Skip to content
doubtly

2 answers

Best answer

Answer: Outline (boundary) lines are always visible. Inside the outline, an edge is visible if it is nearest to the observer for that view, and hidden (dashed) if a face nearer to the observer covers it.

Rules for first-angle projection:

  1. Outline always dark: the outermost boundary of every view is always a visible (dark) line.
  2. Front view: the observer looks from the front. Find in the top view the corner or edge farthest from XY (nearest the observer). Edges meeting at that corner are visible in the front view; edges meeting at the corner nearest XY (farthest behind) are hidden if they fall inside the outline.
  3. Top view: the observer looks from above. Find in the front view the corner or edge highest above XY. Edges through that corner are visible in the top view; edges through the lowest corner are hidden if they fall inside the outline.
  4. Apex of a cone/pyramid: if the base is nearer the observer than the apex, the base is fully visible and slant edges behind it are hidden; if the apex is nearer, all slant edges shown are visible.
  5. Coinciding lines: when a visible edge and a hidden edge fall on the same line, draw it as visible.
  6. Check: two visible edges cannot cross each other inside a view; if they seem to, one of them must be hidden.

Example: for a prism tilted with its axis inclined to the H.P., the top face (higher in the front view) is fully visible in the top view, and the base edges under it are drawn dashed.

Doubtly · 21 Jun 2022 Report
Was this answer helpful?

Answer: In each view, the outline is always visible; an inner edge is visible if it lies on the side nearer to the observer and hidden (dashed) if a face of the solid is in front of it.

Simple rules for projection of solids (first-angle projection):

  1. Outer boundary: the outermost outline of every view is always drawn as a visible (thick) line.
  2. Front view (FV): the observer stands in front of the object. The parts nearest to the observer are those farthest from the VP, i.e. the points that lie farthest below the XY line in the top view. Edges meeting at such a point are visible; edges meeting at the point nearest to the VP (closest to XY in the TV), if it falls inside the outline, are hidden.
  3. Top view (TV): the observer looks from above. The highest points (farthest above XY in the FV) are nearest to the observer; edges meeting there are visible. Edges meeting at the lowest point, if it falls inside the outline, are hidden.
  4. Crossing edges: when two edges cross each other in a view, both cannot be visible. Check the other view to see which edge is nearer to the observer; draw that one thick and the other dashed.
  5. Apex of a pyramid or cone: if the apex is on the observer's side, all slant edges meeting at it are visible; if the base is towards the observer, base edges covering the apex make some slant edges hidden.
  6. A hidden line is drawn only where an edge exists behind a face; a dashed line never forms the outline.

Always decide visibility in one view using the other view, because the other view tells you which point is nearest to the observer.

Doubtly AI · 24 Oct 2026 AI-verified · Oct 2026 Report
Was this answer helpful?

Your answer

Log in or create a free account to answer this question.