Engineering
- How does a Zener diode work as a voltage regulator against changes in input and load? In one line In a Zener shunt regulator, a series resistor drops the extra input voltage while the Zener diode, connected in reverse across t... 1
- How does a light emitting diode produce light, and what decides the colour of an LED? In one line An LED is a forward-biased p-n junction in which electrons recombine with holes and release their energy as photons; the colour... 1
- What is the internal structure of an LED and why does it need a series resistor? In one line An LED is a p-n junction chip with a thin top layer for light to escape, mounted in a reflector cup inside a transparent epoxy l... 1
- How are LEDs used in indicator lamps and seven-segment and dot-matrix displays? In one line LEDs are used as indicator lamps to show the status of a device and are arranged as segments or dot grids to display digits, let... 1
- How are LEDs used for lighting, and why are they replacing incandescent and CFL lamps? In one line White LEDs, usually a blue LED chip coated with yellow phosphor, are used in bulbs, tubes, street lights, vehicles and display b... 1
- What is the structure of a bipolar junction transistor and why are its three regions doped differently? In one line A BJT is a three-layer semiconductor device (n-p-n or p-n-p) with an emitter, a base and a collector forming two p-n junctions;... 1
- How does an NPN transistor work in the active region, and what are alpha and beta? In one line In the active region, the forward-biased emitter-base junction injects electrons into the thin base, almost all of which are swe... 1
- What are the input and output characteristics of a BJT in common emitter configuration? In one line In common emitter (CE) configuration, the input characteristic is I_B versus V_BE at constant V_CE, and the output characteristi... 1
- What is the structure of a junction field effect transistor and how is it different from a BJT? In one line A JFET is a bar of n-type (or p-type) semiconductor forming a channel between source and drain, with heavily doped regions of th... 1
- How does an n-channel JFET operate, and what are pinch-off and its drain characteristics? In one line In an n-channel JFET, a negative gate-source voltage widens the depletion regions and narrows the channel, reducing drain curren... 1
- How is an enhancement MOSFET built, and how does a gate voltage create a conducting channel? In one line An enhancement n-channel MOSFET has n^+ source and drain regions in a p-type substrate and a metal gate insulated by a thin oxid... 1
- How does a common emitter BJT amplifier amplify a small signal, and why is output inverted? In one line A CE amplifier is biased at a Q-point in the active region; a small AC input at the base varies the base current, which varies t... 1
- How does a FET work as an amplifier in the common source configuration? In one line In a common-source FET amplifier, the FET is biased in its saturation (pinch-off) region; a small AC gate voltage varies the dra... 1
- How do BJTs and MOSFETs work as electronic switches between cut-off and saturation? In one line A transistor works as a switch by being driven fully OFF (cut-off, like an open switch) or fully ON (saturation for a BJT, low-r... 1
- How are transistors used in oscillators, and what is the Barkhausen criterion for oscillation? In one line An oscillator is an amplifier (BJT or FET) with positive feedback through a frequency-selective network; it produces a sustained... 1
- What is communication, and what are its main objectives in a professional setting? In one line Communication is the two-way process of sharing information, ideas and feelings through shared symbols so that the receiver unde... 1
- What are Kirchhoff's current law and voltage law, and how do you apply them to a circuit? In one line Kirchhoff's Current Law (KCL) says the total current entering a node equals the total current leaving it, and Kirchhoff's Voltag... 1
- What is the difference between ideal and practical voltage and current sources? In one line An ideal source gives a fixed voltage (or current) no matter what load is connected, while a practical source has internal resis... 1
- How does source transformation convert a voltage source into an equivalent current source? In one line A practical voltage source V with series resistance R can be replaced by a current source I = V/R with the same R in parallel, a... 1
- How do you solve a DC circuit using mesh analysis with mesh currents? In one line Mesh analysis assigns a loop current to each window (mesh) of a planar circuit, writes KVL for every mesh, and solves the result... 1
- How do you solve a DC circuit using nodal analysis with node voltages? In one line Nodal analysis picks one node as the reference (0 V), writes KCL at every other node in terms of unknown node voltages, and solv... 1
- How do star-delta and delta-star transformations simplify resistor networks? In one line Star-delta transformation replaces three resistors connected in a star (Y) with an equivalent set of three in a delta (triangle)... 1
- What does the superposition theorem state and how is it used with multiple sources? In one line In a linear circuit with several independent sources, the current or voltage in any element equals the algebraic sum of the valu... 1
- How does Thevenin's theorem replace a complex network by a single source and resistance? In one line Thevenin's theorem says any linear two-terminal network can be replaced by one voltage source V_th in series with one resistance... 1