CO can also be used as fuel: \(\text{CO} + \text{CO}_3^{2-} \rightarrow 2\text{CO}_2 + 2e^-\)). At the cathode, \(\tfrac{1}{2}\text{O}_2 + \text{CO}_2 + 2e^- \rightarrow \text{CO}_3^{2-}\). Carbonate ions move from cathode to anode. CO2 produced at the anode is recycled to the cathode. Features: high temperature means no precious metal catalyst is needed, natural gas or biogas can be reformed inside the cell, CO is a fuel rather than a poison, efficiency is about 45 to 50 percent electrical and higher with heat recovery. Disadvantages: corrosive molten electrolyte, slow start-up, short life of components. Used for stationary megawatt-scale power plants.

Polymer electrolyte membrane fuel cell (PEMFC): Construction: the heart is the membrane electrode assembly (MEA): a thin (about 25 to 180 μm) solid polymer membrane such as Nafion (a perfluorosulfonic acid polymer) that conducts protons when hydrated, coated on both sides with a catalyst layer of platinum nanoparticles on carbon, and covered by porous gas diffusion layers of carbon paper or cloth. Graphite or metal bipolar plates with machined flow channels sit on both sides, bring hydrogen and air, remove water and conduct current. Working at about 60 to 80 °C: at the anode, \(\text{H}_2 \rightarrow 2\text{H}^+ + 2e^-\). Protons pass through the membrane; electrons go through the external circuit. At the cathode, \(\tfrac{1}{2}\text{O}_2 + 2\text{H}^+ + 2e^- \rightarrow \text{H}_2\text{O}\). Water forms at the cathode. Features: high power density, low weight, quick start-up, solid electrolyte (no leaks), suitable for vehicles and portable power; efficiency about 40 to 60 percent. Problems: expensive platinum, CO poisoning (needs very pure hydrogen), careful water management (membrane must stay wet but electrodes must not flood). Used in fuel cell cars, buses, forklifts and back-up power.

Solid oxide fuel cell (SOFC): Construction: the electrolyte is a dense ceramic, commonly yttria-stabilised zirconia (YSZ), that conducts oxide ions at high temperature. The anode is a porous nickel-YSZ cermet; the cathode is a porous perovskite such as strontium-doped lanthanum manganite (LSM); interconnects are ceramic or special steel. Cells are made in planar or tubular designs. Working at about 600 to 1000 °C: at the cathode, \(\tfrac{1}{2}\text{O}_2 + 2e^- \rightarrow \text{O}^{2-}\). O²⁻ ions move through the electrolyte to the anode, where \(\text{H}_2 + \text{O}^{2-} \rightarrow \text{H}_2\text{O} + 2e^-\) (and CO can also react: \(\text{CO} + \text{O}^{2-} \rightarrow \text{CO}_2 + 2e^-\)). Features: all solid-state, no precious metal catalyst, fuel flexible (hydrogen, natural gas, biogas, internal reforming), high electrical efficiency (about 50 to 60 percent, above 80 percent with heat use), high-grade waste heat for combined cycles. Disadvantages: long start-up time, thermal stresses and sealing problems, expensive high-temperature materials. Used for stationary power and combined heat and power.

Mind map

Fuel Cell

  • Introduction
    • Chemical to electrical energy directly
    • Anode, cathode, electrolyte
    • H2 + ½O2 → H2O
    • E0 = 1.23 V, η ideal about 83%
  • Losses
    • Activation
    • Ohmic
    • Concentration
    • Polarisation curve
  • Classification
    • By electrolyte and temperature
    • AFC, PEMFC, DMFC
    • PAFC
    • MCFC, SOFC
  • AFC
    • KOH, OH⁻ ions
    • 60 to 90 °C
    • CO2 sensitive, space use
  • MCFC
    • Li/K carbonate, CO₃²⁻
    • About 650 °C, Ni electrodes
    • CO2 recycled
  • PEMFC
    • Nafion membrane, H⁺
    • 60 to 80 °C, Pt catalyst
    • Vehicles
  • SOFC
    • YSZ ceramic, O²⁻
    • 600 to 1000 °C
    • Fuel flexible, CHP

General working of a hydrogen fuel cell

  1. Hydrogen is fed through flow channels to the porous anode; oxygen or air is fed to the porous cathode.
  2. At the anode catalyst, hydrogen molecules are split and oxidised, releasing electrons (in acid cells: \(\text{H}_2 \rightarrow 2\text{H}^+ + 2e^-\)).
  3. The electrolyte allows only ions to pass; electrons are forced into the external circuit.
  4. Electrons flow through the load from anode (negative) to cathode (positive), delivering electrical work.
  5. Ions move through the electrolyte: H⁺ to the cathode (PEMFC, PAFC) or OH⁻, CO₃²⁻, O²⁻ to the anode (AFC, MCFC, SOFC).
  6. At the cathode, oxygen combines with electrons and ions to form water (or to form the moving ion).
  7. Water and heat are removed; continuous supply of fuel and air keeps the cell running.
  8. Single cells give about 0.7 V, so many cells are stacked in series with bipolar plates to reach the required voltage; cell area sets the current.

Important definitions

TermMeaning
Fuel cellAn electrochemical cell that continuously converts the chemical energy of a supplied fuel and oxidant directly into electricity.
AnodeThe fuel electrode where oxidation takes place and electrons are released; negative terminal of a fuel cell.
CathodeThe oxidant electrode where reduction of oxygen takes place; positive terminal.
ElectrolyteThe medium that conducts ions between the electrodes but blocks electrons.
CatalystA material (Pt, Ni, Ag) on the electrodes that speeds up the electrode reactions without being consumed.
Membrane electrode assembly (MEA)The membrane with catalyst layers and gas diffusion layers on both sides; the core of a PEMFC.
Bipolar plateA conducting plate between adjacent cells that distributes gases, removes water and heat and connects cells in series.
Fuel cell stackMany cells connected in series to obtain a useful voltage and power.
ReformingConverting a hydrocarbon fuel such as natural gas into hydrogen-rich gas, for example \(\text{CH}_4 + \text{H}_2\text{O} \rightarrow \text{CO} + 3\text{H}_2\).
Polarisation curveGraph of cell voltage against current density showing activation, ohmic and concentration losses.
Thermodynamic efficiencyRatio of maximum electrical work (ΔG) to the enthalpy change (ΔH) of the reaction.
Combined heat and power (CHP)Using both the electricity and the waste heat of a fuel cell to raise overall efficiency.

Formulas

FormulaMeaning
\( \text{H}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{H}_2\text{O} \)Overall reaction of every hydrogen fuel cell.
\( E^0 = -\dfrac{\Delta G}{nF} \)Ideal (reversible) cell voltage; n = 2 electrons per H2, F = 96485 C/mol.
\( \eta_{max} = \dfrac{\Delta G}{\Delta H} \)Maximum thermodynamic efficiency; 237.1/285.8 = 0.83 for H2 at 25 °C (HHV).
\( \eta_{cell} = \dfrac{V_{cell}}{1.48\ \text{V}} \)Practical efficiency on HHV basis, 1.48 V being the thermoneutral voltage (ΔH/nF).
\( \dot{n}_{H_2} = \dfrac{I}{2F} \)Rate of hydrogen consumption (mol/s) for current I in one cell.
\( V_{stack} = N\,V_{cell},\ \ P = V_{stack}I \)Voltage and power of a stack of N cells in series.
\( V_{cell} = E^0 - \eta_{act} - IR - \eta_{conc} \)Operating voltage after activation, ohmic and concentration losses.
\( \eta_{Carnot} = 1 - \dfrac{T_c}{T_h} \)Limit for heat engines, which does not apply to fuel cells.

Key points to remember

  • A fuel cell needs continuous fuel supply; a battery stores its reactants inside.
  • Electrons go through the external circuit; ions go through the electrolyte.
  • The electrolyte decides the type, temperature, moving ion and catalyst.
  • Ion carriers: AFC OH⁻, PEMFC and PAFC H⁺, MCFC CO₃²⁻, SOFC O²⁻.
  • Water forms at the cathode in PEMFC and PAFC, and at the anode in AFC, MCFC and SOFC.
  • Temperatures: AFC 60 to 90 °C, PEMFC 60 to 80 °C, PAFC 150 to 200 °C, MCFC about 650 °C, SOFC 600 to 1000 °C.
  • Low temperature cells need platinum and pure hydrogen; high temperature cells use nickel and can reform hydrocarbons internally.
  • AFC is poisoned by CO2; PEMFC by CO; MCFC needs CO2 at the cathode.
  • Ideal voltage 1.23 V; practical 0.6 to 0.8 V per cell.
  • Fuel cells are not Carnot-limited; ideal efficiency for H2 is about 83 percent.

Solved examples

Example 1. For \(\text{H}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{H}_2\text{O}(l)\) at 25 °C, ΔG = −237.1 kJ/mol. Find the ideal cell voltage.

\(E^0 = -\Delta G/nF = 237.1\times10^{3}/(2\times96485) = 237100/192970 = 1.229\) V \(\approx 1.23\) V.

Example 2. ΔH for the same reaction is −285.8 kJ/mol. Find the maximum thermodynamic efficiency and the thermoneutral voltage.

\(\eta_{max} = \Delta G/\Delta H = 237.1/285.8 = 0.830 = 83\%\). Thermoneutral voltage \(= \Delta H/nF = 285.8\times10^{3}/192970 = 1.48\) V.

Example 3. A single PEM fuel cell delivers 100 A for 1 hour. Find the mass of hydrogen used and the mass of water produced.

Charge \(Q = It = 100\times3600 = 3.6\times10^{5}\) C. Moles of H2 \(= Q/2F = 3.6\times10^{5}/192970 = 1.866\) mol. Mass of H2 \(= 1.866\times2.016 = 3.76\) g. Each mole of H2 gives one mole of water: \(1.866\times18.015 = 33.6\) g of water.

Example 4. A stack of 50 cells operates at 0.7 V per cell and 200 A. Find the stack voltage, power and efficiency (HHV basis).

\(V = 50\times0.7 = 35\) V. \(P = 35\times200 = 7000\) W \(= 7\) kW. Efficiency \(= 0.7/1.48 = 0.473 \approx 47\%\); the remaining 53 percent of the hydrogen energy appears as heat, which can be used in a CHP system.

Example 5. Compare with a heat engine working between 600 K and 300 K.

\(\eta_{Carnot} = 1 - 300/600 = 0.5 = 50\%\), and a real engine achieves well below this. The fuel cell's ideal limit (83 percent) is higher because it is not a heat engine.

Important questions and answers

Q1. What is a fuel cell? Explain its principle and compare it with a battery. (5 marks)

A fuel cell is an electrochemical device that converts the chemical energy of a fuel and an oxidant directly into electrical energy as long as they are supplied. Principle: the overall reaction \(\text{H}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{H}_2\text{O}\) is split into two half reactions at separate electrodes; oxidation at the anode releases electrons, which travel through the external circuit to the cathode where oxygen is reduced; ions move through the electrolyte to complete the circuit. Comparison: both are electrochemical cells with anode, cathode and electrolyte. A battery stores a fixed amount of reactants and must be recharged or replaced; a fuel cell runs continuously with external fuel supply and is refuelled quickly. Battery electrodes take part in reactions and change; fuel cell electrodes are catalytic and do not change. Fuel cells give higher energy for long running times; batteries give quick response and are simpler.

Q2. Classify fuel cells. (5 marks)

By electrolyte (main basis): AFC (KOH, OH⁻, 60 to 90 °C), PEMFC (polymer membrane, H⁺, 60 to 80 °C), DMFC (polymer membrane fed with methanol, H⁺, 60 to 90 °C), PAFC (phosphoric acid, H⁺, 150 to 200 °C), MCFC (molten carbonate, CO₃²⁻, about 650 °C), SOFC (ceramic YSZ, O²⁻, 600 to 1000 °C). By temperature: low (AFC, PEMFC, DMFC), medium (PAFC), high (MCFC, SOFC). By fuel: hydrogen, methanol, natural gas or biogas. By reforming: external or internal. Present as a table with electrolyte, ion, temperature, catalyst, efficiency and applications.

Q3. Explain the construction and working of an alkaline fuel cell with reactions. (5 marks)

Diagram: two porous electrodes with an aqueous KOH electrolyte between them; H2 inlet on the anode side, O2 inlet on the cathode side, water and unused H2 outlet at the anode; external load connected between electrodes; arrows for electrons through the load and OH⁻ through the electrolyte from cathode to anode. Anode: \(\text{H}_2 + 2\text{OH}^- \rightarrow 2\text{H}_2\text{O} + 2e^-\). Cathode: \(\tfrac{1}{2}\text{O}_2 + \text{H}_2\text{O} + 2e^- \rightarrow 2\text{OH}^-\). Overall: \(\text{H}_2 + \tfrac{1}{2}\text{O}_2 \rightarrow \text{H}_2\text{O}\). Operating temperature about 60 to 90 °C, efficiency up to about 60 percent, cheap catalysts (Ni, Ag) possible. Drawback: CO2 forms carbonate with KOH, so pure H2 and O2 are required. Application: spacecraft power and water.

Q4. Explain the PEM fuel cell with a neat diagram. (5 marks)

Diagram layers from left: bipolar plate with H2 channels, anode gas diffusion layer, anode Pt/C catalyst, Nafion membrane, cathode Pt/C catalyst, cathode gas diffusion layer, bipolar plate with air channels; external load; H⁺ arrows through the membrane to the cathode; water leaving from the cathode side. Anode: \(\text{H}_2 \rightarrow 2\text{H}^+ + 2e^-\). Cathode: \(\tfrac{1}{2}\text{O}_2 + 2\text{H}^+ + 2e^- \rightarrow \text{H}_2\text{O}\). Temperature 60 to 80 °C; the membrane must be kept humid to conduct protons. Advantages: compact, high power density, fast start, no liquid electrolyte. Limitations: costly Pt, CO poisoning, water management. Uses: cars, buses, portable and backup power.

Q5. Explain the molten carbonate fuel cell. (5 marks)

Electrolyte: molten Li2CO3/K2CO3 in a LiAlO2 matrix; anode: porous Ni alloy; cathode: lithiated NiO; temperature about 650 °C. Anode: \(\text{H}_2 + \text{CO}_3^{2-} \rightarrow \text{H}_2\text{O} + \text{CO}_2 + 2e^-\). Cathode: \(\tfrac{1}{2}\text{O}_2 + \text{CO}_2 + 2e^- \rightarrow \text{CO}_3^{2-}\). Carbonate ions travel from cathode to anode; CO2 from the anode exhaust is sent back to the cathode. High temperature allows nickel catalysts and internal reforming of natural gas; CO acts as fuel. Efficiency about 45 to 50 percent electrical, higher with heat recovery. Drawbacks: corrosion by molten salt, slow start-up, limited life. Use: large stationary power plants.

Q6. Explain the solid oxide fuel cell. (5 marks)

Electrolyte: dense yttria-stabilised zirconia that conducts O²⁻ at 600 to 1000 °C; anode: Ni-YSZ cermet; cathode: LSM perovskite; planar or tubular geometry. Cathode: \(\tfrac{1}{2}\text{O}_2 + 2e^- \rightarrow \text{O}^{2-}\). Anode: \(\text{H}_2 + \text{O}^{2-} \rightarrow \text{H}_2\text{O} + 2e^-\); with CO, \(\text{CO} + \text{O}^{2-} \rightarrow \text{CO}_2 + 2e^-\). Oxide ions move from cathode to anode; water forms at the anode. Advantages: all solid, no precious metals, fuel flexibility, internal reforming, high efficiency, useful high-temperature heat. Disadvantages: long start-up, thermal cycling stresses, sealing and material costs. Uses: stationary power, CHP, auxiliary power units.

Q7. Why can fuel cells have higher efficiency than heat engines? What limits their practical voltage? (3 marks)

A heat engine converts chemical energy to heat and then to work, so it is limited by the Carnot efficiency. A fuel cell converts the free energy directly to electrical work; its limit is ΔG/ΔH, about 83 percent for hydrogen. Practical voltage is below 1.23 V because of activation losses at the electrodes, ohmic losses in the electrolyte and contacts, and concentration losses at high current, besides fuel crossover.

Q8. List applications, advantages and disadvantages of fuel cells. (3 marks)

Applications: fuel cell cars, buses, trucks and forklifts; backup power for hospitals, telecom towers and data centres; stationary CHP plants; spacecraft; submarines; portable chargers. Advantages: high efficiency, clean exhaust, quiet, modular, quick refuelling. Disadvantages: high cost, hydrogen storage and infrastructure, catalyst poisoning, limited durability, slow start for high temperature cells.

Exam tips

  • For each type, learn a five-point card: electrolyte, ion, temperature, electrodes/catalyst, reactions; draw arrows for electrons and ions in opposite paths.
  • Check that anode and cathode reactions add up to H2 + ½O2 → H2O; this catches most errors.
  • Remember where water forms: cathode for H⁺ conductors, anode for OH⁻, CO₃²⁻ and O²⁻ conductors.
  • A classification table earns full marks quickly; include temperature and applications columns.
  • Use F = 96485 C/mol and n = 2 for hydrogen numericals.

FAQs

Is a hydrogen fuel cell completely pollution free?

The cell itself emits only water and heat. Overall emissions depend on how the hydrogen is produced: hydrogen from natural gas releases CO2, while hydrogen from water electrolysis using renewable electricity is nearly emission free.

Why does a PEM fuel cell need platinum?

At 60 to 80 °C the hydrogen oxidation and especially oxygen reduction reactions are very slow. Platinum catalyses them well, though research aims to reduce or replace it.

Why do MCFC and SOFC not need precious metal catalysts?

At 600 °C and above, reactions are fast enough on nickel and ceramic electrodes, so expensive catalysts are unnecessary.

Can a fuel cell run on fuels other than hydrogen?

Yes. DMFCs use methanol directly, and MCFCs and SOFCs can reform natural gas, biogas or other hydrocarbons inside the cell.

These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Physics for Emerging Fields, Semester II) and were prepared with AI help and checked.

More in Physics for Emerging Fields

See all →