#engineering drawing
- A square prism with side of base 40 mm and axis height 60 mm is resting on HP Given Data Side of prism = 40 mm Axis length = 60 mm Resting on one of its corner = HP Axis inclination with HP = 30° 1
- Figure shows 2 views of casting , Draw an isometric view with suitable origin Figure shows 2 views of casting , Draw an isometric view with suitable origin 1
- Trick for Visible (Dark) and Hidden (Dashed) Lines in Projection of Solids Many times students get confused which line to be made dark (visible) and which line to be made dashed (hidden). Video courtesy:: Youtube Fo... 1
- A line AB, 70mm long, has its end A 15mm above HP and 20mm in front of VP. Given Data:- TL = a’b1’ = ab2 = 70 mm a’ (↑) = 10 mm a (→) = 20 mm θ = 30° Φ= 45° 1
- Trick for Visible (Dark) and Hidden (Dashed) Lines in Projection of Solids - Engineering Drawing. Answer: Outline (boundary) lines are always visible. Inside the outline, an edge is visible if it is nearest to the observer for that view,... 2
- Figure shows 2 views of casting , Draw an isometric view with suitable origin Figure shows 2 views of casting , Draw an isometric view with suitable origin 1
- How to draw corner square prism
- Engineering Drawing paper pattern , FE sem 2 Mumbai University Engineering Drawing paper pattern , FE sem 2 Mumbai University 1
- How to draw isometric diagrams in autocad 2007 step 01 : command "snapstyl" step 02 : Enter value ="1" step 03 : for switching dimensions F5 for circle el 2
- A square prism with side of base 40 mm and axis height 60 mm is resting on HP on one of its base corner such that Answer: Solve in two stages: first draw the prism with its axis perpendicular to the H.P. (base on H.P.), then tilt the front view about a b... 1
- A cube 25 mm edge is placed centrally on the top of another square block of 40 mm edge and 15 mm thick. (i) Draw two isometric axes AB and AD of length 40 mm, each making an angle of 30° with the horizontal line. Draw BC and CD parallel to AD a... 1
- The front and top views of a straight line PQ measures 50 mm and 65 mm, respectively. Answer: True length of PQ ≈ 74 mm, θ (with H.P.) ≈ 28.5°, φ (with V.P.) ≈ 47.5°. HT coincides with p (20 mm in front of V.P.); VT is about 1... 1
- Draw the projections of following points on a common reference line keeping the distance between their Answer: Draw the reference line XY and four projectors 30 mm apart. For each point mark the front view (a′, b′ …) from the H.P. distance and... 1
- A line AB, 70mm long, has its end A 15mm above HP and 20mm in front of VP. Answer: Front view a′b′ = 49.5 mm at 45° to XY, top view ab = 60.6 mm at about 54.7° to XY, end projectors 35 mm apart; HT is about 1.2 mm b... 1
- The distance between the end projectors of a line AB is 40 mm. The end point A is 15 mm above HP and 20 m in from
- The F.V. and T.V. of a line AB measures 50 mm and 60 mm respectively. The line is 70 mm long.
- Draw a helix of pitch equal to 70 mm on a cylinder of 60 mm diameter Answer: Divide the circumference and the pitch into the same number of equal parts (say 12) and join the points where the matching projector... 1
- A wheel of 56 mm diameter rolls downwards on avertical wall for half revolution and then on the horizontal floor