Skip to content
doubtly

Kinematics of particle and rigid bodies

19 solved questions 1 note

Chapter test coming soon ← Previous Next chapter →

Every question from past university papers on Kinematics of particle and rigid bodies, newest paper first. Open any question for its full worked answer.

Mumbai University FE Sem 1 Engineering Mechanics (ESC101) Question Paper December 2025

Full paper →
  1. Q.1 (e) The acceleration of the particle is defined by the relation \(a = 25 - 3x^2\ \text{mm/s}^2\). The particle starts with no initial velocity at the position x = 0. Determine the position where the velocity is maximum and the corresponding maximum velocity.

    [The exponent of x is partly obscured in the source scan; it is read as \(x^2\).]

    3 marks · See worked answer →

  2. Q.2 (B) The motion of a particle is defined by the position vector, \(\bar r = 5t\,i + 3t^2\,j\) where ‘r’ is in meters and t is in seconds. At the instant when t = 2 sec, find i) Tangential and normal components of accelerations ii) Radius of curvature.

    8 marks · See worked answer →

  3. Q.3 (B) In the mechanism shown in fig, the angular velocity of link AB is 5 rad/sec anticlockwise. At the instant shown, determine the angular velocity of link BC and velocity of piston C.

    Figure: link AB hangs vertically from a fixed pivot A; AB = 200 mm, rotating at 5 rad/s anticlockwise. Connecting rod BC (mid-point M) runs from B down to the right to piston C, which slides in a vertical guide. C is 450 mm to the right of B and 150 mm below B.

    8 marks · See worked answer →

Mumbai University FE Sem 1 Engineering Mechanics (ESC101) Question Paper June 2025 (KT)

Full paper →
  1. Q.1 (e) The acceleration of a particle in rectilinear motion is given by \(a = 100 - 3x^2\ \text{m/s}^2\). Knowing that at t = 0, v = 0 and x = 0 find the velocity of the particle at x = 8 m.

    3 marks · See worked answer →

  2. Q.2 (B) The position vector of a particle which moves in the X-Y plane is given by \(\bar r = (3t^3 - 4t^2)\,i + (0.5t^4)\,j\) m. Calculate Velocity and acceleration at t = 4 Sec.

    8 marks · See worked answer →

  3. Q.3 (B) Collar B moves up with constant velocity of \(V_B = 2\) m/s. Rod AB is pinned at B. Find the angular velocity of rod AB and velocity of A.

    Figure: collar B slides on a fixed vertical rod. Rod AB of length 1.5 m runs from B down to the left to end A; at B the rod makes 50° with the horizontal. End A slides on an inclined surface rising to the right at 30° to the horizontal (the incline then meets the horizontal ground on which the vertical rod stands).

    8 marks · See worked answer →