Skip to content
doubtly

Nanotechnology Notes FE Sem 2 Measurements and Sensors | MU

Doubtly 20 min read Updated 27 Oct 2026 Save WhatsApp Save as PDF
On this page

A nanometre is a billionth of a metre, roughly the width of ten hydrogen atoms in a row or about one eighty-thousandth of the thickness of a human hair. When materials are made this small, their colour, conductivity, strength and chemical activity change. This last module of Physics of Measurements and Sensors (BSC2023, FE Semester 2) introduces nanotechnology, the special optical, electrical, structural and mechanical properties of nanomaterials, the importance of the surface to volume ratio, van der Waals bonding, the three key tools for seeing and measuring at the nanoscale (SEM, TEM and AFM) and applications in toxic gas sensing, gas sensing capacitors, lithography and water purification. It maps to CO6. Questions are mostly descriptive: principle and diagram of an electron microscope or AFM, plus a short note on an application.

Summary

Introduction to nanotechnology: Nanoscience is the study of phenomena and materials at the scale of about 1 to 100 nm in at least one dimension; nanotechnology is the design, production and use of structures and devices at this scale. The idea was popularised by Richard Feynman's 1959 lecture "There's Plenty of Room at the Bottom", the word nanotechnology was coined by Norio Taniguchi in 1974, and progress became rapid after the invention of the scanning tunnelling microscope (1981) and the atomic force microscope (1986), the discovery of fullerenes (1985) and the reporting of carbon nanotubes (1991). Nanomaterials are classified by how many dimensions are in the nano range: zero-dimensional (all three dimensions nanoscale: nanoparticles, quantum dots, fullerenes), one-dimensional (nanowires, nanorods, nanotubes), two-dimensional (thin films, graphene, nanosheets) and three-dimensional bulk nanostructured materials (nanocrystalline metals, nanocomposites). Two broad routes make them: top-down (cutting down bulk material by milling or lithography) and bottom-up (building from atoms and molecules by chemical vapour deposition, sol-gel, self-assembly).

Why properties change at the nanoscale: Two effects dominate. (1) Surface effects: a large fraction of atoms are at the surface, where they have fewer neighbours and unsatisfied bonds, so they are more reactive and change melting point, strength and catalysis. (2) Quantum effects: when the size becomes comparable to the de Broglie wavelength of electrons (a few nm), electrons are confined, the continuous energy bands of the bulk split into discrete levels and the band gap increases as size decreases (quantum confinement).

Optical properties: Gold in bulk is yellow, but gold nanoparticles of about 10 to 20 nm give a ruby red colour, and the colour changes with size and shape because of surface plasmon resonance (collective oscillation of conduction electrons at the particle surface absorbing particular wavelengths); this was used unknowingly in medieval stained glass and the Roman Lycurgus cup. Semiconductor quantum dots (for example CdSe) emit light whose colour shifts from red to blue as the particle size decreases, since the band gap grows; they are used in QLED displays and bio-imaging. Nanoparticles of TiO2 and ZnO are transparent to visible light but absorb UV, so they are used in transparent sunscreens.

Electrical properties: Quantum confinement changes the band gap and density of states; conduction can occur by tunnelling through thin barriers; a single electron can control current through a tiny island (single electron transistor). Carbon nanotubes can be metallic or semiconducting depending on how the graphene sheet is rolled (chirality) and can carry very high current densities. Graphene has very high electron mobility. Very thin metal wires have higher resistivity than bulk because electrons scatter from surfaces and grain boundaries.

Structural properties: Nanoparticles have a large fraction of surface atoms, slightly reduced lattice spacing, and often different crystal structures or shapes from the bulk. Melting point decreases with size; gold nanoparticles of about 2 to 3 nm melt hundreds of degrees below bulk gold (1064 °C). Nanomaterials can self-assemble into ordered structures.

Mechanical properties: Nanocrystalline metals are harder and stronger than coarse grained ones because grain boundaries block dislocation motion (the Hall-Petch effect, valid down to grain sizes of roughly 10 to 20 nm). Carbon nanotubes have Young's modulus of about 1 TPa and tensile strengths of tens of GPa, many times that of steel, at a fraction of the density. Nanocomposites (polymers reinforced with nanoclay, CNT or graphene) are light and strong. Some nanoceramics become ductile at high temperature (superplasticity).

Importance of surface to volume ratio: For a sphere of radius r, surface area \(4\pi r^2\), volume \(\tfrac{4}{3}\pi r^3\), so S/V = 3/r; for a cube of side a, S/V = 6/a. The ratio rises as the size falls: a 10 nm particle has a million times more surface per unit volume than a 1 cm one. A 1 cm cube has 6 cm² surface; cut into 10 nm cubes it gives 600 m², about the area of a large house plot. Consequences: much higher chemical reactivity and catalytic activity (fuel cells, catalytic converters), faster dissolution and drug delivery, high adsorption capacity (water purification), high sensitivity of gas sensors (more sites for gas molecules), lower melting points, and changed mechanical behaviour. In a cube of N x N x N atoms the fraction of atoms on the surface is \(1 - (N-2)^3/N^3\): about 49 percent for N = 10 but only about 6 percent for N = 100.

Bonding in solids, van der Waals interactions: Solids are held together by ionic, covalent, metallic, hydrogen and van der Waals bonds. Van der Waals forces are weak attractive forces between neutral atoms or molecules due to electric dipoles: dipole-dipole (Keesom) between permanent dipoles, dipole-induced dipole (Debye), and dispersion (London) forces between instantaneous dipoles caused by fluctuating electron clouds, which act between all atoms, even noble gases. Their energy is small, typically about 0.1 to 10 kJ/mol compared with hundreds of kJ/mol for covalent bonds, and the attractive potential falls very rapidly, as \(1/r^6\). Combined with short range repulsion they are described by the Lennard-Jones potential \(U(r) = 4\varepsilon[(\sigma/r)^{12} - (\sigma/r)^6]\). Examples: solid argon, layers of graphite and MoS2 sliding over each other, molecular crystals, physical adsorption of gases on surfaces. At the nanoscale van der Waals forces become very important: they make nanoparticles stick together (agglomeration), hold stacks of 2D materials together, let geckos climb walls using millions of nanoscale hairs, and are the forces sensed by the tip of an atomic force microscope.

Scanning Electron Microscope (SEM): An electron gun (tungsten filament, LaB6 or field emission) produces electrons accelerated through about 1 to 30 kV. Electromagnetic condenser and objective lenses focus them into a fine probe (a few nm wide) on the specimen; scan coils raster the probe across the surface. The beam knocks out low energy secondary electrons from near the surface and also produces backscattered electrons and X-rays. A detector (Everhart-Thornley) collects the secondary electrons; their number depends on surface slope and composition, and the signal is displayed synchronously with the scan to build a magnified image with a striking three-dimensional look. The column is under high vacuum; non-conducting samples are coated with a thin gold or carbon layer to stop charging. Resolution about 1 to 10 nm, magnification up to several hundred thousand times. Backscattered electrons give composition contrast and X-rays (EDS) give elemental analysis. Uses: surface morphology of nanomaterials, fracture surfaces, IC inspection.

Transmission Electron Microscope (TEM): Electrons accelerated through about 80 to 300 kV have wavelengths of a few picometres (\(\lambda = h/\sqrt{2meV}\), about 3.7 pm at 100 kV after relativistic correction), so very high resolution is possible. A condenser lens system illuminates a very thin specimen (less than about 100 nm, prepared by ion milling or ultramicrotomy, or nanoparticles on a carbon-coated copper grid). Electrons pass through; denser or thicker regions scatter more, giving contrast. Objective, intermediate and projector lenses form a highly magnified image on a fluorescent screen or a digital camera. It can also give electron diffraction patterns showing crystal structure, and high-resolution TEM can show lattice planes and atom columns. Resolution about 0.1 to 0.2 nm (better with aberration correctors), magnification up to a million times or more. Limitations: thin sample preparation is difficult, high vacuum, expensive, beam can damage specimens.

Atomic Force Microscope (AFM): Invented by Binnig, Quate and Gerber in 1986. A very sharp tip (radius a few nm) at the free end of a flexible cantilever (silicon or silicon nitride, about 100 to 200 μm long) is brought close to the sample. Forces between tip and surface atoms (van der Waals, electrostatic, repulsive contact forces) bend the cantilever according to Hooke's law, \(F = -kx\). A laser beam reflected from the back of the cantilever falls on a position-sensitive (split) photodiode, which detects deflections smaller than 0.1 nm. A piezoelectric scanner moves the sample (or tip) in x and y, and a feedback loop adjusts its z height to keep the deflection (force) constant; the z movements give a three-dimensional topographic map. Modes: contact (tip touches, repulsive force), non-contact (tip oscillates above the surface, attractive van der Waals forces change its frequency) and tapping (intermittent contact, reduces damage to soft samples). Vertical resolution better than 0.1 nm, lateral a few nm. Advantages: works in air or liquid, needs no vacuum or conductive coating, can image biological samples and insulators, measures forces, friction and mechanical properties. Limitations: small scan area, slow, image affected by tip shape.

Applications in sensing toxic gases: Chemiresistive gas sensors use nanostructured metal oxide semiconductors such as SnO2, ZnO, WO3 and TiO2 (nanoparticles, nanowires, nanosheets), carbon nanotubes or graphene. In air, oxygen adsorbs on an n-type oxide surface and traps electrons, forming a depletion layer and raising resistance. A reducing gas (CO, H2S, NH3, methane, LPG, ethanol) reacts with the adsorbed oxygen, returns electrons and lowers the resistance; an oxidising gas (NO2, O3) raises it. The change in resistance indicates the gas concentration, down to parts per million or less. Nanostructures give high sensitivity because their huge surface area provides more adsorption sites and because their size is comparable to the depletion layer, so the whole grain is affected. Heating (often 150 to 400 °C) speeds the reaction; noble metal nanoparticles (Pt, Pd, Au) improve selectivity. Uses: CO and LPG alarms, H2S monitoring in sewers and refineries, NO2 monitoring of vehicle pollution, breath analysis.

Gas sensing capacitors: In a capacitive gas sensor a gas-sensitive dielectric layer (porous metal oxide, polymer, metal-organic framework or a nanomaterial film) is placed between electrodes, usually interdigitated electrodes on a substrate. When gas or water vapour molecules are adsorbed in the pores, the permittivity (and sometimes the thickness) of the layer changes, so the capacitance \(C = \varepsilon_0\varepsilon_rA/d\) changes. An oscillator or capacitance-to-digital circuit converts this into an output. Nanoporous layers give large internal area and fast response. Capacitive sensors consume very little power. The most common example is the capacitive humidity sensor; CO2, NH3 and VOC sensors are also made this way.

Introduction to lithography: Lithography is the process of transferring a pattern onto a substrate, the key step in making integrated circuits and nano-devices. Photolithography steps: (1) clean the wafer and grow or deposit a film (such as SiO2); (2) spin coat a light-sensitive photoresist; (3) soft bake; (4) expose through a mask to UV light (in projection systems the mask image is reduced); (5) develop: in a positive resist the exposed parts dissolve, in a negative resist the exposed parts remain; (6) etch the uncovered film (wet or plasma etching) or deposit material; (7) strip the remaining resist. The smallest feature is limited by diffraction, roughly proportional to λ/NA, so shorter wavelengths are used: deep UV 193 nm (with immersion) and extreme UV 13.5 nm for today's most advanced chips. Electron beam lithography writes patterns directly with a focused electron beam (features below 10 nm, slow, used for masks and research); nanoimprint lithography stamps patterns mechanically into a resist; dip-pen lithography uses an AFM tip to write molecules.

Water purification: Nanotechnology helps remove pollutants and microbes from water. Nanofiltration and reverse osmosis membranes with pores of about 1 nm remove hardness, salts, dyes and micro-pollutants at lower pressure than conventional RO. Nano-adsorbents with large surface area (activated carbon, CNTs, graphene oxide, iron oxide and alumina nanoparticles) remove heavy metals such as arsenic, lead and mercury and fluoride. Silver nanoparticles and silver coated filters kill bacteria. TiO2 nanoparticles act as photocatalysts that use UV light to break down organic pollutants and kill microbes. Zero-valent iron nanoparticles reduce and immobilise chlorinated organics and heavy metals in groundwater. Concerns: nanoparticles must not escape into the treated water, and their long-term toxicity and cost must be checked.

Mind map

Nanotechnology

  • Basics
    • 1 to 100 nm
    • 0D, 1D, 2D, 3D nanomaterials
    • Top-down, bottom-up
  • Properties
    • Optical: plasmon colour, quantum dots
    • Electrical: confinement, tunnelling, CNT
    • Structural: surface atoms, lower melting point
    • Mechanical: stronger, CNT 1 TPa
  • Surface to volume
    • Sphere 3/r, cube 6/a
    • Reactivity, sensing, adsorption
  • Van der Waals
    • Keesom, Debye, London
    • Weak, falls as 1/r⁶
    • Graphite layers, AFM forces
  • Instruments
    • SEM: secondary electrons, surface
    • TEM: transmitted electrons, thin sample
    • AFM: cantilever, laser, piezo scanner
  • Applications
    • Toxic gas sensors (SnO2, ZnO)
    • Capacitive gas sensors
    • Lithography
    • Water purification

How an AFM builds an image

  1. A sharp tip on a soft cantilever is brought to within a nanometre or so of the sample surface.
  2. Interatomic forces (attractive van der Waals at a distance, repulsive at contact) bend the cantilever by an amount \(x = F/k\).
  3. A laser reflected from the back of the cantilever falls on a four-quadrant photodiode; the spot moves when the cantilever bends, magnifying tiny deflections.
  4. A piezoelectric scanner moves the sample line by line in x and y.
  5. The feedback electronics move the scanner up or down in z to keep the deflection (or oscillation amplitude) at a set value.
  6. The z correction at each (x, y) point is recorded; it equals the height of the surface there.
  7. The computer plots these heights as a three-dimensional topographic image with sub-nanometre vertical resolution.

SEM, TEM and AFM compared

PointSEMTEMAFM
ProbeFocused scanning electron beamBroad electron beam through the sampleSharp tip on a cantilever
SignalSecondary and backscattered electronsTransmitted (and diffracted) electronsCantilever deflection (force)
InformationSurface morphology, composition (EDS)Internal structure, crystal lattice, defects3D surface topography, forces
ResolutionAbout 1 to 10 nmAbout 0.1 to 0.2 nmVertical below 0.1 nm, lateral a few nm
SampleBulk, conducting or coatedVery thin (below about 100 nm)Any, in air or liquid
VacuumNeededNeeded (high)Not needed

Important definitions

TermMeaning
NanotechnologyDesign, synthesis and use of materials and devices with at least one dimension of about 1 to 100 nm.
NanomaterialMaterial with at least one dimension in the nanoscale, showing size-dependent properties.
Quantum confinementRestriction of electron motion in a very small particle, giving discrete energy levels and a larger band gap.
Surface plasmon resonanceCollective oscillation of conduction electrons at a metal nanoparticle surface, causing strong absorption of particular wavelengths.
Surface to volume ratioRatio of surface area to volume; 3/r for a sphere; increases as size decreases.
Van der Waals forcesWeak attractions between neutral atoms or molecules caused by permanent, induced or instantaneous dipoles.
Secondary electronsLow energy electrons ejected from near the sample surface by the primary beam; used for SEM imaging.
CantileverFlexible beam carrying the AFM tip, whose deflection measures the tip-sample force.
ChemiresistorSensor whose resistance changes when gas molecules adsorb on it.
LithographyProcess of transferring a pattern from a mask or beam onto a substrate coated with resist.
PhotoresistLight-sensitive polymer that changes solubility when exposed; positive or negative.

Formulas

FormulaMeaning
\( \dfrac{S}{V} = \dfrac{4\pi r^2}{\tfrac{4}{3}\pi r^3} = \dfrac{3}{r} \)Surface to volume ratio of a sphere.
\( \dfrac{S}{V} = \dfrac{6}{a} \)Surface to volume ratio of a cube of side a.
\( f_s = 1 - \dfrac{(N-2)^3}{N^3} \)Fraction of atoms on the surface of a cube N atoms on a side.
\( U(r) = 4\varepsilon\left[\left(\dfrac{\sigma}{r}\right)^{12} - \left(\dfrac{\sigma}{r}\right)^{6}\right] \)Lennard-Jones potential; the \(r^{-6}\) term is the van der Waals attraction.
\( \lambda = \dfrac{h}{\sqrt{2meV}} \approx \dfrac{1.226}{\sqrt{V}}\ \text{nm} \)Electron wavelength after acceleration through V volts (non-relativistic).
\( F = -kx \)AFM cantilever force (Hooke's law).
\( C = \dfrac{\varepsilon_0\varepsilon_rA}{d} \)Capacitance of a parallel plate gas sensing capacitor.

Key points to remember

  • Nanoscale: 1 to 100 nm in at least one dimension.
  • Two reasons properties change: large surface fraction and quantum confinement.
  • Gold nanoparticles look red; smaller quantum dots emit bluer light.
  • S/V = 3/r: halving the size doubles the ratio.
  • Van der Waals forces are weak, universal and fall off as \(1/r^6\); they dominate adhesion at the nanoscale.
  • SEM looks at surfaces with secondary electrons; TEM looks through thin samples; AFM feels the surface with a tip.
  • TEM gives the highest resolution; AFM works without vacuum and on insulators.
  • Metal oxide nano gas sensors change resistance as gases react with adsorbed oxygen.
  • Capacitive gas sensors work by change of dielectric permittivity on adsorption.
  • Lithography: coat, expose, develop, etch, strip; resolution improves with shorter wavelength.

Solved examples

Example 1. Find the surface to volume ratio of spherical particles of radius 1 cm, 1 μm and 10 nm.

S/V = 3/r: \(3/10^{-2} = 300\) m^-1; \(3/10^{-6} = 3\times10^{6}\) m^-1; \(3/10^{-8} = 3\times10^{8}\) m^-1. The 10 nm particle has \(10^6\) times the ratio of the 1 cm sphere.

Example 2. A 1 cm cube is divided into cubes of side 10 nm. Find the total surface area.

Number of small cubes \(= (10^{-2}/10^{-8})^3 = 10^{18}\). Area of each \(= 6\times(10^{-8})^2 = 6\times10^{-16}\) m². Total \(= 600\) m², compared with \(6\times10^{-4}\) m² for the original cube, a millionfold increase.

Example 3. What fraction of atoms is on the surface of a cubic cluster with 10 atoms along each edge? With 100?

N = 10: \(1 - 8^3/10^3 = 1 - 0.512 = 0.488\), about 49 percent. N = 100: \(1 - 98^3/100^3 = 1 - 0.941 = 0.059\), about 6 percent.

Example 4. Find the de Broglie wavelength of electrons accelerated through 10 kV in an SEM.

\(\lambda = 1.226/\sqrt{10000}\) nm \(= 0.01226\) nm \(= 12.3\) pm. (The relativistic correction lowers it to about 12.2 pm.) This is far below visible wavelengths (400 to 700 nm), which is why electron microscopes resolve nanoscale detail.

Example 5. A capacitive gas sensor has electrodes of area 1 mm² separated by 1 μm. Its film permittivity rises from 4.0 to 4.5 on exposure to a gas. Find the change in capacitance.

\(C_1 = 8.854\times10^{-12}\times4.0\times10^{-6}/10^{-6} = 35.4\) pF; \(C_2 = 8.854\times10^{-12}\times4.5 = 39.8\) pF. Change about 4.4 pF (12.5 percent), easily measured.

Important questions and answers

Q1. What is nanotechnology? Explain the optical, electrical, structural and mechanical properties of nanomaterials. (6 marks)

Definition and scale as above. Optical: colour depends on size (gold sols red, silver yellow) due to surface plasmon resonance; quantum dots emit size-tunable colours; nano TiO2 and ZnO are transparent but block UV. Electrical: quantum confinement widens the band gap and makes levels discrete; tunnelling and single electron effects; CNTs metallic or semiconducting; surface scattering raises resistivity of nanowires. Structural: very high fraction of surface atoms, reduced lattice parameter, lower melting point, different crystal forms. Mechanical: nanocrystalline metals harder and stronger (Hall-Petch); CNTs with Young's modulus about 1 TPa and very high tensile strength; nanocomposites light and strong.

Q2. Explain the importance of surface to volume ratio in nanomaterials. (5 marks)

For a sphere S/V = 3/r, so as particles shrink the ratio increases inversely with size; a 10 nm particle has a million times the ratio of a 1 cm one, and in a 10-atom cube nearly half the atoms are on the surface. Surface atoms have broken bonds and higher energy, so nanomaterials are more reactive, better catalysts, better adsorbents, more sensitive gas sensors and faster dissolving drugs; they also melt at lower temperatures and show different mechanical behaviour. Example: platinum nanoparticles reduce the catalyst needed in fuel cells; ZnO nanowires make highly sensitive gas sensors.

Q3. Write a note on van der Waals bonding. (5 marks)

Weak attractive forces between neutral molecules due to dipole interactions: Keesom (permanent dipole-permanent dipole), Debye (permanent dipole-induced dipole), London dispersion (instantaneous dipole-induced dipole, present in all matter). Energy about 0.1 to 10 kJ/mol; non-directional; attraction varies as \(1/r^6\) (Lennard-Jones). Examples: solidification of noble gases, layers of graphite, molecular crystals such as iodine and solid CO2, physical adsorption. Nanoscale relevance: agglomeration of nanoparticles, stacking of 2D layers, gecko adhesion, AFM tip-sample forces.

Q4. Explain the principle, construction and working of a Scanning Electron Microscope. (6 marks)

Principle: a finely focused electron beam scanned over the surface ejects secondary electrons whose intensity depends on the topography; collecting them point by point forms an image. Construction: electron gun, anode (1 to 30 kV), condenser lenses, scan coils, objective lens, specimen chamber under vacuum, secondary electron detector (scintillator-photomultiplier), display synchronised with the scan. Working: the beam scans in a raster; emitted secondary electrons are attracted to the detector; signal strength modulates image brightness; magnification = display size ÷ scanned area. Features: large depth of field, 3D-like images, resolution a few nm, EDS for composition. Limitations: vacuum, conductive coating for insulators, surface only.

Q5. Explain the Transmission Electron Microscope. How is it different from SEM? (6 marks)

A high-voltage (80 to 300 kV) electron beam is focused by condenser lenses on an ultra-thin specimen; transmitted electrons are focused by objective, intermediate and projector lenses to form an enlarged image on a fluorescent screen or camera. Contrast arises from scattering differences (mass-thickness and diffraction contrast). It also gives selected area electron diffraction patterns. Resolution about 0.1 to 0.2 nm, so atomic lattices can be seen. Differences from SEM: TEM uses transmitted electrons and shows internal structure; SEM uses secondary electrons from the surface and shows morphology. TEM needs very thin samples and higher voltage; SEM takes bulk samples. TEM image is 2D projection; SEM gives 3D-like surface view. TEM has higher resolution and magnification.

Q6. With a neat diagram explain the working of an Atomic Force Microscope. (6 marks)

Diagram: laser, cantilever with tip, sample on piezo scanner, split photodiode, feedback controller, computer. Working: the tip senses interatomic forces; cantilever deflection follows Hooke's law; the laser spot on the photodiode measures deflection; feedback keeps force constant by moving the piezo in z; recorded z versus x, y gives topography. Modes: contact, non-contact, tapping. Advantages: atomic scale vertical resolution, works on insulators and biological samples in air or liquid, measures force. Limitations: slow, small area, tip artefacts.

Q7. Write short notes on (a) nanomaterials in toxic gas sensing (b) gas sensing capacitors. (6 marks)

(a) Nanostructured SnO2, ZnO, WO3, CNT or graphene films act as chemiresistors. Adsorbed oxygen traps electrons; reducing gases such as CO, H2S, NH3 and LPG react with it and release electrons, lowering resistance, while NO2 raises it. Large surface area and grain size comparable to the depletion layer give high sensitivity at ppm level; heating and noble metal doping improve speed and selectivity. Uses: gas leak alarms, industrial safety, air quality. (b) A gas-sensitive porous dielectric between (often interdigitated) electrodes changes its permittivity when gas or water molecules adsorb, changing \(C = \varepsilon_0\varepsilon_rA/d\); the change is read by an oscillator or capacitance circuit. Low power, simple; humidity sensors are the best known, CO2 and VOC sensors also exist.

Q8. Explain the steps of photolithography. (5 marks)

Clean wafer and grow oxide; spin coat photoresist; soft bake; align mask and expose to UV; develop (positive resist: exposed areas removed; negative: unexposed areas removed); hard bake; etch exposed oxide; strip resist. Resolution is limited by wavelength, so DUV (193 nm) and EUV (13.5 nm) sources are used for nanoscale chips; electron beam and nanoimprint lithography are alternatives for very small features.

Exam tips

  • Draw labelled block diagrams of SEM, TEM and AFM; diagrams carry a large share of marks.
  • A three-column comparison of SEM, TEM and AFM is a quick 5-mark answer.
  • Use S/V = 3/r with a numerical illustration to support the surface to volume answer.
  • Link applications to properties: high surface area for sensors and purification, quantum confinement for optical uses.
  • Remember the dates and names: Feynman 1959, Taniguchi 1974, AFM 1986.

FAQs

Why can an electron microscope see things an optical microscope cannot?

Resolution is limited to roughly half the wavelength used. Visible light is 400 to 700 nm, while electrons accelerated through kilovolts have wavelengths of a few picometres, so far smaller details can be resolved.

Is AFM an electron microscope?

No. It is a scanning probe microscope; it uses a mechanical tip and a laser to measure forces and needs no electron beam or vacuum.

Are nanoparticles harmful?

Some can be. Their small size lets them enter cells and their high reactivity can cause damage, so their safety is studied (nanotoxicology) and their release into the environment is controlled.

What is the difference between top-down and bottom-up fabrication?

Top-down carves nanostructures out of bulk material, as in lithography and ball milling. Bottom-up builds them from atoms and molecules, as in chemical vapour deposition, sol-gel synthesis and self-assembly.

These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Physics of Measurements and Sensors) and were prepared with AI help and checked.

More in Physics of Measurements and Sensors

See all →