Nanocomputing Notes FE Sem 2 Physics for Emerging Fields | MU
On this page
For fifty years computers became faster and cheaper because transistors kept shrinking, as predicted by Moore's law. Today the smallest transistor features are only a few nanometres, close to the size of a few dozen atoms, and ordinary silicon scaling is running into limits of leakage, heat and cost. Nanocomputing looks for new ways to compute at the molecular scale: with carbon nanotubes, nanowires, single molecules and even DNA, assembled partly by chemistry instead of lithography. This module of Physics for Emerging Fields introduces the nanocomputer, its building blocks, DNA, carbon nanotubes and nanowires, and Chemically Assembled Electronic Nanotechnology (CAEN), and shows how artificial intelligence is being combined with nanotechnology. It maps to course outcome CO6 (explain AI integration in various nanotechnology applications) and carries the largest weight of the six modules (6 hours).
Summary
Nanocomputer introduction: A nanocomputer is a computer whose basic switching devices, memory elements and interconnects have dimensions in the nanometre range (roughly 1 to 100 nm), or which is built from molecules and nanostructures. In a broad sense today's processors, with transistors whose critical features are tens of nanometres or less, are already nanoscale; in the narrower sense used in this module, nanocomputing means computers based on new nanodevices such as molecular switches, carbon nanotube and nanowire transistors, single-electron devices, quantum-dot cells or DNA molecules. Motivation: Moore's observation (1965, revised 1975) that the number of transistors on a chip doubles about every two years has driven computing, but as transistors shrink to a few nanometres, gate oxide and channel become so thin that electrons tunnel through them (leakage), heat density becomes very large, variations between devices increase because individual dopant atoms matter, and lithography and fabs become enormously expensive. Nanocomputing aims at higher device density, lower energy per operation, higher speed and cheaper fabrication by self-assembly. Types of nanocomputers include electronic (molecular electronics, CNT and nanowire circuits, single-electron devices), mechanical (nanoscale rods and gears, mostly theoretical), chemical and biochemical (DNA computing), and quantum computers (which use quantum bits rather than nanoscale size alone).
Nanocomputer building blocks: Any computer needs (i) switches or logic devices that can be turned on and off and that restore signal levels (gain); (ii) memory elements that store a bit in two stable states; (iii) interconnects that carry signals between devices; and (iv) an architecture that organises them and tolerates defects. At the nanoscale, candidate building blocks are: molecular switches and diodes (single organic molecules or monolayers whose conductance changes between two states, such as rotaxanes and catenanes); carbon nanotube field-effect transistors (CNTFETs); semiconductor nanowire transistors and gate-all-around structures; single-electron transistors that switch by moving one electron at a time; quantum-dot cellular automata, where the position of electrons in a cell of four dots encodes 0 or 1 and logic works by Coulomb interaction without current flow; spintronic devices that use electron spin; and resistive switches (memristors) for memory and in-memory computing. The most studied architecture is the crossbar: two layers of parallel nanowires crossing at right angles with a switching molecule or film at each crossing. Each crosspoint acts as a programmable diode, resistor or memory bit, so N horizontal and N vertical wires give N² devices, a very dense and regular structure that is easy to make chemically.
DNA computing: DNA (deoxyribonucleic acid) is a long polymer of four nucleotide bases, adenine (A), thymine (T), guanine (G) and cytosine (C), along a sugar-phosphate backbone. Two strands bind (hybridise) into a double helix only when their bases are complementary, A with T and G with C (Watson-Crick pairing). DNA computing uses this predictable binding to perform computation: information is encoded in sequences of bases, and laboratory operations act as instructions. In 1994 Leonard Adleman solved a seven-city Hamiltonian path problem (finding a route through a directed graph that visits each vertex exactly once) with DNA. Each city was represented by a 20-base strand and each road by a strand whose halves were complementary to the end of one city and the start of the next. Mixing them in a test tube let trillions of strands bind and be joined by the enzyme ligase, forming all possible paths in parallel. Then the polymerase chain reaction (PCR) amplified paths with the correct start and end, gel electrophoresis selected those of the correct length, and affinity separation with probes kept those containing every city, leaving the answer. Strengths: massive parallelism (about \(10^{18}\) strands can react at once), huge information density (about 1 bit per cubic nanometre) and very low energy per operation. Weaknesses: slow (hours or days for each step), error-prone binding, the need for human handling, and the fact that the amount of DNA needed grows exponentially for hard problems. Today DNA is used more for nanofabrication than for general computing: DNA origami (folding a long strand with short staple strands into designed shapes, shown by Paul Rothemund in 2006) and DNA tiles can place carbon nanotubes, nanoparticles and molecules at precise positions, acting as a scaffold for nanoelectronic circuits. DNA data storage and molecular logic gates for medical diagnosis are active research areas.
Carbon nanotubes: A carbon nanotube (CNT) is a cylinder made by rolling a sheet of graphene (a single layer of carbon atoms in a hexagonal honeycomb). It was brought to wide attention by Sumio Iijima in 1991. Single-walled CNTs (SWCNTs) have diameters of about 0.4 to 3 nm (typically around 1 nm) and lengths up to millimetres or more; multi-walled CNTs (MWCNTs) consist of several concentric tubes. The way the sheet is rolled, given by the chiral indices (n, m), decides whether the tube is metallic or semiconducting: if \(n - m\) is a multiple of 3 the tube is metallic (armchair tubes with n = m are always metallic), otherwise it is semiconducting, with a band gap roughly inversely proportional to the diameter (about 0.8 eV for a 1 nm tube). Properties useful for computing: near-ballistic transport over long distances (electrons travel without scattering), very high electron mobility, current-carrying capacity of about \(10^9\) A/cm², about a thousand times that of copper, high thermal conductivity, mechanical strength, and nanometre diameter. Uses: semiconducting CNTs as channels of CNTFETs, which can switch at lower voltage and energy than silicon transistors; metallic CNTs as interconnects and vias; CNT memories (NRAM, based on mechanical switching of CNT fabrics); and sensors. Milestones include a CNT computer built at Stanford in 2013 from 178 CNT transistors and a 16-bit RISC-V microprocessor made at MIT in 2019 from more than 14,000 CNT transistors. Challenges: growing only semiconducting tubes (removing metallic ones), aligning and placing tubes precisely, and making good, low-resistance contacts.
Nanowires: A nanowire is a solid wire-like structure with a diameter of a few nanometres to about 100 nm and a length much greater (aspect ratio over 100). They can be made of semiconductors (Si, Ge, GaN, InP, ZnO), metals (Ag, Au, Cu) or oxides. They are grown bottom-up, for example by the vapour-liquid-solid (VLS) method, in which a liquid gold droplet absorbs silicon from a gas such as silane until supersaturated, and silicon crystallises beneath it as a wire whose diameter is set by the droplet; or made top-down by lithography and etching. Doping can be changed along the length or around the core (core-shell wires), making p-n junctions, LEDs and transistors inside a single wire. In nanocomputing, semiconductor nanowires serve as channels for nanowire FETs and gate-all-around transistors (the gate wraps fully around the channel for best control), crossed p-type and n-type nanowires form diodes and logic gates at their junctions, and dense parallel arrays form the two layers of crossbar memories and logic. Metallic nanowires act as interconnects. Quantum confinement makes very thin wires behave differently from bulk, changing band gap and conductance.
Chemically Assembled Electronic Nanotechnology (CAEN): CAEN is an approach to building computers in which the electronic components and their connections are formed by chemical self-assembly instead of by lithographic patterning. It was proposed around 2001 by researchers at Carnegie Mellon University (S. C. Goldstein and colleagues), building on molecular electronics and crossbar work at HP Labs and UCLA. Idea: nanowires or nanotubes are made in bulk, aligned into parallel layers (for example by fluidic flow or Langmuir-Blodgett methods), and two layers are laid across each other; molecular switches (such as rotaxane molecules) self-assemble at the crossings. Each crosspoint becomes a configurable device, typically a two-terminal switch or diode whose state can be set by applying a voltage, so it can be programmed to be connected or not. Large regular fabrics of such crossbars, called nanoBlocks grouped into clusters (a nanoFabric), are made cheaply. Because chemical assembly cannot place each component exactly and produces many defects, the circuit is designed only after fabrication: the fabric is tested, its defects are mapped, and then the desired logic is configured around the defective parts, as in a field-programmable gate array (FPGA). This idea was shown to work in HP's Teramac computer (1998), which ran correctly even though about 3 percent of its resources were defective. Advantages of CAEN: very high density (devices spaced a few nanometres apart), low fabrication cost since expensive lithography is avoided, low power, and reconfigurability. Limitations: only regular structures can be made; two-terminal molecular devices do not provide gain, so separate restoring logic (for example CMOS or nanowire transistors) is needed; high defect rates require testing and reconfiguration; and connecting the nanoscale fabric to the microscale world is difficult. CAEN-based nanoFabrics are therefore seen as reconfigurable computing fabrics that work alongside conventional CMOS.
AI integration in nanotechnology and nanocomputing: This topic comes from course outcome CO6 (explain AI integration in nanotechnology applications) rather than from the module content list. Artificial intelligence and nanotechnology now support each other in both directions. AI for nanotechnology: machine learning models predict properties of new nanomaterials and molecules, speed up the search for good switching molecules, catalysts or CNT growth conditions, analyse microscope images (SEM, TEM, AFM) to count and classify nanostructures, detect defects in chips and nanofabrics and help map defects for reconfiguration, and optimise device design and lithography (for example correcting mask patterns). Nanotechnology for AI: AI needs huge amounts of matrix multiplication, and nanoscale devices enable new hardware for it. Memristor and resistive-switching crossbars perform multiply-and-add operations directly in memory using Ohm's law and Kirchhoff's current law (in-memory or analog computing), which saves the energy of moving data; spintronic and phase-change devices act as artificial synapses in neuromorphic (brain-inspired) chips; CNT-based circuits promise energy-efficient AI accelerators; and nanosensors combined with on-chip AI give smart sensors for health and environment monitoring. Other applications include AI-guided nanomedicine (designing nanoparticles for targeted drug delivery) and DNA-based molecular neural networks that classify patterns in a test tube.
Mind map
Nanocomputing
- Introduction
- Moore's law, scaling limits
- Leakage, heat, cost
- Electronic, mechanical, DNA, quantum
- Building blocks
- Switches with gain
- Memory, interconnects
- Molecular switches, CNTFET, SET, QCA
- Crossbar: N² crosspoints
- DNA
- A-T, G-C pairing
- Adleman 1994, Hamiltonian path
- Massive parallelism
- DNA origami scaffolds
- Carbon nanotubes
- Rolled graphene, SWCNT, MWCNT
- Metallic if n − m divisible by 3
- Ballistic, 10⁹ A/cm²
- CNTFET, interconnects
- Nanowires
- VLS growth
- Nanowire FET, gate-all-around
- Crossed p-n junctions
- CAEN
- Self-assembly, not lithography
- Molecular switches at crosspoints
- nanoFabric, test and reconfigure
- Defect tolerance (Teramac)
- AI integration
- ML for materials and defects
- Memristor crossbars, neuromorphic chips
How a CAEN nanoFabric is made and used
- Synthesise nanowires or carbon nanotubes in bulk by chemical methods (for example VLS growth).
- Align them into a layer of parallel wires using fluid flow or Langmuir-Blodgett assembly.
- Deposit a monolayer of switching molecules (for example rotaxanes) over the wires.
- Lay a second layer of parallel wires at right angles, forming a crossbar; each crossing traps molecules and becomes a two-terminal device.
- Connect blocks of crossbars (nanoBlocks) into a large regular fabric with a micro-scale interface to CMOS.
- Test the fabric to locate broken wires and faulty junctions, and store a defect map.
- Configure the desired circuit by applying voltages that set chosen junctions on or off, avoiding defective ones.
- The configured fabric then runs logic or stores data; it can be reconfigured later for a different task.
Important definitions
| Term | Meaning |
|---|---|
| Nanocomputer | A computer whose logic, memory and interconnect elements are nanoscale devices (about 1 to 100 nm) or molecules. |
| Moore's law | The observation that the number of transistors on an integrated circuit doubles roughly every two years. |
| Molecular electronics | Use of single molecules or molecular layers as electronic components such as switches, diodes and wires. |
| Crossbar architecture | Two layers of parallel nanowires crossing at right angles with a programmable device at each crossing. |
| DNA computing | Computing that encodes data in DNA base sequences and processes it by hybridisation and enzymatic operations. |
| Hybridisation | Binding of two complementary DNA strands into a double helix. |
| DNA origami | Folding a long DNA strand into a designed 2D or 3D shape using many short staple strands. |
| Carbon nanotube | A seamless cylinder of rolled graphene with nanometre diameter; single-walled or multi-walled. |
| Chirality (n, m) | Indices describing how graphene is rolled into a nanotube; they decide diameter and metallic or semiconducting nature. |
| Nanowire | A solid wire with diameter of a few to about 100 nm and length much larger than its diameter. |
| CAEN | Chemically Assembled Electronic Nanotechnology: building circuits by chemical self-assembly of nanowires and molecular switches, then configuring them. |
| Self-assembly | Spontaneous organisation of molecules or nanostructures into ordered patterns driven by chemical interactions. |
| Defect tolerance | Ability of a system to work correctly despite faulty components, by testing and configuring around them. |
| Neuromorphic computing | Brain-inspired hardware in which devices act like neurons and synapses, often using nanoscale memristors. |
Formulas
| Formula | Meaning |
|---|---|
| \( N(t) = N_0\,2^{(t - t_0)/2} \) | Moore's law with doubling every 2 years (t in years). |
| \( \text{Crosspoints} = N_xN_y \) | Devices in a crossbar of Nx by Ny wires; N² for a square crossbar. |
| \( \text{Density} = \dfrac{1}{p^2} \) | Crosspoints per unit area for wire pitch p. |
| \( 4^L \) | Number of distinct DNA sequences of length L bases. |
| \( d = \dfrac{a\sqrt{n^2 + nm + m^2}}{\pi},\ a = 0.246\ \text{nm} \) | Diameter of a carbon nanotube with chiral indices (n, m). |
| \( (n - m) \bmod 3 = 0 \Rightarrow \text{metallic} \) | Rule for metallic CNTs; otherwise semiconducting. |
| \( E_{switch} \approx CV^2 \) | Energy drawn from the supply to charge and discharge a node of capacitance C at voltage V. |
| \( E_{min} = kT\ln2 \) | Landauer limit: minimum energy to erase one bit at temperature T. |
| \( I_j = \sum_i G_{ij}V_i \) | Column current of a memristor crossbar: a matrix-vector multiplication done by Ohm's and Kirchhoff's laws. |
Key points to remember
- Silicon scaling faces tunnelling leakage, heat, variability and cost; nanocomputing seeks alternatives.
- A useful logic device needs on/off switching and gain; two-terminal molecular switches lack gain.
- Crossbars are the natural architecture for chemically assembled devices: simple, regular, dense.
- DNA computing exploits A-T, G-C pairing and massive parallelism; Adleman solved a 7-city Hamiltonian path in 1994.
- DNA computing is slow and error-prone but DNA origami is valuable for placing nanocomponents.
- CNTs: armchair always metallic; (n − m) divisible by 3 metallic; others semiconducting.
- CNTs carry about 10⁹ A/cm² and show near-ballistic transport.
- Nanowires are grown by VLS; they form FETs, crossed p-n junctions and crossbar layers.
- CAEN = self-assembly + molecular switches at crossings + post-fabrication test and configuration.
- Teramac showed that a defect-tolerant reconfigurable computer can work with many faulty parts.
- AI helps design and inspect nanomaterials; nanodevices (memristors, spintronics) build energy-efficient AI hardware.
Solved examples
Example 1. A chip of 1971 had 2300 transistors. Using Moore's law with doubling every 2 years, estimate the count in 2021.
Number of doublings \(= (2021 - 1971)/2 = 25\). \(N = 2300\times2^{25} = 2300\times33{,}554{,}432 = 7.72\times10^{10}\), about 77 billion, which is the right order of magnitude for the largest chips of that time.
Example 2. A square crossbar memory uses nanowires at a pitch of 10 nm. Find the number of crosspoints on a 1 μm × 1 μm area and the bit density per cm².
Wires each way \(= 1\ \mu\text{m}/10\ \text{nm} = 100\). Crosspoints \(= 100\times100 = 10^{4}\) bits per μm². Per cm: \(1\ \text{cm}/10\ \text{nm} = 10^{6}\) wires, so density \(= (10^{6})^2 = 10^{12}\) bits per cm², a terabit per square centimetre.
Example 3. How many different 20-base DNA strands are possible? Why did Adleman use 20-base strands?
\(4^{20} = 1.10\times10^{12}\). With over a trillion possible sequences, randomly chosen 20-base codes for the cities are very unlikely to resemble each other, so each city and road can be given a unique, specific binding sequence.
Example 4. Find the diameters of (10, 10), (10, 0) and (9, 0) carbon nanotubes and state whether each is metallic or semiconducting.
(10, 10): \(d = 0.246\sqrt{100 + 100 + 100}/\pi = 0.246\times17.32/3.1416 = 1.36\) nm; n − m = 0, metallic (armchair). (10, 0): \(d = 0.246\times10/\pi = 0.783\) nm; n − m = 10, not divisible by 3, semiconducting. (9, 0): \(d = 0.246\times9/\pi = 0.705\) nm; n − m = 9, divisible by 3, metallic (in simple theory; curvature opens a very small gap).
Example 5. A CMOS gate node has capacitance 0.1 fF and supply 0.8 V. Compare the switching energy with the Landauer limit at 300 K.
\(E \approx CV^2 = 0.1\times10^{-15}\times0.64 = 6.4\times10^{-17}\) J. Landauer limit \(= kT\ln2 = 1.38\times10^{-23}\times300\times0.693 = 2.87\times10^{-21}\) J. Ratio \(\approx 2.2\times10^{4}\): today's logic uses about twenty thousand times the theoretical minimum, so there is a large room for more efficient nanodevices.
Important questions and answers
Q1. What is a nanocomputer? Why is nanocomputing needed? (5 marks)
A nanocomputer is a computer built from nanoscale components (about 1 to 100 nm) such as molecular switches, CNT or nanowire transistors, single-electron devices, quantum-dot cells or DNA molecules. Need: (i) Moore's law scaling of silicon is reaching physical limits: gate oxides and channels only a few atoms thick allow tunnelling leakage; (ii) power density and heat removal limit clock speeds; (iii) random dopant fluctuation and line-edge roughness make devices vary; (iv) lithography and fabrication plants are extremely costly. Nanocomputing promises much higher device density, lower energy per operation, possibly cheap fabrication by self-assembly, and new computing styles (massively parallel DNA computing, neuromorphic and in-memory computing). Classification: electronic, mechanical, chemical/biochemical (DNA) and quantum nanocomputers.
Q2. Explain the building blocks of a nanocomputer. (5 marks)
(i) Logic switches: devices with two distinct states and gain, such as CNTFETs, nanowire FETs, single-electron transistors, molecular switches (rotaxanes), quantum-dot cellular automata cells and spintronic switches. (ii) Memory: crossbar junctions, memristors, molecular memories, CNT NRAM. (iii) Interconnects: metallic nanowires and CNTs carrying high current density. (iv) Architecture: regular crossbar arrays in which N + N wires address N² devices, with defect-tolerant, reconfigurable design and a CMOS interface for input, output and gain. (v) Fabrication: bottom-up self-assembly (chemical, DNA-directed) combined with top-down lithography. Sketch a crossbar with junction devices.
Q3. Explain DNA computing with Adleman's experiment. (5 marks)
DNA consists of bases A, T, G, C; complementary strands bind by A-T and G-C pairing. In DNA computing data are encoded as base sequences and operations are laboratory steps. Adleman (1994) solved a Hamiltonian path problem on a 7-vertex directed graph: (1) each vertex coded by a random 20-mer; each edge by a 20-mer made of the second half of its start vertex and the first half of its end vertex (complemented appropriately); (2) mixing vertex complements and edges with ligase formed strands for all possible paths in parallel; (3) PCR amplified only paths from the given start to the end vertex; (4) gel electrophoresis kept only strands of length 7 × 20 = 140 bases; (5) affinity purification with each vertex's probe kept only paths containing all vertices; (6) the remaining DNA was detected and sequenced to read the path. Advantages: enormous parallelism, very high storage density, low energy. Limitations: slow, error-prone, labour intensive, exponential DNA volume for large problems.
Q4. Discuss carbon nanotubes and nanowires as building blocks of nanocomputers. (5 marks)
Carbon nanotubes: rolled graphene cylinders, SWCNT about 1 nm diameter, MWCNT several shells; chirality (n, m) decides metallic or semiconducting behaviour; near-ballistic conduction, high mobility, current capacity about 10⁹ A/cm², high thermal conductivity. Semiconducting CNTs form channels of CNTFETs with low switching energy; metallic CNTs form interconnects; demonstrated CNT computers (Stanford 2013, MIT 2019 RISC-V processor). Challenges: chirality control, purification, alignment and contacts. Nanowires: Si, Ge, III-V or metal wires of 5 to 100 nm diameter, grown by VLS or made by etching; doping can be controlled along and across the wire; uses: nanowire and gate-all-around FETs, crossed p-n diodes and logic gates, crossbar memories and logic, interconnects and sensors. Both allow bottom-up assembly into dense arrays.
Q5. What is CAEN? Explain its principle, advantages and limitations. (6 marks)
Chemically Assembled Electronic Nanotechnology builds electronic circuits by chemical self-assembly of nanoscale components instead of lithography. Principle: aligned layers of nanowires or CNTs are crossed to form crossbars, and molecular switches at each crossing act as programmable two-terminal devices (diodes or switches). Blocks of crossbars (nanoBlocks) are arranged in a regular nanoFabric. Since self-assembly is imprecise and defects are many, the fabric is tested after manufacture, defects are mapped, and the required circuit is configured around them by setting junction states with voltages, much like programming an FPGA; HP's Teramac demonstrated this defect-tolerant approach. Advantages: extremely high density, low manufacturing cost, low power, reconfigurability, tolerance of defects. Limitations: only regular periodic structures; two-terminal molecules give no gain, so signal restoration needs other devices; high defect rates need large test and configuration effort; interfacing nanoscale wires to microscale circuits is hard; long-term stability of molecular switches is uncertain.
Q6. Explain the role of AI in nanotechnology applications. (5 marks)
AI for nanotechnology: machine learning predicts properties and suggests compositions of nanomaterials and molecules, reducing trial-and-error experiments; computer vision analyses electron and probe microscope images; AI detects and maps defects in nanofabrics and chips; optimisation algorithms tune growth and lithography processes. Nanotechnology for AI: memristor crossbars compute matrix-vector products in memory (\(I_j = \sum G_{ij}V_i\)), cutting energy spent moving data; nanoscale phase-change, spintronic and ferroelectric devices act as artificial synapses in neuromorphic chips; CNT transistors promise energy-efficient AI accelerators; smart nanosensors with on-chip AI enable health and environment monitoring. Combined applications: AI-designed nanoparticles for targeted drug delivery, intelligent lab-on-chip diagnostics, and DNA-based molecular neural networks.
Q7. Why must nanoscale architectures be defect tolerant? (3 marks)
At the nanoscale, chemical self-assembly cannot place every wire and molecule exactly, and single missing atoms or molecules can break a device, so a large fraction of components will be faulty. Discarding every chip with a defect would make yields almost zero. Defect-tolerant architectures use regular, redundant, reconfigurable structures: after fabrication the circuit is tested, defects are mapped and the logic is configured using only working parts.
Exam tips
- Start every answer with a crisp definition and then list points with headings; this module is descriptive.
- Draw a crossbar diagram for building blocks and CAEN questions; label nanowires, molecular switches and crosspoints.
- For DNA computing, write Adleman's steps in order: encode, hybridise and ligate, PCR, gel, affinity, read.
- For CNTs remember the (n, m) rule and the diameter formula; one quick calculation earns extra marks.
- Include one or two AI-integration points in any application answer, since CO6 asks for it.
FAQs
Is a quantum computer the same as a nanocomputer?
No. A quantum computer uses quantum superposition and entanglement of qubits. Its devices may be nanoscale, but a nanocomputer in general may still use ordinary classical bits.
Will DNA computers replace laptops?
Unlikely. DNA reactions take hours and need laboratory handling. DNA is more promising for data storage, molecular diagnostics and as a scaffold for building nanoelectronics.
Why are carbon nanotubes not yet in everyday chips?
Making large numbers of purely semiconducting, well-aligned tubes with good contacts at low cost is still difficult, although prototype processors have been demonstrated.
Why do CAEN circuits need to be configured after manufacturing?
Chemical assembly cannot guarantee the exact position or quality of each device, so the circuit is defined later by testing the fabric and programming the working junctions.
These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Physics for Emerging Fields, Semester II) and were prepared with AI help and checked.
More in Physics for Emerging Fields
See all →- Solar Energy Notes FE Sem 2 Physics for Emerging Fields | MU MU FE Sem 2 Physics for Emerging Fields Module 1: photovoltaic effect, solar cell working, types, series and parallel connections, applicati...
- Optical Imaging Notes FE Sem 2 Physics for Emerging Fields | MU MU FE Sem 2 Physics for Emerging Fields Module 2: CCD and CMOS sensors, monochrome and colour imaging, chromaticity diagram, colour matching...
- MEMS Notes FE Sem 2 Physics for Emerging Fields | MU MU FE Sem 2 Physics for Emerging Fields Module 3: MEMS overview, intrinsic characteristics, microsensors, microactuators, materials, packagi...
- Fuel Cell Notes FE Sem 2 Physics for Emerging Fields | MU MU FE Sem 2 Physics for Emerging Fields Module 4: fuel cell basics, classification, alkaline, molten carbonate, PEM and solid oxide fuel cel...
- Energy Harvesting Notes FE Sem 2 Physics for Emerging Fields | MU MU FE Sem 2 Physics for Emerging Fields Module 5: piezoelectric effect, materials and models, piezo generator, harvesting applications, huma...