Waste Management Notes FE Sem 2 Environmental Chemistry | MU
On this page
An Indian city of ten lakh people throws away several hundred tonnes of waste every day, and a small part of it, such as used batteries, solvent sludge, pesticide containers and electroplating residues, is hazardous enough to poison groundwater for decades. This module of Environmental Chemistry and Non-conventional Energy Sources (BSC2032, FE Semester 2) explains integrated solid waste management, the waste hierarchy and the rules that govern waste in India, defines hazardous waste and its composition, and describes the methods used to control it: physical methods (sedimentation, adsorption, ion exchange, electrodialysis, reverse osmosis) and chemical and other methods (neutralisation, chemical precipitation, oxidation-reduction, biological treatment and incineration). It maps to CO3. Questions are mainly descriptive; principle plus a reaction or a diagram for each method is the winning format.
Summary
Solid waste: Solid waste is any discarded solid or semi-solid material from households, shops, institutions, industries, construction and agriculture. Municipal solid waste (MSW) in India is roughly half biodegradable (food and garden waste), with the rest made up of paper, plastics, glass, metals, textiles, inert material (dust, ash, debris) and small amounts of domestic hazardous waste. Per capita generation in Indian cities is commonly in the range of about 0.3 to 0.6 kg per day, rising with income and urbanisation. Poorly managed waste blocks drains, breeds flies, mosquitoes and rats, produces leachate that contaminates groundwater, releases methane (a powerful greenhouse gas) and catches fire in open dumps, as seen at large dump sites in Mumbai and Delhi.
Integrated solid waste management (ISWM): ISWM is a comprehensive approach that combines several complementary methods (reduction, segregation, collection, transport, recycling, composting, energy recovery and landfilling) chosen to suit local waste composition, so that waste is handled in the most environmentally sound and economical way. It considers the whole life cycle of waste and involves all stakeholders: citizens, municipal bodies, informal recyclers (waste pickers), industry and regulators. Functional elements: (1) waste generation and reduction at source; (2) segregation and storage at source; (3) collection (door-to-door); (4) transfer and transport; (5) processing and recovery (material recovery facilities, composting, biomethanation, refuse derived fuel, waste-to-energy); (6) disposal of only the residual inert waste in engineered sanitary landfills.
Waste hierarchy: The waste hierarchy ranks options from most preferred to least preferred: (1) prevention or reduction (avoid producing waste: buy less packaging, design durable products); (2) reuse (use items again for the same or another purpose: refillable bottles, repairing); (3) recycling (reprocess materials into new products: paper, metals, plastics, glass) including composting of organics; (4) recovery (recover energy by incineration with energy recovery, biogas, refuse derived fuel); (5) disposal (sanitary landfill as the last resort). It is drawn as an inverted pyramid with prevention at the wide top. The aim is to move waste up the hierarchy, conserving resources and reducing pollution; this links with the 3R or 5R (refuse, reduce, reuse, repurpose, recycle) ideas and with the circular economy.
Rules and regulations for solid waste management in India: Waste rules are notified under the Environment (Protection) Act, 1986 by the Ministry of Environment, Forest and Climate Change (MoEFCC) and enforced by the Central and State Pollution Control Boards and local bodies. Key rules: (1) Solid Waste Management Rules, 2016, which extended rules beyond municipal areas, made source segregation into biodegradable, non-biodegradable and domestic hazardous waste mandatory, introduced user fees and spot fines, and required bulk generators to process wet waste on site. These were replaced by the Solid Waste Management Rules, 2026, notified in January 2026 and in force from 1 April 2026, which require four-stream segregation at source (wet, dry, sanitary and special care waste), add extended responsibility for bulk waste generators and set up a centralised online portal for tracking waste. (2) Plastic Waste Management Rules, 2016 (amended several times), which introduced extended producer responsibility (EPR) for plastic packaging and, from 1 July 2022, banned identified single-use plastic items. (3) E-Waste (Management) Rules, 2022 with EPR for producers. (4) Bio-Medical Waste Management Rules, 2016, with colour-coded segregation (yellow, red, white translucent and blue categories). (5) Hazardous and Other Wastes (Management and Transboundary Movement) Rules, 2016. (6) Construction and Demolition Waste Management Rules. (7) Batteries (Waste Management) Rules, 2022. Swachh Bharat Mission (Urban) supports these with funds for collection, processing and remediation of legacy dump sites.
Hazardous waste, definition: Hazardous waste is any waste which, because of its physical, chemical, biological, reactive, toxic, flammable, explosive or corrosive characteristics, causes or is likely to cause danger to health or the environment, whether alone or in contact with other wastes or substances (this is essentially the definition in the Indian Hazardous and Other Wastes Rules, 2016). Four characteristics widely used in textbooks to identify it are listed below. These are general criteria, with the numerical limits taken from the US EPA (RCRA) rules. India's 2016 Rules instead list hazardous wastes by process in Schedule I and by concentration limits and characteristics in Schedule II: ignitability (flash point below about 60 °C, for example spent solvents), corrosivity (pH 2 or less, or 12.5 or more, for example spent acids and alkalis), reactivity (unstable, reacts violently with water or releases toxic gases, for example cyanide or sulphide wastes) and toxicity (harmful when ingested or absorbed, leachable heavy metals, pesticides). Infectious and radioactive wastes are also hazardous but are covered by separate rules.
Composition and sources of hazardous waste: Industrial sources dominate: electroplating and metal finishing (cyanides, Cr, Ni, Zn, Cd sludges), tanneries (chromium), petroleum refining (oily sludge, spent catalysts), chemical, dye and pharmaceutical industries (spent solvents, toxic organics, residues), pesticide manufacture (pesticide residues and containers), paints and pigments (lead, chromium), chlor-alkali (mercury), batteries (lead, acid), thermal plants (some fly ash constituents), and electrical equipment (PCB-containing transformer oils). Households produce small amounts: batteries, fluorescent lamps (mercury), paints, pesticides, cleaning chemicals and medicines. Typical constituents are heavy metals (Hg, Pb, Cd, Cr, As, Ni), cyanides, acids and alkalis, halogenated organics (PCBs, chlorinated solvents), phenols, oils, pesticides and persistent organic pollutants.
Hazardous waste management: The approach is cradle-to-grave control: minimise generation, segregate, label and store safely, transport under manifest, treat to reduce volume and toxicity, and dispose of residues in secure (double-lined) landfills. Treatment methods are physical, chemical, biological and thermal.
Physical methods: (1) Sedimentation: suspended particles heavier than water settle under gravity in a tank (clarifier) when the flow is slowed; settling may be helped by coagulants (alum, ferric chloride) and flocculants (polyelectrolytes). Used to separate precipitated metal hydroxide sludge from treated water. (2) Adsorption: dissolved organic pollutants (phenols, dyes, pesticides, chlorinated solvents) and some metals are attracted and held on the surface of a solid adsorbent with large surface area, most commonly activated carbon (granular in columns or powdered); other adsorbents are activated alumina (fluoride, arsenic), silica gel and zeolites. When saturated, the carbon is regenerated thermally or disposed of. (3) Ion exchange: the waste water is passed through a column of synthetic resin beads carrying exchangeable ions; cation exchange resins (\(R-SO_3H\)) exchange H⁺ for metal ions such as Cu²⁺, Ni²⁺ and Pb²⁺ (\(2R-SO_3H + Ni^{2+} \rightarrow (R-SO_3)_2Ni + 2H^+\)), and anion exchange resins (\(R-NR_3OH\)) exchange OH⁻ for anions such as chromate and cyanide complexes. Exhausted resins are regenerated with acid or alkali, producing a concentrated solution from which metals can be recovered. (4) Electrodialysis: the water flows between alternating cation-permeable and anion-permeable membranes placed between two electrodes; under a DC voltage, cations move towards the cathode through cation membranes and anions towards the anode through anion membranes, so ions are concentrated in alternate compartments (brine) and removed from the others (diluate). It is used for desalting brackish water and for recovering metals from electroplating rinse waters. (5) Reverse osmosis (RO): osmosis is the flow of solvent from a dilute to a concentrated solution through a semipermeable membrane. If a pressure greater than the osmotic pressure is applied to the concentrated side, water flows the other way, through the membrane (cellulose acetate or polyamide thin film composite), leaving salts, metals and most organics behind. Operating pressures are about 10 to 70 bar. RO removes 95 to 99 percent of dissolved salts and is used for zero liquid discharge systems and for recovering water from industrial effluents; the reject stream must be managed.
Chemical methods: (1) Neutralisation: acidic wastes are neutralised with lime, limestone, caustic soda or soda ash, and alkaline wastes with sulphuric or hydrochloric acid or CO2, bringing pH to about 6 to 9 before further treatment or discharge (\(H_2SO_4 + Ca(OH)_2 \rightarrow CaSO_4 + 2H_2O\)). Mixing acidic and alkaline wastes from different units can neutralise both. (2) Chemical precipitation: dissolved heavy metals are converted into insoluble compounds that settle: hydroxide precipitation with lime or NaOH (\(Cu^{2+} + 2OH^- \rightarrow Cu(OH)_2\downarrow\)) at an optimum pH for each metal, sulphide precipitation (lower solubility, \(Pb^{2+} + S^{2-} \rightarrow PbS\downarrow\)) and carbonate precipitation. Phosphate can be precipitated with alum or lime. The sludge is separated by sedimentation and filtration. (3) Chemical oxidation-reduction: changes toxic species to less toxic or more easily removed forms. Example of oxidation: cyanide from electroplating is destroyed by alkaline chlorination, first to cyanate and then to nitrogen and carbon dioxide: \(CN^- + OCl^- \rightarrow CNO^- + Cl^-\), \(2CNO^- + 3OCl^- + H_2O \rightarrow N_2 + 2HCO_3^- + 3Cl^-\). Other oxidants are ozone, hydrogen peroxide and Fenton's reagent (H2O2 + Fe²⁺) for organics. Example of reduction: toxic hexavalent chromium from tanning and plating is reduced at pH 2 to 3 with SO2, sodium bisulphite or ferrous sulphate to trivalent chromium and then precipitated as Cr(OH)3 at pH about 8: \(Cr_2O_7^{2-} + 3SO_2 + 2H^+ \rightarrow 2Cr^{3+} + 3SO_4^{2-} + H_2O\), \(Cr^{3+} + 3OH^- \rightarrow Cr(OH)_3\downarrow\). (4) Biological treatment: microorganisms degrade organic hazardous constituents (phenols, oils, many solvents, some pesticides) under aerobic or anaerobic conditions in activated sludge units, aerated lagoons, biofilters, land farming, composting and bioremediation of contaminated soil (bioventing, biopiles); phytoremediation uses plants to take up or stabilise metals. It is cheap but slow and cannot handle very toxic or non-biodegradable wastes or metals (which cannot be destroyed). (5) Incineration: controlled high temperature combustion of organic hazardous wastes in rotary kilns, liquid injection or fluidised bed incinerators, typically above about 850 °C, and at 1100 °C or more with at least 2 seconds residence time in the secondary chamber for wastes rich in halogenated organics. It destroys over 99.99 percent of organic hazardous constituents (destruction and removal efficiency), reduces volume by about 90 percent and can recover energy. Off-gases must be cleaned by scrubbers, bag filters and activated carbon to control acid gases, particulates, metals and dioxins and furans, and the ash goes to a secure landfill. Cement kilns can co-process some hazardous wastes.
Mind map
Solid and Hazardous Waste Management
- ISWM
- Generation, segregation, collection
- Transport, processing, recovery
- Landfill only for residue
- Waste hierarchy
- Prevent, reuse, recycle
- Recover energy
- Dispose (last)
- Indian rules
- SWM Rules 2016, replaced by SWM Rules 2026
- Plastic, e-waste, bio-medical, battery rules
- Hazardous and Other Wastes Rules 2016
- Hazardous waste
- Ignitable, corrosive, reactive, toxic
- Heavy metals, cyanides, solvents, PCBs
- Physical methods
- Sedimentation, adsorption
- Ion exchange, electrodialysis, RO
- Chemical and other methods
- Neutralisation, precipitation
- Oxidation (cyanide), reduction (Cr VI)
- Biological treatment, incineration
Treating an electroplating effluent step by step
- Segregate the streams: cyanide-bearing rinse, chromium-bearing rinse and acid/alkali wash water.
- Cyanide stream: raise pH above 10 and add sodium hypochlorite to oxidise CN⁻ to CNO⁻, then complete the oxidation to N2 and CO2 at pH about 8.5.
- Chromium stream: lower pH to 2 to 3 and add sodium bisulphite or SO2 to reduce Cr(VI) to Cr(III).
- Combine the pretreated streams and neutralise; add lime or NaOH to pH about 8 to 9 to precipitate Cr(OH)3, Ni(OH)2, Cu(OH)2 and Zn(OH)2.
- Add a flocculant and settle the precipitate in a clarifier (sedimentation); filter the sludge in a filter press.
- Polish the clear water by sand filtration and, if reuse is planned, ion exchange or reverse osmosis.
- Send the metal hydroxide sludge to an authorised treatment, storage and disposal facility for stabilisation and secure landfilling, or for metal recovery.
Important definitions
| Term | Meaning |
|---|---|
| Solid waste | Discarded solid or semi-solid material from human activities. |
| Integrated solid waste management | Combination of reduction, segregation, collection, recycling, treatment and disposal methods chosen to manage waste sustainably. |
| Waste hierarchy | Order of preference: prevention, reuse, recycling, recovery, disposal. |
| Hazardous waste | Waste that, due to toxic, corrosive, reactive, flammable, explosive or infectious properties, endangers health or environment. |
| Leachate | Contaminated liquid formed when water percolates through waste in a dump or landfill. |
| Extended producer responsibility | Producer's responsibility for the collection and environmentally sound management of its products at end of life. |
| Bulk waste generator | Large generator (such as a large housing society, hotel, institution) with extra responsibilities to process its waste. |
| Adsorption | Accumulation of molecules on the surface of a solid such as activated carbon. |
| Ion exchange | Reversible exchange of ions between a solution and a resin. |
| Electrodialysis | Removal of ions through ion-selective membranes under a DC electric field. |
| Reverse osmosis | Forcing water through a semipermeable membrane from concentrated to dilute side by applying pressure above osmotic pressure. |
| Incineration | Controlled high temperature combustion that destroys organic waste and reduces its volume. |
Formulas and key reactions
| Formula | Meaning |
|---|---|
| \( \pi = iCRT \) | Osmotic pressure (i van 't Hoff factor, C mol/m³ or mol/L with suitable R); RO pressure must exceed π. |
| \( H_2SO_4 + Ca(OH)_2 \rightarrow CaSO_4 + 2H_2O \) | Neutralisation of acid waste with lime. |
| \( M^{2+} + 2OH^- \rightarrow M(OH)_2\downarrow \) | Hydroxide precipitation of heavy metals. |
| \( CN^- + OCl^- \rightarrow CNO^- + Cl^- \) | First stage of cyanide oxidation. |
| \( 2CNO^- + 3OCl^- + H_2O \rightarrow N_2 + 2HCO_3^- + 3Cl^- \) | Second stage of cyanide oxidation. |
| \( Cr_2O_7^{2-} + 3SO_2 + 2H^+ \rightarrow 2Cr^{3+} + 3SO_4^{2-} + H_2O \) | Reduction of hexavalent chromium. |
| \( 2R\text{-}SO_3H + M^{2+} \rightarrow (R\text{-}SO_3)_2M + 2H^+ \) | Cation exchange of a metal ion. |
Key points to remember
- ISWM uses a mix of methods; landfill only for residues.
- Hierarchy: prevent > reuse > recycle > recover > dispose.
- SWM Rules 2026 (in force from 1 April 2026) replaced the 2016 rules and require four-stream segregation: wet, dry, sanitary and special care waste.
- Hazardous characteristics: ignitability, corrosivity, reactivity, toxicity.
- Corrosive: pH 2 or less, or 12.5 or more (general, US EPA-style criterion).
- Activated carbon adsorbs organics; activated alumina removes fluoride and arsenic.
- RO needs pressure above osmotic pressure; electrodialysis uses a DC field and ion-selective membranes.
- Cyanide is oxidised (alkaline chlorination); Cr(VI) is reduced to Cr(III) then precipitated.
- Metals cannot be destroyed by incineration or biological treatment; they are precipitated, recovered or immobilised.
- Incinerator flue gas needs cleaning to control acid gases, metals and dioxins.
Solved examples
Example 1. A city of 10 lakh people generates 0.5 kg of MSW per person per day. Find the daily waste. If 50 percent is biodegradable and composting reduces its mass by 60 percent, how much compost residue is produced?
Daily waste \(= 10^6\times0.5 = 5\times10^5\) kg = 500 t/day. Biodegradable = 250 t; compost residue \(= 250\times0.4 = 100\) t/day.
Example 2. How much slaked lime is needed to neutralise 1000 L of waste containing 0.01 mol/L H2SO4?
Moles of acid = 1000 × 0.01 = 10 mol. \(H_2SO_4 + Ca(OH)_2 \rightarrow CaSO_4 + 2H_2O\) needs 10 mol Ca(OH)2 = 10 × 74.09 = 741 g.
Example 3. Find the osmotic pressure of a 0.1 mol/L NaCl solution at 25 °C. What minimum pressure must an RO unit apply?
i = 2, C = 0.1 mol/L = 100 mol/m³, R = 8.314 J/mol K, T = 298 K. \(\pi = 2\times100\times8.314\times298 = 4.96\times10^5\) Pa ≈ 4.96 bar. The RO unit must apply more than about 5 bar (in practice much more to get a useful flow).
Example 4. 1 m³ of tannery waste contains 50 mg/L Cr(VI). How much SO2 is needed to reduce it?
Cr = 50 g = 50/52.0 = 0.962 mol. From the equation, 3 mol SO2 reduce 2 mol Cr, i.e., 1.5 mol SO2 per mol Cr. SO2 = 1.5 × 0.962 = 1.44 mol = 1.44 × 64.06 = 92.4 g.
Important questions and answers
Q1. What is integrated solid waste management? Explain its elements. (5 marks)
ISWM is the selection and combination of suitable techniques for managing solid waste, considering environmental, economic and social factors and the waste hierarchy. Elements: source reduction; segregation at source into the required streams; storage; door-to-door collection; transfer stations and transport; processing (material recovery facilities, composting, biomethanation, RDF, waste-to-energy); and disposal of residues in sanitary landfills with liners and leachate collection. Benefits: resource recovery, less landfill, less pollution, jobs for recyclers.
Q2. Explain the waste hierarchy with a diagram. (5 marks)
Inverted pyramid from most to least preferred: prevention (reduce quantity and toxicity at source), reuse, recycling (including composting), recovery (energy from waste), disposal (landfill). Explanation of each level with examples: avoiding plastic bags; refilling bottles; recycling paper and metals; producing biogas or RDF; landfilling inert residues. The higher levels save materials and energy and cause less pollution, so policy aims to push waste upwards.
Q3. Write a note on rules and regulations for solid waste management in India. (5 marks)
Framed under the Environment (Protection) Act, 1986. Solid Waste Management Rules, 2016 required segregation into three streams, user fees, on-site processing by bulk generators and responsibilities for local bodies; these have been replaced by the Solid Waste Management Rules, 2026 (in force from 1 April 2026), which require four-stream segregation (wet, dry, sanitary, special care), extended bulk waste generator responsibility and online tracking through a central portal. Related rules: Plastic Waste Management Rules, 2016 with EPR and single-use plastic ban from July 2022; E-Waste (Management) Rules, 2022; Bio-Medical Waste Management Rules, 2016; Hazardous and Other Wastes Rules, 2016; Construction and Demolition Waste Management Rules; Batteries (Waste Management) Rules, 2022. Enforcement by CPCB, SPCBs and urban local bodies; Swachh Bharat Mission funds implementation.
Q4. Define hazardous waste. Give its characteristics and composition. (5 marks)
Definition as above. Characteristics (general, US EPA-style criteria): ignitable (flash point below about 60 °C), corrosive (pH ≤ 2 or ≥ 12.5), reactive (explosive, water reactive, releases toxic gases), toxic (heavy metals, pesticides, carcinogens). Composition: heavy metal sludges, cyanides, spent acids and alkalis, spent solvents, oily sludge, pesticides, PCBs, paint residues, spent catalysts, contaminated containers; household batteries, CFLs and chemicals. Sources: electroplating, tanneries, refineries, chemicals, pharmaceuticals, pesticides, batteries.
Q5. Explain any three physical methods for hazardous waste treatment. (6 marks)
Adsorption on activated carbon: large surface area (500 to 1500 m²/g) holds organics; used in columns; carbon regenerated. Ion exchange: resins exchange H⁺ or Na⁺ for metal cations and OH⁻ for anions; regeneration gives a concentrate for metal recovery; used for plating rinse waters. Reverse osmosis: pressure above osmotic pressure drives water through a semipermeable membrane, rejecting dissolved salts and metals; used for water recovery and zero liquid discharge. Electrodialysis: ion-selective membranes and DC field separate ions into concentrate and diluate streams. Sedimentation: gravity settling of suspended and precipitated solids in clarifiers. (Choose any three with a sketch each.)
Q6. Explain chemical methods of hazardous waste treatment with reactions. (6 marks)
Neutralisation of acids with lime and of alkalis with acid or CO2 to pH 6 to 9. Chemical precipitation of heavy metals as hydroxides, sulphides or carbonates (\(Cu^{2+} + 2OH^- \rightarrow Cu(OH)_2\)). Oxidation of cyanide by alkaline chlorination (\(CN^- + OCl^- \rightarrow CNO^- + Cl^-\); \(2CNO^- + 3OCl^- + H_2O \rightarrow N_2 + 2HCO_3^- + 3Cl^-\)) and of organics by ozone, H2O2 or Fenton's reagent. Reduction of Cr(VI) to Cr(III) by SO2 or bisulphite in acid, followed by precipitation of Cr(OH)3. Each converts toxic soluble species into harmless or separable forms.
Q7. Write notes on (a) biological treatment (b) incineration of hazardous waste. (6 marks)
(a) Microbes degrade organic hazardous constituents aerobically (to CO2 and H2O) or anaerobically (to CH4 and CO2) in activated sludge, lagoons, biofilters, land farming, composting and in-situ bioremediation; nutrients and oxygen are supplied; cheap and natural but slow, sensitive to toxicity and unable to remove metals. (b) High temperature (850 to 1200 °C) oxidation of organic wastes in rotary kilns or liquid injection incinerators with secondary combustion chamber (about 2 s at 1100 °C for halogenated wastes); destroys 99.99 percent of organics, reduces volume and allows heat recovery; needs air pollution control (scrubbers, bag filters, activated carbon for dioxins); ash is landfilled securely. Costly, and public acceptance can be low.
Exam tips
- Draw the inverted pyramid for the waste hierarchy.
- Quote the correct years for Indian rules; mention that the 2026 SWM Rules replaced the 2016 rules.
- Write at least one balanced equation for neutralisation, precipitation, oxidation and reduction.
- For RO and electrodialysis, a labelled membrane sketch earns marks.
- Remember that heavy metals are only transferred or immobilised, never destroyed.
FAQs
Is incineration the best way to get rid of hazardous waste?
It is good for organic hazardous wastes because it destroys them almost completely, but it is costly, can form dioxins if poorly run and does not destroy metals. Waste minimisation comes first.
What are the four bins under the 2026 rules?
Wet waste (kitchen and garden), dry waste (paper, plastic, metal, glass), sanitary waste (diapers, sanitary pads) and special care waste (such as batteries, paint cans, medicines and other household hazardous items).
Why is hexavalent chromium reduced before precipitation?
Cr(VI) exists as soluble chromate or dichromate anions that do not precipitate as hydroxide and are highly toxic and carcinogenic. Reduced to Cr(III), it precipitates easily as Cr(OH)3 and is far less toxic.
What is a secure landfill?
An engineered landfill for hazardous residues with double liners (clay and HDPE), leachate collection and treatment, gas venting, groundwater monitoring and a final cover.
These notes follow the University of Mumbai first-year engineering syllabus (NEP 2020, Environmental Chemistry and Non-conventional Energy Sources) and were prepared with AI help and checked.
More in Environmental Chemistry and Non-conventional energy sources
See all →- Air Pollution Notes FE Sem 2 Environmental Chemistry | MU MU FE Sem 2 Environmental Chemistry Module 1: acid rain, ozone hole, photochemical smog, measuring and controlling SOx, NOx, CO, HC, catalyt...
- Water and Wastewater Notes FE Sem 2 Environmental Chemistry | MU MU FE Sem 2 Environmental Chemistry Module 2: water pollutants, hardness, pH, DO, chloride, eutrophication, activated sludge, BOD and COD wi...
- Renewable Energy Notes FE Sem 2 Environmental Chemistry | MU MU FE Sem 2 Environmental Chemistry Module 4: need for non-conventional energy; hydro, solar, wind, biomass, tidal and geothermal availabili...
- Biomass and Fuel Cell Notes FE Sem 2 Environmental Chemistry | MU MU FE Sem 2 Environmental Chemistry Module 5: biomass sources, pyrolysis, gasification, anaerobic digestion, biofuels and the hydrogen-oxyge...
- Sustainable Practices Notes FE Sem 2 Environmental Chemistry | MU MU FE Sem 2 Environmental Chemistry Module 6: energy resources, world consumption patterns, resource management, environmental ethics, energ...