Skip to content
doubtly

1 answer

Here is the full board-exam set for HSC Physics Chapter 1: Rotational Dynamics: the important questions with short answers and every formula you need. Learn these and you can attempt any question from this chapter.

1. Formulas to remember

TopicFormula
Centripetal forceF = mv²/r = mω²r
Banked road (no friction)tan θ = v²/(rg), so v = √(rg tan θ)
Banked road (with friction μ)vmax = √[rg (μ + tan θ)/(1 − μ tan θ)]
Unbanked road (friction only)vmax = √(μrg)
Vertical circle: minimum speed at topvtop = √(rg)
Vertical circle: minimum speed at bottomvbottom = √(5rg)
Vertical circle: minimum speed at the horizontal positionvmid = √(3rg)
Conical pendulum periodT = 2π√(L cos θ / g)
Moment of inertiaI = Σmr² = MK² (K = radius of gyration)
Parallel axis theoremIO = IC + Mh²
Perpendicular axis theorem (laminar body)Iz = Ix + Iy
Angular momentumL = Iω
Torqueτ = Iα = dL/dt
Conservation of angular momentumI1ω1 = I2ω2 (when external torque = 0)
Rotational kinetic energyE = ½Iω²
Rolling kinetic energyE = ½mv²(1 + K²/R²)
Acceleration of a body rolling down an inclinea = g sin θ / (1 + K²/R²)

Moments of inertia of common bodies (about the axis through the centre)

BodyAxisIK²/R²
Thin ringPerpendicular to planeMR²1
DiscPerpendicular to plane½MR²½
Solid sphereDiameter(2/5)MR²2/5
Hollow sphere (thin shell)Diameter(2/3)MR²2/3
Thin rod (length L)Perpendicular, through centreML²/12—

2. Important questions with answers

Q1. What is a banked road? Why is a road banked?

Raising the outer edge of a curved road above the inner edge is called banking. On a banked road, the horizontal component of the normal reaction (N sin θ) provides the centripetal force needed for turning. So a vehicle can take the turn safely without depending only on friction, which reduces wear of tyres and the chance of skidding.

Q2. Derive the expression for the most safe speed on a banked road (no friction).

Forces on the vehicle: weight mg (downward) and normal reaction N (perpendicular to the road).

  • Vertical: N cos θ = mg … (1)
  • Horizontal (centripetal): N sin θ = mv²/r … (2)

Dividing (2) by (1): tan θ = v²/(rg), so v = √(rg tan θ). This speed does not depend on the mass of the vehicle.

Q3. Why does a two-wheeler rider lean while turning on an unbanked road?

On an unbanked road, friction provides the centripetal force. Friction acts at the tyres, so it produces a torque about the centre of mass that would topple the rider outward. By leaning inward at angle θ with the vertical, the normal reaction and friction together pass through the centre of mass and there is no toppling torque. The angle is given by tan θ = v²/(rg).

Q4. Derive the minimum speeds at different positions in a vertical circle.

At the top, for minimum speed the tension becomes zero, so the weight alone gives the centripetal force: mg = mvtop²/r, so vtop = √(rg).

Using conservation of energy between top and bottom (height difference 2r):

½mvbottom² = ½mvtop² + mg(2r) → vbottom² = rg + 4rg, so vbottom = √(5rg).

At the horizontal position (height r): vmid² = rg + 2rg, so vmid = √(3rg).

Q5. Define moment of inertia. State its SI unit and dimensions.

The moment of inertia of a body about an axis is the sum of the products of the mass of each particle and the square of its perpendicular distance from the axis: I = Σmr². It is the rotational analogue of mass. SI unit: kg m². Dimensions: [M1L2T0].

Q6. What is radius of gyration? Why is it useful?

The radius of gyration (K) is the distance from the axis at which the whole mass of the body could be concentrated so that its moment of inertia stays the same: I = MK², so K = √(I/M). It is useful because it lets us compare how mass is distributed in different bodies about an axis, independent of their total mass. A larger K means the mass is farther from the axis.

Q7. State and prove the theorem of parallel axes.

Statement: The moment of inertia of a body about any axis is equal to the sum of its moment of inertia about a parallel axis through its centre of mass and the product of its mass and the square of the distance between the two axes: IO = IC + Mh².

Proof: Take a particle of mass dm at distance x from the axis through the centre of mass C. Its distance from the parallel axis through O is (x + h).

IO = ∫(x + h)² dm = ∫x² dm + 2h∫x dm + h²∫dm

∫x² dm = IC; ∫x dm = 0 (because C is the centre of mass); ∫dm = M.

So IO = IC + Mh².

Q8. State and prove the theorem of perpendicular axes.

Statement: The moment of inertia of a plane (laminar) body about an axis perpendicular to its plane equals the sum of its moments of inertia about two mutually perpendicular axes in its plane that meet at the same point: Iz = Ix + Iy.

Proof: For a particle of mass dm at (x, y) in the plane, its distance from the z-axis is r, with r² = x² + y².

Iz = ∫r² dm = ∫(x² + y²) dm = ∫x² dm + ∫y² dm = Iy + Ix.

Q9. Derive the expression that relates angular momentum with angular velocity.

A particle of mass m at distance r from the axis has linear speed v = rω, so its angular momentum is mvr = mr²ω. For the whole rigid body, L = Σmiri²ω = (Σmiri²)ω, so L = Iω.

Q10. State and explain the principle of conservation of angular momentum.

Statement: If the resultant external torque on a body is zero, its total angular momentum stays constant.

Since τ = dL/dt, if τ = 0 then L = Iω = constant, so I1ω1 = I2ω2.

Examples:

  • A ballet dancer or ice skater pulls in her arms: I decreases, so ω increases (she spins faster).
  • A diver tucks his body during a dive: I decreases and he can do more somersaults.
  • A person on a rotating stool stretches his arms out: he slows down.

Q11. Derive the expression for the kinetic energy of a rolling body.

A rolling body has both translational and rotational kinetic energy:

E = ½mv² + ½Iω². With I = mK² and ω = v/R:

E = ½mv² + ½mK²(v²/R²) = ½mv²(1 + K²/R²).

Q12. Derive the acceleration of a body rolling down an inclined plane.

When the body rolls down a height h, loss of potential energy = gain of kinetic energy:

mgh = ½mv²(1 + K²/R²), so v² = 2gh / (1 + K²/R²).

With h = s sin θ and v² = 2as: a = g sin θ / (1 + K²/R²).

So a solid sphere (K²/R² = 2/5) reaches the bottom first, then a disc (½), then a hollow sphere (2/3), and a ring (1) is the slowest.

3. Solved numericals and more practice

All solved questions, board-paper questions and a chapter test: Rotational Dynamics chapter page. Full board papers with solutions: HSC Physics March 2026, March 2025, March 2024.

If you have a specific question from your textbook or a numerical you are stuck on, post it with a photo and we will solve it step by step.

Doubtly AI · 19 Nov 2026 AI-verified · Nov 2026 Report
Was this answer helpful?

Practise this chapter

Rotational Dynamics

Take a 10-question test new questions each time · marked instantly · free

Your answer

Log in or create a free account to answer this question.