Engineering
- How does Norton's theorem represent a network as a current source with parallel resistance? In one line Norton's theorem says any linear two-terminal network can be replaced by a current source I_N in parallel with a resistance R_N,... 1
- What is the maximum power transfer theorem and what load resistance gives maximum power? In one line A source delivers maximum power to a load when the load resistance equals the Thevenin resistance of the source network, R_L = R... 1
- How is a sinusoidal alternating voltage generated by a coil rotating in a magnetic field? In one line When a coil rotates at constant speed in a uniform magnetic field, the flux linking it changes continuously, so by Faraday's law... 1
- What do cycle, time period, frequency, amplitude and instantaneous value mean for an AC wave? In one line These are the basic terms that describe a repeating AC waveform: how big it gets (amplitude), how long one repetition takes (tim... 1
- What is the RMS value of an alternating current and why is it 0.707 times the peak? In one line The RMS (root mean square) value of an alternating current is the steady DC current that would produce the same heat in a resist... 1
- What is the average value of a sine wave, and how are form factor and peak factor defined? In one line The average value of a sine wave over a half cycle is 2V_m/π ≈ 0.637V_m; form factor is RMS ÷ average (1.11) and peak factor is... 1
- What is a phasor, and how do you find phase difference between two AC quantities? In one line A phasor is a rotating line whose length represents the RMS (or peak) value of a sinusoid and whose angle represents its phase,... 1
- How do you add or subtract sinusoidal AC quantities using phasors and complex numbers? In one line To add or subtract sinusoids of the same frequency, write each as a phasor in rectangular form (a + jb), add or subtract the rea... 1
- How do current and voltage behave in purely resistive, inductive and capacitive AC circuits? In one line In a pure resistor the current is in phase with the voltage, in a pure inductor the current lags the voltage by 90°, and in a pu... 1
- How do you analyse a series RL circuit: impedance, phase angle and power factor? In one line In a series RL circuit the impedance is Z = √(R² + X_L²), the current lags the voltage by φ = tan⁻¹(X_L/R), and the power factor... 1
- How do you analyse a series RC circuit and why does its current lead the voltage? In one line In a series RC circuit the impedance is Z = √(R² + X_C²) and the current leads the supply voltage by φ = tan⁻¹(X_C/R), giving a... 1
- How do you analyse a series RLC circuit and decide if it is inductive or capacitive? In one line In a series RLC circuit Z = √(R² + (X_L - X_C)²). If X_L gt X_C the circuit is inductive (current lags), if X_C gt X_L it is cap... 1
- What is admittance, and how is it used to solve parallel AC circuits? In one line Admittance Y = 1/Z measures how easily a branch lets alternating current flow. For branches in parallel the admittances simply a... 1
- What are real power, reactive power, apparent power and power factor in an AC circuit? In one line Real power P = VIcosφ (W) does useful work, reactive power Q = VIsinφ (VAR) flows back and forth to build magnetic and electric... 1
- What is series resonance in an RLC circuit and what is its resonant frequency? In one line Series resonance happens at the frequency where X_L = X_C: the impedance becomes purely resistive and minimum ( Z = R ), and the... 1
- What is parallel resonance, and how does it differ from series resonance? In one line Parallel resonance occurs in a coil-capacitor parallel (tank) circuit when the reactive currents of the two branches cancel, mak... 1
- How are three-phase voltages generated and why are they displaced by 120 degrees? In one line Three identical coils placed 120° apart on the same rotor (or stator) of an alternator produce three equal sinusoidal EMFs that... 1
- What are line and phase voltage and current relations in a balanced star connection? In one line In a balanced star (Y) connection, line voltage is √(3) times phase voltage and leads it by 30°, while line current equals phase... 1
- What are line and phase voltage and current relations in a balanced delta connection? In one line In a balanced delta (Δ) connection, line voltage equals phase voltage, while line current is sqrt3 times phase current and lags... 1
- What is the working principle of a single-phase transformer and why does it not work on DC? In one line A transformer works on mutual induction: an alternating current in the primary winding sets up an alternating flux in the iron c... 1
- What are core-type and shell-type transformers and how do their constructions differ? In one line Core-type and shell-type transformers differ in how the windings and iron core are arranged: in core type the windings surround... 1
- How are polymers classified by origin, structure, polymerisation type and composition? In one line Polymers are classified in several ways: by source (natural, semi-synthetic, synthetic), by chain structure (linear, branched, c... 1
- What is the difference between thermoplastic and thermosetting polymers? In one line Thermoplastics soften on heating and harden on cooling repeatedly because their linear chains are held by weak forces, while the... 1
- What are number average and weight average molecular weights of a polymer and what is polydispersity? In one line Because a polymer sample contains chains of many different lengths, its molecular weight is expressed as an average: the number... 1