Engineering
- A 40 kg block hangs from joint B. Cord BA goes up to the left to a fixed support A, making 35° with the horizontal at B, and cord BC goes up to the right to a fixed support C, making 50° with the horizontal at B. Determine the tensions in cords AB an… Answer: T_AB=253.2 N, T_BC=322.7 N. Weight W=40×9.81=392.4 N. FBD of joint B: T_AB up-left at 35°, T_BC up-right at 50°, W downward. Σ F_x=0... 1
- An alloy of Cd and Bi contains 25% of Cd. Find the mass of eutectic in 1 kg of the solid alloy, if the eutectic contains 40% of Cd. (asked in MU June 2025 KT; also Dec 2025) Answer: Mass of eutectic =625 g; the remaining 375 g is pure Bi. The alloy (25% Cd) has less Cd than the eutectic (40% Cd), so it lies on th... 1
- Explain the term 'glass transition temperature' with its significance. (asked in MU Dec 2024) Answer: T_g is the temperature below which an amorphous polymer is hard and glassy and above which it becomes soft, flexible and rubbery; it... 1
- Explain the viscoelastic property of polymers. (asked in MU June 2025 KT) Answer: Polymers show both elastic (spring-like, recoverable) and viscous (flow-like, time-dependent) behaviour, so their deformation depend... 1
- In a polymer sample, 20% of the molecules have molecular mass 10,000, 50% have molecular mass 25,000 and 30% have molecular mass 40,000. Calculate the number average and weight average molecular weights and the polydispersity index of the sample. Answer: bar M_n=26,500; bar M_w=30,660; PDI =1.157. Take 100 molecules: n₁=20,\ M₁=10000; n₂=50,\ M₂=25000; n₃=30,\ M₃=40000. Number average... 1
- Give the definitions and significance of the following properties of polymers: tensile strength, insulation resistance and refractive index. (asked in MU June 2025 KT) Answer: Tensile strength is the maximum stretching stress a polymer can bear before breaking; insulation resistance is its resistance to cur... 1
- Define matrix phase and dispersed phase with examples. (asked in MU Dec 2024; also June 2025 KT) Answer: The matrix is the continuous phase that binds and surrounds the reinforcement; the dispersed phase is the discontinuous reinforcing... 1
- Explain laminar composites and sandwich panels of structural composites. (asked in MU Dec 2024) Answer: Laminar composites are stacks of bonded sheets (laminae) with different fibre orientations; sandwich panels have two strong, thin fa... 1
- What are fibre-reinforced composites? Explain glass-fibre reinforced and carbon-fibre reinforced polymer composites, with their applications and limitations. Answer: Composites in which strong, stiff fibres are embedded in a softer matrix. GFRP (glass fibres in polyester/epoxy) is cheap and strong... 1
- Classify composites with the help of a diagram (tree chart) and give an example of each class. Answer: Composites are classified into particle-reinforced (large-particle, dispersion-strengthened), fibre-reinforced (continuous aligned,... 1
- List the twelve principles of green chemistry. Answer: Prevention, atom economy, less hazardous synthesis, safer chemicals, safer solvents, energy efficiency, renewable feedstocks, fewer... 1
- What is supercritical CO₂ and how does it differ from liquid and gaseous CO₂? (asked in MU June 2025 KT) Answer: CO₂ above its critical temperature (31.1 °C) and critical pressure (about 73.8 bar) is a supercritical fluid: it has liquid-like den... 1
- Explain the synthesis of adipic acid by the traditional and the green pathway. Also write the principles of green chemistry involved in the green reaction. (asked in MU June 2025 KT; also Dec 2025) Answer: Traditional: benzene → cyclohexane → cyclohexanol/cyclohexanone → HNO₃ oxidation, releasing N₂O. Green: glucose → cis,cis-muconic ac... 1
- Write an informative note on biodiesel. (asked in MU June 2025 KT) Answer: Biodiesel is a mixture of fatty acid methyl (or ethyl) esters made by transesterifying vegetable oils or animal fats with methanol i... 1
- What are the characteristics of a good fuel? (asked in MU Dec 2024) Answer: A good fuel has high calorific value, suitable ignition temperature, low moisture, ash and sulphur, burns at a controllable rate wit... 1
- 1.2 g of a coal sample was digested by Kjeldahl's method. The ammonia liberated was absorbed in 40 mL of 0.1 N H₂SO₄. The excess acid required 18 mL of 0.1 N NaOH for neutralisation. Calculate the percentage of nitrogen in the coal. Answer: Nitrogen =2.57%. Principle: the coal is heated with concentrated H₂SO₄ (with K₂SO₄ and CuSO₄ as catalyst), which converts its nitrog... 1
- Calculate the gross and net calorific value of coal having the following composition: carbon = 85%, hydrogen = 8%, sulphur = 1%, nitrogen = 2%, ash = 4%, and the latent heat of steam is 587 cal/g. (asked in MU Dec 2025) Answer: GCV =9650.4 kcal/kg; NCV =9227.8 kcal/kg. The composition adds up to 100% (85 + 8 + 1 + 2 + 4), so oxygen =0%. Dulong's formula: GCV... 1
- Explain how the percentage of sulphur in a coal sample is determined, and write its significance. In such a determination, 1.5 g of coal burnt in a bomb calorimeter gave 0.12 g of BaSO₄. Calculate the percentage of sulphur in the coal. Answer: Sulphur is converted to sulphate and weighed as BaSO₄; %S=(32×wt. of BaSO₄×100)/(233×wt. of coal). Here %S=1.10%. Procedure (ultimat... 1
- Explain the sacrificial anode cathodic protection method with a neat and well-labelled diagram. (asked in MU Dec 2025) Answer: The metal to be protected is connected to a more active metal (Mg, Zn or Al), which becomes the anode and corrodes instead of it. Pr... 1
- Explain the effect of the following factors on the rate of corrosion: (i) pH of the medium, (ii) purity of the metal, (iii) relative areas of the anodic and cathodic parts, (iv) nature of the corrosion product. Answer: Corrosion is faster at low pH, in impure metals, when the anode is small and the cathode large, and when the corrosion product is po... 1
- How can material selection and proper design of equipment prevent corrosion? Explain with the help of diagrams and designing principles. (asked in MU June 2025 KT; similar in Dec 2025) Answer: Choose metals and alloys that resist the environment and avoid dissimilar-metal contact; design to avoid crevices, stagnant water, s... 1
- Explain the mechanism of electrochemical (wet) corrosion of iron by (a) hydrogen evolution in an acidic medium and (b) oxygen absorption in a neutral, aerated medium. Show how rust is formed. Answer: In both cases iron is the anode, Fe→Fe²⁺+2e^-. (a) In acid, H⁺ is reduced to H₂ at the cathode. (b) In neutral aerated water, O₂ is... 1
- Explain the terms involved in Gibbs phase rule with an example of a one-component system. (Phase, Component and Degree of Freedom) (asked in MU Dec 2025) Answer: F=C-P+2. For the water system at the triple point, C=1, P=3 (ice, water, vapour), so F=0. Gibbs phase rule: for a heterogeneous syst... 1
- Why are alloys preferred over pure metals in many applications? Give the purposes of making alloys with one example each. Answer: Alloying improves hardness and strength, corrosion resistance, castability and other properties, and can lower the melting point or... 1