Engineering
- How is the ICR method applied to a wheel rolling without slipping? In one line For rolling without slipping, the contact point with the ground is the ICR, so every point's velocity equals ω times its distanc... 1
- How do you use the ICR method for a crank and connecting rod (two-link) mechanism? In one line Use the crank's known rotation to get the velocity of the crank pin, then locate the connecting rod's ICR from the crank-pin and... 1
- How is Newton's second law used to relate force and acceleration of a particle in kinetics? In one line Kinetics links motion to its cause: the net force on a particle equals its mass times its acceleration, Σ F = ma, applied along... 1
- What is D'Alembert's principle and what is the inertia force in dynamic equilibrium? In one line D'Alembert's principle says that adding a fictitious inertia force -ma to the real forces turns a dynamics problem into an equil... 1
- How are equations of dynamic equilibrium applied to connected bodies over a pulley? In one line Draw an FBD of each body with its inertia force, link them through the common string tension and acceleration, and solve the equ... 1
- What is the principle of linear impulse and momentum and how is it applied? In one line The impulse of the net force on a particle over a time interval equals the change in its linear momentum. Explained simply Catch... 1
- What is the law of conservation of linear momentum and when can it be applied? In one line If no net external impulse acts on a system, its total linear momentum stays the same before and after an interaction. Explained... 1
- What is an impact, and what are direct, oblique and central impacts and the phases of collision? In one line An impact is a collision of two bodies over a very short time with very large forces; it is classified by the line of impact and... 1
- What is the coefficient of restitution and how is it found from relative velocities or bounce heights? In one line The coefficient of restitution e is the ratio of the relative velocity of separation to the relative velocity of approach along... 1
- How do you solve a direct central impact between two bodies using momentum and restitution? In one line Use conservation of momentum and the coefficient of restitution as two equations to find the two unknown final velocities. Expla... 1
- How is an oblique central impact solved, for a ball hitting a smooth surface or another ball? In one line Resolve velocities along and perpendicular to the line of impact; the perpendicular (tangential) components do not change, and t... 1
- How do you calculate the loss of kinetic energy in a collision of inelastic bodies? In one line Kinetic energy before minus kinetic energy after gives the loss, which depends on (1 - e²) and is zero only for a perfectly elas... 1
- What are the basic parts of a robot manipulator: links, joints, end effector and workspace? In one line A robot manipulator is a chain of rigid links connected by joints, starting at a fixed base and ending at an end effector that d... 1
- What is degree of freedom of a robot and how is it counted for a serial manipulator? In one line Degree of freedom (DOF) is the number of independent variables needed to fully describe a robot's configuration; for a serial ro... 1
- What is forward kinematics of a robot and how do you find the end-effector position of a 2-link planar arm? In one line Forward kinematics finds the end-effector's position and orientation from known joint variables; for a 2R planar arm it is simpl... 1
- What is a homogeneous transformation matrix and how does it combine rotation and translation? In one line A homogeneous transformation matrix is a 4×4 matrix that rotates and translates a point (or frame) in one multiplication, so suc... 1
- What are Denavit-Hartenberg (D-H) parameters and how are frames assigned to robot links? In one line D-H parameters are four numbers per link ( θ, d, a, α) that describe how each joint frame is placed relative to the previous one... 1
- How do you find the forward kinematics of a 2-DOF serial robot using D-H homogeneous transformations? In one line Write the D-H table, form each link's transformation matrix, and multiply them; the last column of the result gives the end-effe... 1
- How are force systems classified into coplanar, concurrent, parallel and non-coplanar types? In one line A force system is classified by whether the forces lie in one plane and whether their lines of action meet at a point or are par... 1
- What is the principle of transmissibility of a force and what are its limits? In one line A force acting on a rigid body can be slid anywhere along its own line of action without changing its external effect on the bod... 1
- How do you resolve a force into components and combine two forces into a resultant? In one line Resolution splits one force into perpendicular parts; composition combines several forces into one equivalent force called the r... 1
- How do you find the resultant of a coplanar concurrent force system by the method of resolution? In one line Add up all horizontal components and all vertical components separately; these two sums give the size and direction of the singl... 1
- How do you find the magnitude and position of the resultant of coplanar parallel forces? In one line The resultant of parallel forces equals their algebraic sum, and its position is found by making its moment equal to the total m... 1
- How is the resultant of a general coplanar (non-concurrent) force system found and located? In one line Find the resultant's magnitude and direction from Σ F_x and Σ F_y, then locate its line of action using Σ M about a point. Expla... 1