Skip to content
doubtly

Renewable Energy Notes FE Sem 2 Environmental Chemistry | MU

Doubtly 16 min read Updated 27 Oct 2026 Save WhatsApp Save as PDF
On this page

India's electricity system crossed a milestone in mid-2025: half of its installed power capacity now comes from non-fossil sources, mainly solar, wind and hydro, with nuclear making up the rest of the non-fossil share. This module of Environmental Chemistry and Non-conventional Energy Sources (BSC2032, FE Semester 2) explains why we need non-conventional (renewable) energy and then looks at six renewable sources: hydro, solar, wind, biomass, tidal and geothermal energy. For each you should know the basic principle, how much is available (especially in India) and the limitations. It maps to CO4 (compare availability, efficiency and environmental impact of non-conventional sources). Expect comparison questions and short notes; simple power calculations help you explain availability.

Summary

Conventional and non-conventional sources: Conventional energy sources are those used on a large scale for a long time: coal, oil, natural gas (fossil fuels), and in many classifications large hydro and nuclear power. Non-conventional sources are those that are being developed more recently on a large scale, are mostly renewable (replenished by nature as fast as we use them) and are cleaner: solar, wind, biomass, small hydro, tidal, wave, geothermal and ocean thermal energy, and hydrogen as an energy carrier. Renewable sources are ultimately driven by the sun (solar, wind, hydro, biomass, waves), the gravitational pull of the moon and sun (tides) or the earth's internal heat (geothermal).

Need for non-conventional energy sources: (1) Depletion of fossil fuels: coal, oil and gas are finite; at current consumption known oil and gas reserves will last only some decades. (2) Rising energy demand: India's population, industrialisation and urbanisation are rapidly increasing demand, and per capita consumption is still well below the world average. (3) Energy security and import bill: India imports most of its crude oil (over 85 percent) and a large share of its gas, which costs foreign exchange and exposes the economy to price shocks. (4) Pollution: burning fossil fuels emits SO2, NOx, particulates and mercury, causing acid rain, smog and lung disease. (5) Climate change: fossil fuels are the largest source of CO2; India has committed to about 500 GW of non-fossil capacity by 2030 and net zero emissions by 2070. (6) Decentralised supply: solar, small hydro and biomass can supply remote villages without long transmission lines. (7) Renewable sources are free and inexhaustible, create local jobs and their costs (especially solar PV) have fallen sharply, making them the cheapest new source of electricity in many places.

Hydro energy: Potential energy of water stored at a height is converted into kinetic energy in a penstock, then into mechanical energy in a turbine and into electricity in a generator. Power \(P = \eta\rho gQH\), where Q is flow (m³/s), H is head (m) and η the overall efficiency (about 0.8 to 0.9). Types: storage (dam), run-of-river and pumped storage (which stores surplus electricity). In India small hydro (up to 25 MW) is classed as renewable by MNRE, and large hydro has also been counted as renewable since 2019. Availability: India's hydro potential is large (well over 100 GW for large plants, mostly in the Himalayan states and the north-east), of which less than half is developed; large hydro installed capacity is roughly 47 to 49 GW (depending on whether pumped storage is counted). Advantages: no fuel cost, no emissions during operation, quick starting (good for peak load), long life, multipurpose dams (irrigation, flood control, water supply). Limitations: high capital cost and long construction time; submergence of forests and villages and displacement of people; effects on aquatic life and silt flow; methane from decaying vegetation in reservoirs; output depends on rainfall; suitable sites are often far from load centres and in seismic zones.

Solar energy: The sun delivers about 1361 W/m² (solar constant) at the top of the atmosphere; on a clear day about 1000 W/m² reaches the ground. India, with about 250 to 300 sunny days a year, receives roughly 4 to 7 kWh/m² per day, and its total annual solar energy incidence is estimated at about 5000 trillion kWh, far more than its total energy use. Conversion routes: (1) solar thermal (flat plate collectors and evacuated tube water heaters, solar cookers, dryers, concentrating solar power plants using parabolic troughs, towers or dishes to raise steam); (2) solar photovoltaic (PV) cells, in which photons with energy above the band gap of a semiconductor (usually silicon) create electron-hole pairs that are separated by a p-n junction to give a DC current; commercial modules are about 18 to 23 percent efficient. India's installed solar capacity grew from a few GW in 2014 to well over 100 GW by 2025, with large parks in Rajasthan, Gujarat, Karnataka and Madhya Pradesh and rooftop schemes such as PM Surya Ghar. Advantages: abundant, free, silent, no emissions during use, modular from watts to gigawatts, low maintenance. Limitations: available only in daytime and reduced by clouds and seasons (intermittent), so storage or backup is needed; low energy density needs large land areas; dust lowers output; initial cost of batteries; module recycling at end of life.

Wind energy: Wind is air in motion caused by uneven heating of the earth by the sun. A wind turbine converts the kinetic energy of wind into mechanical energy of the rotor and then electricity. The power in the wind through a rotor of swept area A is \(P = \tfrac{1}{2}\rho Av^3\), where ρ is air density (about 1.225 kg/m³) and v the wind speed. Since P varies as v³, doubling wind speed gives eight times the power, so siting is crucial. No turbine can extract more than 16/27 (59.3 percent) of this power (the Betz limit); practical machines achieve about 35 to 45 percent. Horizontal axis three-blade turbines dominate; vertical axis types (Darrieus, Savonius) are used for small applications. Availability: good sites need average wind speeds above about 5 to 6 m/s at hub height; in India the best areas are coastal and plateau regions of Tamil Nadu, Gujarat, Maharashtra, Karnataka, Rajasthan, Andhra Pradesh and Madhya Pradesh. India's wind installed capacity is about 50 GW (fourth largest in the world), and the estimated potential at modern hub heights is many hundreds of GW, with offshore potential off Gujarat and Tamil Nadu. Advantages: free, clean, cost competitive, land below can be farmed. Limitations: intermittent and variable, seasonal (strong in the monsoon months), needs grid balancing; noise, visual impact and bird and bat collisions; good sites are limited and often remote; turbines need wind speeds between a cut-in (about 3 to 4 m/s) and cut-out (about 25 m/s) speed.

Biomass energy: Biomass is organic matter of plant or animal origin: wood, crop residues, animal dung, municipal organic waste, sewage and algae. It stores solar energy captured by photosynthesis, \(6CO_2 + 6H_2O \xrightarrow{h\nu} C_6H_{12}O_6 + 6O_2\). Energy is obtained by direct combustion or by conversion to biogas, producer gas, ethanol, biodiesel or charcoal (details in Module 5). It is considered carbon neutral when the biomass is regrown, because the CO2 released equals the CO2 absorbed during growth. Availability: India produces several hundred million tonnes of agricultural residues a year, a large surplus of which is burnt in fields (a cause of winter smog in north India), plus huge amounts of cattle dung; sugar mills use bagasse for cogeneration, and India's ethanol blending programme has raised blending in petrol to about 20 percent. Limitations: low energy density and bulky, so transport and storage are costly; seasonal availability; competition with food and fodder and land for energy crops; indoor air pollution when burnt in traditional stoves; deforestation if over-harvested.

Tidal energy: Tides are the periodic rise and fall of sea level caused by the gravitational pull of the moon and sun; there are usually two high and two low tides each lunar day (about 24 h 50 min). In a tidal barrage, a dam with sluice gates and turbines encloses a bay or estuary; water is let in at high tide and released through turbines at low tide (single or double effect). Tidal stream turbines placed in strong currents work like underwater wind turbines. The energy available per filling or emptying of a basin of area A with tidal range R is about \(E = \tfrac{1}{2}\rho gAR^2\), so a large range is essential (at least about 5 m). Examples: La Rance in France (240 MW, 1966) and Sihwa Lake in South Korea (254 MW). India's best sites are the Gulf of Khambhat and the Gulf of Kutch in Gujarat (tidal ranges up to about 8 to 11 m) and the Sundarbans in West Bengal; the estimated potential is several GW, but no large plant has been built yet. Advantages: highly predictable, no fuel, long life. Limitations: very few suitable sites, very high capital cost, power available only at certain times of day which do not match demand, effects on estuarine ecology, sedimentation and navigation, and corrosion by seawater.

Geothermal energy: Geothermal energy is heat from the earth's interior, produced mainly by the decay of radioactive elements and residual heat. Temperature rises with depth by about 25 to 30 °C per km on average and much more in volcanic and tectonically active areas, where hot water and steam reservoirs, hot springs and geysers occur. Uses: electricity (dry steam, flash steam and binary cycle plants) and direct heating (space heating, greenhouses, drying, bathing); geothermal heat pumps use shallow ground heat for heating and cooling buildings. Countries such as the USA, Indonesia, the Philippines, Turkey, New Zealand, Italy (Larderello, where geothermal electricity was first generated in 1904) and Iceland use it widely. In India about 300 to 400 hot springs are known; promising areas include Puga Valley in Ladakh, Tattapani in Chhattisgarh, Manikaran in Himachal Pradesh, Cambay graben in Gujarat and the west coast of Maharashtra; the estimated potential is around 10 GW, but commercial power production has not started yet. Advantages: available round the clock (base load), small land use, low emissions. Limitations: limited to specific locations; high drilling cost and exploration risk; release of H2S, CO2 and dissolved minerals (silica, boron, arsenic) that cause scaling and pollution; possible land subsidence and induced seismicity; reservoirs can cool if over-exploited.

Mind map

Introduction to Non-conventional Energy Sources

  • Need
    • Fossil fuels finite
    • Demand rising, imports costly
    • Pollution and climate change
    • Rural supply, falling costs
  • Hydro
    • P = ηρgQH
    • Large potential in Himalaya
    • Displacement, ecology
  • Solar
    • About 1000 W/m² at ground
    • Thermal and PV
    • Intermittent, land
  • Wind
    • P = ½ρAv³, Betz 59.3%
    • Coastal and plateau states
    • Variable, noise, birds
  • Biomass
    • Residues, dung, wood, waste
    • Carbon neutral if regrown
    • Bulky, seasonal
  • Tidal
    • E = ½ρgAR²
    • Khambhat, Kutch, Sundarbans
    • Few sites, costly
  • Geothermal
    • Earth's heat, base load
    • Puga, Tattapani
    • Site specific, H2S

Deriving the power in the wind

  1. Consider air of density ρ moving with speed v through a rotor of swept area \(A = \pi D^2/4\).
  2. Volume of air passing per second = Av, so mass flow rate \(\dot{m} = \rho Av\).
  3. Kinetic energy carried per second (power) \(= \tfrac{1}{2}\dot{m}v^2 = \tfrac{1}{2}\rho Av\cdot v^2\).
  4. So the power available in the wind is \(P = \tfrac{1}{2}\rho Av^3\).
  5. A turbine cannot stop the air completely (it must flow away), so it can extract at most \(C_p = 16/27 \approx 0.593\) of this power (Betz limit).
  6. Actual electrical output \(P_e = C_p\cdot\tfrac{1}{2}\rho Av^3\) with \(C_p\) about 0.35 to 0.45 including losses.
  7. Because of the \(v^3\) term, a site with 10 percent higher average wind speed gives about 33 percent more energy.

Comparison of renewable sources

SourceAvailabilityMain advantageMain limitation
HydroRivers with head and flow; seasonalCheap, flexible, storage possibleDams displace people, affect ecology
SolarEverywhere in daytime; strong in IndiaAbundant, modular, low cost nowIntermittent, needs storage and land
WindWindy coastal and plateau sitesLow cost, cleanVariable, site specific
BiomassRural areas, agro industriesCan be stored, dispatchable, uses wasteBulky, seasonal, competes with food
TidalFew coastal sites with large rangePredictableVery costly, few sites
GeothermalVolcanic or tectonic regionsContinuous base loadLocation limited, drilling risk

Important definitions

TermMeaning
Renewable energyEnergy from sources naturally replenished on a human time scale (sun, wind, water, biomass, tides, earth's heat).
Non-conventional energyEnergy sources other than fossil fuels and large-scale traditional sources, mostly renewable and recently developed on a large scale.
Solar constantSolar power received per unit area perpendicular to the sun's rays at the top of the atmosphere at the mean earth-sun distance, about 1361 W/m².
Photovoltaic effectGeneration of voltage and current in a semiconductor junction when light falls on it.
Betz limitMaximum fraction (16/27) of wind power that any turbine can extract.
HeadHeight through which water falls in a hydro plant.
Tidal rangeDifference in water level between high and low tide.
Geothermal gradientRate of increase of temperature with depth in the earth, about 25 to 30 °C per km on average.
Capacity factorActual energy produced in a period divided by the energy if the plant ran at full rated power throughout.
IntermittencyVariation of output with weather and time of day that is not under the operator's control.

Formulas

FormulaMeaning
\( P = \eta\rho gQH \)Hydro power; ρ = 1000 kg/m³, g = 9.81 m/s².
\( P = \tfrac{1}{2}\rho Av^3,\ A = \tfrac{\pi D^2}{4} \)Power in the wind.
\( P_{max} = \tfrac{16}{27}\cdot\tfrac{1}{2}\rho Av^3 \)Betz limit.
\( P_{PV} = \eta\,G\,A \)PV output; G is irradiance (W/m²).
\( E = \tfrac{1}{2}\rho gAR^2 \)Tidal energy per filling or emptying of a basin of area A and range R.
\( CF = \dfrac{E_{actual}}{P_{rated}\times t} \)Capacity factor.

Key points to remember

  • Renewables are driven by the sun, the moon's gravity or the earth's internal heat.
  • India crossed 50 percent non-fossil installed capacity in 2025; targets are about 500 GW non-fossil capacity by 2030 and net zero by 2070.
  • Hydro: P = ηρgQH; clean in operation but large dams have social and ecological costs.
  • Solar: about 1000 W/m² peak at ground; India gets 4 to 7 kWh/m² per day.
  • Wind power ∝ v³; Betz limit 59.3 percent.
  • Biomass is carbon neutral only if replanted; it can be stored, unlike sun and wind.
  • Tidal energy ∝ R²; India's best sites are the Gulfs of Khambhat and Kutch.
  • Geothermal gives continuous power but only at special sites; Puga and Tattapani are India's best known.
  • Solar and wind need storage, grid flexibility and forecasting because they are intermittent.

Solved examples

Example 1. A wind turbine has a rotor diameter of 40 m. Find the power in the wind at 6 m/s and 12 m/s (ρ = 1.225 kg/m³).

\(A = \pi\times20^2 = 1256.6\) m². At 6 m/s: \(P = 0.5\times1.225\times1256.6\times216 = 1.66\times10^5\) W = 166 kW. At 12 m/s: 8 times as much, 1330 kW. Doubling the speed gives eight times the power.

Example 2. For the same turbine at 8 m/s, find the maximum power by the Betz limit and the actual output with \(C_p = 0.4\).

Power in the wind \(= 0.5\times1.225\times1256.6\times512 = 394\) kW. Betz maximum \(= 0.593\times394 = 234\) kW. Actual \(= 0.4\times394 = 158\) kW.

Example 3. A hydro plant has a head of 20 m and a flow of 50 m³/s with overall efficiency 85 percent. Find its power.

\(P = 0.85\times1000\times9.81\times50\times20 = 8.34\times10^6\) W = 8.34 MW.

Example 4. A 1.6 m² PV module of 20 percent efficiency receives 1000 W/m². Find its power and daily energy for 5 peak sun hours.

\(P = 0.2\times1000\times1.6 = 320\) W. Energy \(= 320\times5 = 1600\) Wh = 1.6 kWh per day.

Example 5. A tidal basin of area 10 km² has a range of 5 m. Find the energy available per emptying (ρ = 1025 kg/m³).

\(E = 0.5\times1025\times9.81\times10^7\times5^2 = 1.257\times10^{12}\) J. In MWh: \(1.257\times10^{12}/3.6\times10^9 = 349\) MWh per emptying, before turbine losses.

Important questions and answers

Q1. Explain the need for non-conventional energy sources. (5 marks)

Fossil fuels are finite and being depleted; energy demand is rising fast with population and development; India depends heavily on imported oil and gas, harming energy security and the trade balance; fossil fuel burning causes air pollution (SOx, NOx, PM), acid rain and health damage; CO2 emissions drive climate change and international commitments require cuts; renewables are inexhaustible, widely distributed, suitable for decentralised rural supply, create local jobs and are now cost competitive. Hence a shift towards solar, wind, biomass, small hydro and other renewables is essential for sustainable development.

Q2. Compare conventional and non-conventional energy sources. (5 marks)

Conventional: coal, oil, gas, nuclear (and traditionally large hydro); mostly non-renewable; concentrated, high energy density; centralised large plants; reliable and dispatchable; polluting, with emissions and wastes; fuel costs and imports. Non-conventional: solar, wind, biomass, tidal, geothermal, small hydro; renewable; diffuse, low energy density; modular and decentralised; often intermittent and needing storage; little or no pollution in operation; no fuel cost but higher land requirement and sometimes high capital cost.

Q3. Discuss the availability and limitations of solar and wind energy in India. (6 marks)

Solar: high irradiation (4 to 7 kWh/m²/day, 250 to 300 clear days), very large potential, installed capacity over 100 GW led by Rajasthan and Gujarat, plus rooftop programmes. Limitations: only daytime, clouds and monsoon reduce output, needs storage, large land, dust, module waste. Wind: good resources along the coasts and plateaus of Tamil Nadu, Gujarat, Karnataka, Maharashtra, Rajasthan, Andhra Pradesh and Madhya Pradesh; about 50 GW installed; offshore potential off Gujarat and Tamil Nadu. Limitations: variable and seasonal (peaks in monsoon), P ∝ v³ makes it site sensitive, grid integration challenges, noise, bird hits and land acquisition.

Q4. Write notes on tidal and geothermal energy. (6 marks)

Tidal: gravitational pull of moon and sun; barrage with sluices and bulb turbines or tidal stream turbines; energy ∝ AR²; predictable; examples La Rance and Sihwa; Indian sites Gulf of Khambhat, Gulf of Kutch, Sundarbans; limitations: few sites, high capital cost, intermittent timing, ecological effects. Geothermal: heat from radioactive decay inside the earth; hot water and steam reservoirs tapped by wells; dry steam, flash and binary plants and direct heating; continuous base load; Indian sites Puga, Tattapani, Manikaran, Cambay; limitations: location specific, drilling cost, H2S and mineral pollution, scaling, subsidence.

Q5. What are the advantages and limitations of hydro power? (5 marks)

Advantages: renewable and fuel-free, no emissions in operation, high efficiency (about 90 percent), quick start for peak loads, long life, low running cost, pumped storage provides grid storage, dams give irrigation, drinking water and flood control. Limitations: high initial cost and long gestation; submergence of land and forests and displacement of people; loss of biodiversity, blocked fish migration and silt trapping; methane emissions from reservoirs in the tropics; dependence on monsoon; risk of dam failure and earthquakes in the Himalaya.

Q6. Why is biomass considered a renewable and carbon neutral source? What are its limitations? (5 marks)

Biomass is continuously produced by photosynthesis using solar energy; if harvested sustainably and replanted, the CO2 released on burning or converting it is reabsorbed by new growth, so the net addition of CO2 is nearly zero. It also uses wastes (crop residues, dung, sewage) that would otherwise pollute. Limitations: low energy density, bulky and seasonal supply, collection and transport costs, competition with food and fodder, land and water needs for energy crops, smoke and indoor pollution if burnt inefficiently, deforestation if over-exploited.

Exam tips

  • Give India-specific examples and sites; examiners like Khambhat, Puga, Rajasthan solar parks and Tamil Nadu wind farms.
  • Write the power formula for each source to show understanding of availability.
  • Always pair advantages with limitations in a table.
  • Remember the cube law for wind and the square law for tidal range.
  • Mention storage (batteries, pumped hydro) when discussing solar and wind limitations.

FAQs

Is nuclear energy renewable?

No. Uranium is a finite mineral, so nuclear power is non-renewable, although it is a low-carbon, non-fossil source and counts towards India's non-fossil capacity.

Why does solar power need batteries but hydro does not?

A reservoir stores water that can be released when needed, so hydro is dispatchable. Sunlight cannot be stored as it comes, so batteries, pumped storage or other plants must cover nights and cloudy periods.

Why can't a wind turbine capture all the wind's energy?

If it did, the air would stop behind the rotor and no more air could flow through. The Betz analysis shows the best you can do is slow the air to one third of its speed, capturing 59.3 percent.

Which renewable source is most predictable?

Tidal energy, because tides follow the motion of the moon and sun and can be forecast years ahead. Geothermal is the most continuous.

These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Environmental Chemistry and Non-conventional Energy Sources) and were prepared with AI help and checked.

More in Environmental Chemistry and Non-conventional energy sources

See all →