Skip to content
doubtly

Composites Notes FE Sem 2 Engineering Materials | MU

Doubtly 12 min read Updated 27 Oct 2026 Save WhatsApp Save as PDF
On this page

An aircraft wing, a cricket bat handle, a bullet-resistant vest, a car tyre and even ordinary concrete are composites: materials made by combining two or more different materials so that the product is better than either one alone. This module explains what a composite is, its constituents (matrix and reinforcement), and the three main types with their sub-types and applications: fibre-reinforced composites, layered composites (laminates) and particulate composites. It ends with bio-composites, their definition, classification and applications. It maps to course outcome CO3. Typical questions ask for the classification of composites with examples, a note on one type, or a note on bio-composites.

Summary

Composite materials: A composite is a multiphase material formed by combining two or more chemically different constituents, insoluble in each other, which remain separate and distinct with a recognisable interface between them, so that the combination has properties superior to those of the individual constituents. Examples: glass fibre reinforced plastic, carbon fibre reinforced epoxy, plywood, concrete, cemented carbide tool tips. Natural composites include wood (cellulose fibres in a lignin matrix) and bone (collagen fibres with hydroxyapatite mineral).

Constituents of a composite: (i) The matrix phase is the continuous phase. It binds the reinforcement together, gives shape, transfers and distributes the load to the reinforcement, protects it from the environment and mechanical damage, and stops cracks from spreading. Matrices are polymers (polymer matrix composites, PMC, for example epoxy, polyester), metals (metal matrix composites, MMC, for example aluminium, titanium) or ceramics (ceramic matrix composites, CMC, for example SiC, alumina). (ii) The reinforcement or dispersed phase (fibres, particles, flakes or layers) carries most of the load and gives strength and stiffness. (iii) The interface between them must give good bonding so that load passes from matrix to reinforcement.

Why composites are used: high strength-to-weight and stiffness-to-weight ratios, corrosion and chemical resistance, good fatigue and impact resistance, low thermal expansion, and properties that can be designed for the job by choosing the matrix, reinforcement, amount and orientation. Limitations: higher cost, properties that depend on direction (anisotropy), difficulty of repair and joining, and difficulty in recycling.

Fibre-reinforced composites: These contain strong, stiff fibres embedded in a matrix. They give the highest strength and stiffness for their weight. Sub-types by fibre length and arrangement: continuous (long) aligned fibres, discontinuous (short) aligned fibres, and discontinuous randomly oriented fibres. Common fibres: glass (GFRP), carbon (CFRP), aramid such as Kevlar, boron, and natural fibres. Applications: GFRP for boat hulls, car body panels, pipes, storage tanks, helmets and water tanks; CFRP for aircraft structures, racing cars, bicycle frames, tennis racquets, cricket bat handles and wind turbine blades; Kevlar composites for bullet-resistant vests, helmets and ropes; boron-epoxy for aerospace parts.

Layered (laminar) composites: These are made by stacking and bonding sheets or layers (laminae) of materials, either different materials or the same fibre-reinforced layer with fibres in different directions, so the strength is high in all directions in the plane. Sub-types: laminates such as plywood (wood veneers with grain at right angles), laminated safety glass, decorative laminates (paper layers impregnated with melamine or phenolic resin), clad metals such as Alclad (duralumin coated with pure aluminium) and bimetallic strips; and sandwich panels, in which two thin, strong face sheets (aluminium, CFRP, GFRP) are bonded to a thick, light core (honeycomb, foam, balsa wood). Applications: furniture, doors and partitions, car windscreens, kitchen counter tops, aircraft floors and wings, helicopter rotor blades, ship decks and building panels.

Particulate composites: These contain particles of one material dispersed in a matrix of another. Sub-types: (i) large-particle composites, where particles are relatively coarse and restrict matrix movement, for example concrete (sand and gravel in cement), cermets such as cemented carbide (tungsten carbide particles in cobalt), and carbon black in rubber tyres; (ii) dispersion-strengthened composites, where very fine particles (about 10 to 100 nm) block dislocation movement in a metal, for example thoria-dispersed nickel (TD nickel) and sintered aluminium powder (SAP, Al2O3 in Al). Applications: buildings and roads, cutting tools and drill bits, tyres, electrical contacts (silver-tungsten), high-temperature turbine parts, brake pads.

Bio-composites: A bio-composite is a composite in which at least one constituent, the reinforcement or the matrix, comes from a biological (renewable) source. Reinforcements are natural fibres: plant fibres such as jute, flax, hemp, kenaf, sisal, coir, bamboo, cotton and wood fibres, or animal fibres such as silk and wool. Matrices may be petroleum polymers (polypropylene, polyethylene, epoxy) or biopolymers (polylactic acid PLA, polyhydroxyalkanoates PHA, starch, cellulose derivatives, soy protein, natural rubber). Classification: partly biodegradable bio-composites (natural fibre in a petroleum polymer, or synthetic fibre in a biopolymer) and fully biodegradable green composites (natural fibre in a biopolymer). They are also classified as natural (wood, bone) and synthetic, or by fibre source as wood fibre and non-wood fibre composites. Applications: automobile door panels, seat backs and dashboards, packaging, wood-plastic composite decking and furniture, particle boards, building panels, consumer goods, and biomedical uses such as bone scaffolds and sutures.

Mind map

Composites

  • Constituents
    • Matrix: binds, transfers load
    • Reinforcement: strength, stiffness
    • Interface: bonding
    • PMC, MMC, CMC
  • Fibre-reinforced
    • Continuous aligned
    • Discontinuous aligned
    • Discontinuous random
    • GFRP, CFRP, Kevlar
  • Layered (laminates)
    • Laminates: plywood, safety glass, Alclad
    • Sandwich panels: face sheets + core
  • Particulate
    • Large-particle: concrete, cermets, tyres
    • Dispersion-strengthened: TD nickel, SAP
  • Bio-composites
    • Natural fibres: jute, flax, hemp, coir
    • Biopolymers: PLA, PHA, starch
    • Partly vs fully biodegradable
    • Auto parts, packaging, decking

Classification of composites

TypeSub-typesExamplesApplications
Fibre-reinforcedContinuous aligned; discontinuous aligned; discontinuous randomGFRP, CFRP, Kevlar-epoxy, boron-epoxy, SiC fibre in AlAircraft, boats, car panels, sports goods, pipes, tanks, armour, wind turbine blades
Layered (laminar)Laminates; sandwich panelsPlywood, laminated glass, decorative laminates, Alclad, honeycomb sandwichFurniture, windscreens, counter tops, aircraft floors and wings, building panels
ParticulateLarge-particle; dispersion-strengthenedConcrete, cemented carbide (WC-Co), carbon black in rubber, TD nickel, SAPConstruction, cutting tools, tyres, high-temperature parts, electrical contacts

Bio-composites in detail

ClassReinforcementMatrixExample and use
Natural bio-compositesCellulose fibres / collagenLignin / hydroxyapatiteWood, bone (occur in nature)
Partly biodegradableNatural fibrePetroleum polymer (PP, PE, epoxy)Jute-polypropylene or kenaf-PP car door panels; wood-plastic composite decking
Partly biodegradableSynthetic fibre (glass, carbon)Biopolymer or bio-based resinGlass fibre in bio-epoxy for panels
Fully biodegradable (green composites)Natural fibreBiopolymer (PLA, PHA, starch)Flax-PLA or jute-PLA packaging trays, disposable items, interior parts
BiomedicalHydroxyapatite, bioactive glass, natural fibresBiodegradable polymers (PLA, PCL), collagenBone scaffolds, bone fixation devices, tissue engineering

Advantages of bio-composites: renewable raw materials, lower density than glass fibre composites, lower cost of fibres, less energy to produce, reduced carbon footprint, biodegradable or easier disposal, non-abrasive to machines and safe to handle. Limitations: moisture absorption by natural fibres, variable fibre quality, poor fibre-matrix bonding (fibres are hydrophilic, many matrices hydrophobic, so fibres are often chemically treated), and lower heat resistance.

Important definitions

TermMeaning
Composite materialA material made of two or more distinct constituents with a clear interface, whose combination has better properties than the individual constituents.
MatrixThe continuous phase of a composite that holds the reinforcement and transfers load to it.
Reinforcement (dispersed phase)The discontinuous phase (fibres, particles, layers) that gives strength and stiffness.
Fibre-reinforced compositeA composite with fibres as the reinforcement in a matrix.
LaminateA layered composite made by bonding sheets (laminae) together, often with different orientations.
Sandwich panelA layered composite of two strong, thin face sheets bonded to a thick, light core.
Particulate compositeA composite with particles of one material dispersed in a matrix.
CermetA ceramic-metal composite, for example tungsten carbide particles in a cobalt matrix.
Dispersion strengtheningStrengthening a metal by very fine, uniformly dispersed hard particles that block dislocation movement.
Bio-compositeA composite in which at least one constituent is derived from a biological, renewable source.
Green compositeA fully biodegradable bio-composite of natural fibres in a biopolymer matrix.

Formulas

The syllabus does not ask for composite numericals, but the rule of mixtures helps you explain why fibres make a composite stiff.

FormulaMeaning
\( V_f + V_m = 1 \)Volume fractions of fibre and matrix.
\( \rho_c = \rho_f V_f + \rho_m V_m \)Density of the composite.
\( E_{c,\parallel} = E_f V_f + E_m V_m \)Modulus along continuous aligned fibres (equal strain).
\( \dfrac{1}{E_{c,\perp}} = \dfrac{V_f}{E_f} + \dfrac{V_m}{E_m} \)Modulus across the fibres (equal stress), much lower.

Key points to remember

  • Matrix binds and transfers load; reinforcement carries load.
  • Three main types: fibre-reinforced, layered (laminar), particulate.
  • Fibre-reinforced sub-types: continuous aligned, discontinuous aligned, discontinuous random.
  • Layered sub-types: laminates (plywood, safety glass) and sandwich panels (honeycomb core).
  • Particulate sub-types: large-particle (concrete, cermets) and dispersion-strengthened (TD nickel, SAP).
  • Carbon black in tyres is a particulate reinforcement.
  • Composites are strong and stiff along the fibres but weaker across them (anisotropic).
  • Bio-composite: at least one constituent from a biological source; green composite: both.
  • Natural fibres absorb moisture and need surface treatment for good bonding.

Solved examples

Example 1. A CFRP contains 60% by volume carbon fibres (E = 230 GPa, density 1.8 g/cm³) in epoxy (E = 3.5 GPa, density 1.2 g/cm³). Find the density and the modulus along and across the fibres.

\( \rho_c = 1.8\times0.6 + 1.2\times0.4 = 1.56 \) g/cm³. Along the fibres: \( E = 230\times0.6 + 3.5\times0.4 = 139.4 \) GPa. Across: \( 1/E = 0.6/230 + 0.4/3.5 = 0.00261 + 0.11429 = 0.11690 \), \( E = 8.55 \) GPa. The composite is about 16 times stiffer along the fibres than across them.

Example 2. A GFRP has 40% by volume E-glass fibres (E = 72 GPa) in polyester (E = 3 GPa). Find the longitudinal modulus and the share of load carried by the fibres.

\( E_c = 72\times0.4 + 3\times0.6 = 28.8 + 1.8 = 30.6 \) GPa. In equal strain the load share is proportional to \(E V\): fibres carry \( 28.8/30.6 = 0.94 \), that is 94% of the load, although they are only 40% of the volume.

Important questions and answers

Q1. What are composite materials? Explain the functions of matrix and reinforcement. (5 marks)

A composite is a multiphase material made by combining two or more distinct constituents, insoluble in each other and separated by an interface, so that the product has properties better than the constituents. Matrix (continuous phase: polymer, metal or ceramic): binds the reinforcement, gives shape, transfers and distributes the applied load, protects the reinforcement from moisture, chemicals and abrasion, and prevents crack propagation. Reinforcement (fibres, particles, layers): carries the major part of the load and provides strength, stiffness, hardness and sometimes thermal or electrical properties. Good interfacial bonding is essential for load transfer. Examples: GFRP, CFRP, concrete, plywood.

Q2. Classify composites and give examples. (5 marks)

Based on reinforcement: (i) Fibre-reinforced: continuous aligned, discontinuous aligned, discontinuous random; examples GFRP, CFRP, Kevlar-epoxy. (ii) Layered or laminar: laminates (plywood, laminated glass, Alclad) and sandwich panels (aluminium honeycomb core with CFRP skins). (iii) Particulate: large-particle (concrete, WC-Co cermet, carbon black in rubber) and dispersion-strengthened (TD nickel, SAP). Based on matrix: polymer matrix (PMC), metal matrix (MMC) and ceramic matrix (CMC) composites.

Q3. Write a note on fibre-reinforced composites. (5 marks)

Fibre-reinforced composites contain strong, stiff fibres embedded in a matrix. The fibres carry the load; the matrix holds them, transfers load by shear at the interface and protects them. Properties depend on fibre type, volume fraction, length and orientation: continuous aligned fibres give the highest strength in one direction; short random fibres give lower but nearly equal properties in all directions. Fibres: glass (cheap, good strength), carbon (very high stiffness, low density), aramid or Kevlar (high toughness and impact resistance), boron. Applications: GFRP in boat hulls, car panels, pipes and tanks; CFRP in aircraft, racing cars, bicycles and sports goods; Kevlar in body armour and helmets.

Q4. Explain layered composites with examples. (4 marks)

Layered composites are built by bonding sheets (laminae) together. In laminates, layers of the same or different materials are stacked, often with the strong direction of each layer at an angle to the next, giving good strength in all directions in the plane: plywood, laminated safety glass, melamine decorative laminates, Alclad sheet. In sandwich panels, two thin, strong face sheets are bonded to a light, thick core of honeycomb, foam or balsa, giving high bending stiffness at very low weight: aircraft floors, wings, helicopter rotor blades, ship decks, building panels.

Q5. Write a note on particulate composites. (4 marks)

Particulate composites consist of particles of one material dispersed in a matrix of another; properties are nearly the same in all directions. Large-particle composites: particles are coarse and restrain matrix deformation; concrete (gravel and sand in cement), cemented carbide (WC in Co) for cutting tools, carbon black in rubber tyres for wear resistance and strength. Dispersion-strengthened composites: very fine (10 to 100 nm) hard particles such as ThO2 in Ni or Al2O3 in Al block dislocation movement and keep strength at high temperatures; used in turbine and furnace parts.

Q6. What are bio-composites? Give their classification and applications. (5 marks)

Bio-composites are composites in which at least one constituent, the reinforcement or the matrix, comes from a renewable biological source. Classification: (i) partly biodegradable, natural fibre (jute, flax, hemp, kenaf, coir) in a petroleum polymer (PP, PE, epoxy), or synthetic fibre in a biopolymer; (ii) fully biodegradable or green composites, natural fibre in a biopolymer such as PLA, PHA or starch; natural bio-composites such as wood and bone also exist. Applications: automobile door panels, dashboards and seat backs; packaging; wood-plastic composite decking, fencing and furniture; particle boards and building panels; consumer goods; biomedical bone scaffolds and fixation devices. Advantages: renewable, light, cheap, low energy, biodegradable; limitations: moisture absorption and weaker fibre-matrix bonding.

Q7. State advantages and limitations of composite materials. (3 marks)

Advantages: high strength and stiffness per unit weight, corrosion resistance, good fatigue resistance, low thermal expansion, tailor-made properties, parts can be moulded in complex shapes. Limitations: high cost, anisotropic properties, difficult joining and repair, damage hidden below the surface, difficult recycling.

Exam tips

  • Start every composites answer with a crisp definition mentioning matrix, reinforcement and superior combined properties.
  • Draw small sketches: aligned and random fibres, a laminate with layers at different angles, a honeycomb sandwich, particles in a matrix.
  • Give at least two examples and two applications for each type and sub-type.
  • For bio-composites, name actual fibres (jute, flax, hemp, coir) and matrices (PLA, PHA, PP).
  • Remember that concrete is a particulate composite and plywood a laminate; these are easy marks.

FAQs

Is an alloy a composite?

No. In an alloy the elements mix on the atomic scale into one or more metallic phases. A composite keeps distinct constituents separated by a visible interface.

Why are fibres stronger than the same material in bulk?

Thin fibres contain far fewer and smaller flaws, so they reach strengths close to the theoretical value. Bulk glass, for example, fails from surface cracks at much lower stress.

Why is the matrix needed if fibres carry the load?

Loose fibres cannot carry compression or shear and are easily damaged. The matrix holds them in position, transfers load between them and protects them.

Are bio-composites always biodegradable?

No. Only green composites, with natural fibres in a biopolymer matrix, are fully biodegradable. Natural fibres in polypropylene are only partly biodegradable.

These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Engineering Materials) and were prepared with AI help and checked.

More in Engineering Materials

See all →