Skip to content
doubtly

Transducers Notes FE Sem 2 Measurements and Sensors | MU

Doubtly 16 min read Updated 27 Oct 2026 Save WhatsApp Save as PDF
On this page

A transducer is the bridge between the physical world and an electrical circuit: it turns a displacement, force, temperature or light intensity into a voltage, resistance or inductance that we can amplify, display and record. This module of Physics of Measurements and Sensors (BSC2023, FE Semester 2) explains how transducers are classified, what new kinds (solid state, optical, piezoelectric) have been developed, and how the most common ones work: the resistive potentiometer, the strain gauge, the resistance temperature transducer, the inductive LVDT and the thermal photodetectors used in optical measurement. It maps to CO3 (examine the use of appropriate transducers for an application). Expect a working-principle question with a diagram and a short numerical on gauge factor or RTD resistance.

Summary

What a transducer is: A transducer converts energy or information from one form into another. In instrumentation it usually means a device that converts a non-electrical physical quantity (the measurand) into a proportional electrical signal. A sensor is the element that responds to the measurand; the transducer includes the sensor plus whatever converts its response into a usable output. In a load cell, for example, the steel element deflects under force (primary sensing) and the strain gauges bonded to it convert the strain into a resistance change (secondary transduction).

Classification by function: (1) Primary and secondary transducers: the primary transducer senses the measurand and converts it into an intermediate quantity such as displacement (a Bourdon tube converts pressure into displacement); the secondary transducer converts that into an electrical signal (an LVDT converts the displacement into voltage). (2) Active and passive transducers: active (self-generating) transducers produce their own electrical output from the measurand, without external power, for example thermocouples, piezoelectric crystals, photovoltaic cells and tachogenerators; passive transducers change an electrical parameter (R, L or C) and need an external excitation supply to give an output, for example potentiometers, strain gauges, RTDs, thermistors, LVDTs and capacitive sensors. (3) Transducers and inverse transducers: a transducer converts a non-electrical quantity into an electrical one; an inverse transducer converts an electrical quantity into a non-electrical one, for example a loudspeaker, a piezoelectric actuator or a moving coil meter.

Classification by performance: Transducers are compared and selected on their performance characteristics. Static characteristics: range and span, accuracy, sensitivity (output per unit input), linearity (closeness of the input-output curve to a straight line), resolution, threshold, hysteresis, repeatability and drift. Dynamic characteristics: speed of response, time constant, frequency response (bandwidth), fidelity and dynamic error. Other performance factors are loading effect on the measurand, output impedance, ruggedness, size, power requirement and cost. Thus one speaks of high-sensitivity transducers, linear transducers, fast-response transducers and so on.

Classification by output: (1) Analog transducers give a continuous output proportional to the input (LVDT, strain gauge, thermocouple). (2) Digital transducers give output in discrete steps or pulses (shaft encoders, digital tachometers, counters). Transducers are also grouped by the electrical parameter that carries the output: resistive (potentiometer, strain gauge, RTD, thermistor, photoconductive cell), inductive (LVDT, variable reluctance pick-ups), capacitive (variable gap or area, humidity sensors), voltage or charge generating (thermocouple, piezoelectric, photovoltaic) and frequency output transducers.

Developments in transducer technology: Solid state transducers use semiconductor effects and are made with integrated circuit technology. Examples are semiconductor (piezoresistive) strain gauges with gauge factors of about 100 or more, silicon pressure sensors with diffused piezoresistors on a thin diaphragm, Hall effect sensors, integrated temperature sensors, photodiodes and phototransistors, and MEMS accelerometers. They are small, cheap in large volume, can have built-in signal conditioning, and have no moving parts, but are often temperature sensitive. Optical transducers use light as the sensing medium: photoemissive, photoconductive and photovoltaic cells, optical encoders that count slits on a disc, and fibre optic sensors in which strain, temperature or pressure change the intensity, phase or wavelength of light in a fibre. They are immune to electromagnetic interference and safe in explosive areas. Piezoelectric transducers use crystals (quartz) or ceramics (PZT, lead zirconate titanate) that generate charge when stressed; they are active, rugged and suited to dynamic measurements of force, pressure, acceleration and vibration, but not to static quantities because the charge leaks away.

Resistive transducers: Their resistance \(R = \rho L/A\) is changed by the measurand through length, area or resistivity. (a) Potentiometer: a resistance element (wire-wound, cermet or conductive plastic track) with a sliding contact (wiper) attached to the moving object. For a linear pot of total length L and resistance \(R_p\) excited by \(E_i\), a wiper displacement x gives \(E_o = E_i x/L\) with no load. Rotary pots measure angle. When a meter of resistance \(R_m\) is connected, it loads the pot and the output becomes non-linear, \(E_o/E_i = k/[1 + k(1-k)R_p/R_m]\) with k = x/L; to keep this loading error small, \(R_m\) should be at least ten times \(R_p\). Wire-wound pots have finite resolution (one turn of wire), wear and noise, but are simple, cheap and give large output. (b) Strain gauge: a fine wire or foil grid bonded to the surface of a member. When the member is strained, the gauge length increases, its cross-section decreases (Poisson effect) and its resistivity changes (piezoresistance), so its resistance changes. The gauge factor \(G = (\Delta R/R)/\varepsilon = 1 + 2\nu + (\Delta\rho/\rho)/\varepsilon\), about 2 for metal foil gauges (constantan) and roughly 50 to 200 for semiconductor gauges. Because \(\Delta R\) is tiny, gauges are used in a Wheatstone bridge, with a dummy gauge for temperature compensation. Applications: load cells, pressure transducers, torque and stress analysis. (c) Resistive temperature transducers: metals such as platinum, nickel and copper increase their resistance with temperature, \(R_T = R_0(1 + \alpha T)\) approximately; platinum (α ≈ 0.00385 per °C, Pt-100 has 100 Ω at 0 °C) is the standard because it is stable, linear and usable from about −200 to +850 °C. Thermistors are semiconductor resistors with a large negative (or positive) temperature coefficient.

Inductive transducer, LVDT: The linear variable differential transformer has one primary winding and two identical secondary windings placed symmetrically on either side, on a hollow former, with a movable soft iron (ferromagnetic) core attached to the object. The primary is excited by AC (typically 1 to 10 kHz). The secondaries are connected in series opposition, so the output \(E_o = E_{s1} - E_{s2}\). At the central (null) position the core links both secondaries equally, \(E_{s1} = E_{s2}\), and the output is zero (in practice a small residual null voltage). When the core moves one way, \(E_{s1}\) increases and \(E_{s2}\) decreases, so the output increases in proportion to displacement and is in phase with the primary; moving the other way gives an output in antiphase. The magnitude gives the amount and the phase gives the direction of displacement. It is linear over a range of about ±(1 to 250) mm depending on design, frictionless (core does not touch coils), has infinite resolution, high sensitivity and long life. Disadvantages: it needs AC excitation and a phase-sensitive demodulator, is affected by stray magnetic fields and vibration, and the core mass adds to dynamic load.

Optical measurement systems, thermal photodetectors: Photodetectors are either photon (quantum) detectors, which respond to individual photons by releasing electrons (photodiodes, photomultipliers, photoconductive cells), or thermal detectors, which absorb radiation, warm up and measure the rise in temperature. Thermal detectors respond to all wavelengths equally (flat spectral response from ultraviolet to far infrared), need no cooling, but are slower and less sensitive. Types: (1) Thermocouple and thermopile: a blackened junction absorbs radiation and its temperature rise produces a Seebeck emf; many junctions in series make a thermopile with larger output (used in radiation pyrometers and IR thermometers). (2) Bolometer: a thin blackened metal strip or semiconductor (thermistor bolometer) whose resistance changes with temperature, used in a bridge; microbolometer arrays are used in thermal cameras. (3) Pyroelectric detector: a crystal such as lithium tantalate or triglycine sulphate whose spontaneous polarisation changes with temperature, giving a current proportional to the rate of change of temperature; it responds only to changing (chopped or moving) radiation, as in PIR motion sensors. (4) Golay cell: radiation heats gas in a small chamber, the gas expands and deflects a flexible mirror membrane, detected optically.

Mind map

Transducers

  • By function
    • Primary and secondary
    • Active and passive
    • Transducer and inverse transducer
  • By performance
    • Static: accuracy, sensitivity, linearity, hysteresis
    • Dynamic: speed of response, bandwidth
  • By output
    • Analog and digital
    • R, L, C, voltage, frequency
  • New technology
    • Solid state, MEMS
    • Optical, fibre optic
    • Piezoelectric
  • Resistive
    • Potentiometer, loading
    • Strain gauge, G = (ΔR/R)/ε
    • RTD, Pt-100
  • Inductive
    • LVDT: magnitude and phase
  • Thermal photodetectors
    • Thermopile, bolometer
    • Pyroelectric, Golay cell

Deriving the gauge factor of a strain gauge

  1. A wire of length L, area A and resistivity ρ has resistance \(R = \rho L/A\).
  2. Take logarithms and differentiate: \(\dfrac{dR}{R} = \dfrac{d\rho}{\rho} + \dfrac{dL}{L} - \dfrac{dA}{A}\).
  3. For a circular wire of diameter D, \(A = \pi D^2/4\), so \(dA/A = 2\,dD/D\).
  4. Poisson's ratio: \(dD/D = -\nu\,dL/L = -\nu\varepsilon\), where \(\varepsilon = dL/L\) is the longitudinal strain.
  5. So \(\dfrac{dR}{R} = \dfrac{d\rho}{\rho} + \varepsilon + 2\nu\varepsilon\).
  6. Divide by ε: gauge factor \(G = \dfrac{dR/R}{\varepsilon} = 1 + 2\nu + \dfrac{d\rho/\rho}{\varepsilon}\).
  7. The first two terms are the dimensional effect (about 1.6 for ν = 0.3); the last is the piezoresistive effect, small in metals (G ≈ 2) and dominant in semiconductors (G ≈ 100 or more).

LVDT working at a glance

Core positionSecondary voltagesOutput
At centre (null)\(E_{s1} = E_{s2}\)Zero (small residual voltage)
Moved towards S1\(E_{s1} > E_{s2}\)Proportional to displacement, in phase with primary
Moved towards S2\(E_{s2} > E_{s1}\)Proportional to displacement, 180° out of phase
Beyond linear rangeCoupling no longer linearOutput curve bends, not used

Important definitions

TermMeaning
TransducerDevice that converts a physical quantity into another form, usually an electrical signal.
Primary transducerThe element that directly senses the measurand and converts it to an intermediate quantity.
Secondary transducerConverts the output of the primary transducer into an electrical signal.
Active transducerGenerates its own electrical output without external power (thermocouple, piezoelectric crystal).
Passive transducerChanges R, L or C and needs external excitation (strain gauge, LVDT).
Inverse transducerConverts an electrical signal into a non-electrical quantity (loudspeaker, piezo actuator).
Gauge factorFractional change of resistance per unit strain, \(G = (\Delta R/R)/\varepsilon\).
Piezoresistive effectChange in resistivity of a material when it is strained.
Loading effectChange in a transducer's output caused by the measuring circuit drawing current from it.
Null position (LVDT)Central core position at which the output is zero.
Thermal detectorRadiation detector that responds to the heating effect of absorbed radiation.
BolometerThermal detector whose resistance changes with absorbed radiation.

Formulas

FormulaMeaning
\( R = \dfrac{\rho L}{A} \)Resistance of a conductor.
\( E_o = E_i\,\dfrac{x}{L} \)Unloaded linear potentiometer output.
\( \dfrac{E_o}{E_i} = \dfrac{k}{1 + k(1-k)R_p/R_m} \)Loaded potentiometer, k = x/L, meter resistance \(R_m\).
\( G = \dfrac{\Delta R/R}{\varepsilon} = 1 + 2\nu + \dfrac{\Delta\rho/\rho}{\varepsilon} \)Gauge factor of a strain gauge.
\( \varepsilon = \dfrac{\sigma}{E} \)Strain from stress σ and Young's modulus E (Hooke's law).
\( V_o \approx \dfrac{V_s\,G\,\varepsilon}{4} \)Output of a quarter bridge with one active gauge.
\( R_T = R_0(1 + \alpha T) \)Resistance thermometer (approximately linear).
\( E_o = E_{s1} - E_{s2} = S\,x \)LVDT output; S is sensitivity (mV/mm) and x displacement.

Key points to remember

  • Active: thermocouple, piezoelectric, photovoltaic, tachogenerator. Passive: potentiometer, strain gauge, RTD, thermistor, LVDT, capacitive.
  • Bourdon tube (primary) plus LVDT (secondary) is the standard example of primary and secondary transducers.
  • Use a meter resistance at least 10 times the pot resistance to limit loading error.
  • Metal strain gauge G ≈ 2; semiconductor gauge G ≈ 100 or more but more temperature sensitive.
  • Strain gauges are read in a Wheatstone bridge with temperature compensation (dummy gauge).
  • Pt-100: 100 Ω at 0 °C, about 138.5 Ω at 100 °C (α = 0.00385 per °C).
  • LVDT: magnitude of output gives displacement, phase gives direction; frictionless and infinite resolution.
  • Piezoelectric transducers measure dynamic, not static, quantities.
  • Thermal photodetectors have flat spectral response but slow response; photon detectors are fast but wavelength selective.

Solved examples

Example 1. A 120 Ω strain gauge shows a resistance change of 0.24 Ω when the strain is \(1\times10^{-3}\). Find the gauge factor.

\(G = (\Delta R/R)/\varepsilon = (0.24/120)/10^{-3} = 0.002/0.001 = 2.0\).

Example 2. A steel bar (E = 200 GPa) is stressed to 100 MPa. A 120 Ω gauge of G = 2.1 is bonded on it. Find the change in resistance.

Strain \(\varepsilon = \sigma/E = 100\times10^6/200\times10^9 = 5\times10^{-4}\) (500 microstrain). \(\Delta R = GR\varepsilon = 2.1\times120\times5\times10^{-4} = 0.126\) Ω. Such a small change is why a bridge is needed.

Example 3. A quarter bridge with a gauge of G = 2 is excited by 10 V. Find the output for 500 microstrain.

\(V_o \approx V_sG\varepsilon/4 = 10\times2\times500\times10^{-6}/4 = 2.5\times10^{-3}\) V = 2.5 mV.

Example 4. A Pt-100 (α = 0.00385 /°C) is at 150 °C. Find its resistance. What temperature corresponds to 138.5 Ω?

\(R = 100(1 + 0.00385\times150) = 100\times1.5775 = 157.75\) Ω. For 138.5 Ω: \(T = (138.5/100 - 1)/0.00385 = 0.385/0.00385 = 100\) °C.

Example 5. A 100 mm linear potentiometer is excited by 10 V. Find the output when the wiper is at 30 mm. If the 1 kΩ pot at mid-position is loaded by a 10 kΩ meter, find the output ratio and loading error.

Unloaded: \(E_o = 10\times30/100 = 3.0\) V. Loaded at k = 0.5: \(E_o/E_i = 0.5/[1 + 0.5\times0.5\times(1000/10000)] = 0.5/1.025 = 0.4878\). Ideal 0.5, so the error is 0.0122 of \(E_i\), that is 0.122 V on 10 V excitation, or 2.4 percent of the reading.

Example 6. An LVDT gives 0.45 V for a displacement of 1.5 mm. Find its sensitivity and the displacement when the output is 2.7 V.

\(S = 0.45/1.5 = 0.3\) V/mm. Displacement \(= 2.7/0.3 = 9.0\) mm (assuming it is within the linear range).

Important questions and answers

Q1. Classify transducers on the basis of function, performance and output. (6 marks)

By function: primary and secondary (Bourdon tube and LVDT in a pressure gauge); active and passive (thermocouple versus strain gauge); transducer and inverse transducer (microphone versus loudspeaker). By performance: according to static characteristics (accuracy, sensitivity, linearity, resolution, hysteresis, repeatability, drift) and dynamic characteristics (speed of response, time constant, frequency range), so transducers are chosen as high sensitivity, linear, fast response and so on for a job. By output: analog (continuous output, LVDT, thermocouple) and digital (pulses or codes, optical shaft encoder); also by the electrical output parameter: resistive, inductive, capacitive, voltage or charge generating, frequency output.

Q2. Differentiate between active and passive transducers. (3 marks)

Active transducers generate an electrical output directly from the measurand energy and need no external power; examples: thermocouple, piezoelectric crystal, photovoltaic cell, tachogenerator. Passive transducers change a circuit parameter (resistance, inductance or capacitance) and need an external excitation source to produce an output; examples: potentiometer, strain gauge, RTD, thermistor, LVDT, capacitive sensor. Active transducers are simpler electrically; passive ones often give larger, controllable output.

Q3. What is a strain gauge? Derive the expression for gauge factor. (6 marks)

A strain gauge is a resistive transducer made of a fine wire or foil grid on an insulating backing, bonded to a surface so that it strains with it. Derivation: see the flow above, giving \(G = 1 + 2\nu + (\Delta\rho/\rho)/\varepsilon\). For metals, ν ≈ 0.3 so the dimensional part is 1.6 and the total is about 2; for semiconductors the resistivity term dominates. Gauges are connected in a Wheatstone bridge; a dummy gauge in the adjacent arm, unstrained but at the same temperature, cancels temperature effects. Uses: load cells, pressure cells, torque meters, experimental stress analysis.

Q4. Explain the construction and working of an LVDT with a diagram and output characteristic. (6 marks)

Construction: a primary coil at the centre and two identical secondary coils S1 and S2 on either side, wound on a non-magnetic former; a soft iron core attached to a non-magnetic rod moves inside, connected to the object. Working: AC excitation of the primary induces voltages in S1 and S2; the secondaries are in series opposition so \(E_o = E_{s1} - E_{s2}\). At null, \(E_o = 0\). Displacement to one side increases one secondary voltage and decreases the other, so \(E_o\) rises linearly with displacement; the phase reverses when the core crosses null, which gives direction. Output characteristic: V-shaped magnitude plot with linear arms and phase jump of 180° at null. Advantages: frictionless, high resolution, linear, rugged, high output. Disadvantages: AC supply needed, sensitive to stray fields and temperature, residual null voltage. Uses: displacement, and with a primary element, force, pressure and level.

Q5. Explain the potentiometer as a displacement transducer. What is loading effect? (5 marks)

A potentiometer has a resistive track and a wiper linked to the moving object; the supply \(E_i\) is applied across the track and output is taken between the wiper and one end. For a linear translational pot, \(E_o = E_ix/L\); for a rotary pot, \(E_o = E_i\theta/\theta_{max}\). Loading: when a meter of finite resistance \(R_m\) is connected, it draws current and appears in parallel with the lower part of the track, so the output falls below the ideal value: \(E_o/E_i = k/[1 + k(1-k)R_p/R_m]\). The error is zero at the ends and maximum near k = 2/3. It is reduced by making \(R_m \gg R_p\). Merits: cheap, simple, large output. Demerits: wear, friction, noise and limited resolution.

Q6. Write a note on thermal photodetectors. (5 marks)

Thermal photodetectors sense radiation by its heating effect. A blackened absorber converts incident radiation of any wavelength into heat; the resulting temperature rise is measured. Thermopile: series thermocouples with hot junctions on the absorber give an emf proportional to the radiation power; used in IR thermometers. Bolometer: absorber whose resistance changes with temperature, used in a bridge; microbolometer arrays form thermal camera images. Pyroelectric detector: change of temperature changes the crystal's polarisation and produces a current proportional to dT/dt; used with a chopper or for moving targets (PIR intruder alarms). Golay cell: gas expansion deflects a mirror membrane. Features: broad, flat spectral response, operate at room temperature, but slower response and lower sensitivity than photon detectors.

Q7. Write a note on developments in transducer technology. (5 marks)

Solid state: semiconductor and MEMS devices (piezoresistive pressure sensors, Hall sensors, integrated temperature sensors, accelerometers) that are tiny, cheap and can include amplifiers and digital output. Optical: photodiodes, encoders and fibre optic sensors that are immune to electrical noise and suitable for hazardous and remote locations. Piezoelectric: quartz and PZT elements for dynamic force, pressure, acceleration and ultrasonic generation; self-generating, rugged, wide frequency range. The overall trend is towards smaller, smarter (with built-in processing and digital interfaces) and lower power transducers.

Exam tips

  • Give one example for every class of transducer; marks are lost for bare definitions.
  • The gauge factor derivation is a frequent 5 to 6 mark question; write each step clearly.
  • Draw the LVDT with three coils, core and series opposition connection, and its V-shaped output graph.
  • In strain gauge numericals convert microstrain (με) to plain strain by multiplying by 10^-6.
  • Mention temperature compensation for strain gauges and RTDs.
  • Distinguish thermal from photon detectors in one line each.

FAQs

Is a sensor the same as a transducer?

They are often used interchangeably. Strictly, the sensor responds to the physical quantity and the transducer converts energy from one form to another; most practical sensors include a transducing element.

Why is the LVDT called differential?

Because its output is the difference of the voltages of two secondary coils connected in opposition, which gives zero at the centre and a signed output on either side.

Why are semiconductor strain gauges not used everywhere if their gauge factor is so high?

Their output is less linear and changes strongly with temperature, and they are more fragile. Metal foil gauges are stable and easy to compensate.

Can a piezoelectric transducer measure a steady weight?

No. The charge produced by a constant force leaks away through the circuit resistance, so the output decays. Piezo devices suit changing forces and vibrations.

These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Physics of Measurements and Sensors) and were prepared with AI help and checked.

More in Physics of Measurements and Sensors

See all →