Engineering
- How does Boys' gas calorimeter measure the calorific value of a gaseous fuel? In one line A known volume of gas is burnt at a steady rate, and its heat is absorbed by water flowing through cooling tubes; from the water... 1
- How do you calculate the calorific value of coal using Dulong's formula? In one line Dulong's formula estimates the higher calorific value of a fuel from its percentages of carbon, hydrogen, oxygen and sulphur (fr... 1
- What is proximate analysis of coal and why do moisture, volatile matter, ash and fixed carbon matter? In one line Proximate analysis finds the percentages of moisture, volatile matter, ash and fixed carbon in coal by simple weighing and heati... 1
- What is ultimate analysis of coal and how are carbon, hydrogen, nitrogen, sulphur and oxygen found? In one line Ultimate analysis determines the elemental composition of coal (C, H, N, S, ash and O by difference) and is used for calorific v... 1
- How do you calculate the minimum weight of oxygen and air needed to burn 1 kg of coal? In one line Using balanced combustion equations, find the oxygen needed by C, H and S, subtract the oxygen already present in the fuel, and... 1
- How do you find the volume of air at STP needed to burn coal, including excess air? In one line Convert the minimum mass of oxygen into moles, multiply by 22.4 to get its volume at STP, then divide by 0.21 because air contai... 1
- What is corrosion and why is it called the reverse of metal extraction? In one line Corrosion is the gradual destruction or deterioration of a metal by chemical or electrochemical reaction with its environment, s... 1
- How does dry or atmospheric corrosion occur, and what decides whether the oxide film protects the metal? In one line Dry corrosion is direct chemical attack of a metal by dry gases (mainly oxygen) forming a surface film, and the nature of this f... 1
- What is the hydrogen evolution mechanism of wet corrosion in an acidic medium? In one line In an acidic, oxygen-poor environment, the metal dissolves at anodic areas and the released electrons reduce H⁺ ions to hydrogen... 1
- How does iron rust in neutral water by the oxygen absorption mechanism? In one line In a neutral or slightly alkaline medium containing dissolved oxygen, iron is oxidised at anodic areas while oxygen is reduced t... 1
- How do the galvanic series position, metal purity and nature of corrosion product affect corrosion rate? In one line Corrosion is faster when the metal is more active (higher in the galvanic series) or coupled with a very different metal, when i... 1
- How do temperature, pH, concentration and moisture of the medium change the rate of corrosion? In one line Corrosion generally speeds up with higher temperature, lower pH (more acidic), higher concentration of corrosive ions and higher... 1
- Why does a small anode with a large cathode corrode so fast, and how does overvoltage affect corrosion? In one line Corrosion is intense when the anodic area is small compared with the cathodic area, and it is slower when the hydrogen overvolta... 1
- How do selection of metal and proper design help prevent corrosion in engineering structures? In one line Choosing the right (noble or corrosion-resistant) metal for the environment and designing parts so that moisture, crevices and d... 1
- What is cathodic protection, and how do sacrificial anode and impressed current methods work? In one line Cathodic protection prevents corrosion by forcing the whole metal structure to act as the cathode, using either a more active sa... 1
- How do anodic and cathodic corrosion inhibitors slow down corrosion? In one line Corrosion inhibitors are substances added in small amounts to the corrosive medium that reduce the rate of corrosion by blocking... 1
- What is the difference between galvanising and tinning as anodic and cathodic metallic coatings? In one line Galvanising coats iron with a more active metal (zinc), giving an anodic coating that protects even when scratched, while tinnin... 1
- Why do electronic devices and circuit boards corrode, and how is it prevented? In one line Electronic devices corrode because tiny metal tracks, solder joints and connectors are exposed to moisture, ionic contamination... 1
- Why do we make alloys instead of using pure metals in engineering? In one line Alloys are made to improve properties of a pure metal, such as hardness, strength, corrosion resistance, melting point, castabil... 1
- What does the Gibbs phase rule state and what does F = C − P + 2 mean? In one line The Gibbs phase rule states that for a heterogeneous system in equilibrium, not influenced by gravity, electric or magnetic forc... 1
- What is a phase in the phase rule, and how do you count phases in a system? In one line A phase is any homogeneous, physically distinct and mechanically separable part of a system, separated from other parts by a def... 1
- What is a component in the phase rule, and how do you find the number of components? In one line The number of components is the smallest number of independently variable chemical constituents by which the composition of ever... 1
- What are degrees of freedom in the phase rule, and what do invariant and univariant systems mean? In one line Degrees of freedom (F) are the minimum number of independent variables, such as temperature, pressure and concentration, that mu... 1
- What is the reduced (condensed) phase rule and why is it used for alloy systems? In one line For solid–liquid (condensed) systems where the vapour phase is negligible and experiments are done at constant atmospheric press... 1