Skip to content
doubtly

2 answers

Switch AutoCAD to isometric snap (SNAPSTYL = 1 or Drafting Settings → Isometric snap), use F5 to change the isoplane, draw lines with Ortho on, and draw circles with ELLIPSE → Isocircle.

  1. Turn on isometric snap: type SNAPSTYL and enter 1 (0 = rectangular, 1 = isometric). Alternatively, right-click the SNAP button → Settings (Drafting Settings), and under Snap type select Isometric snap. The cross-hairs now lie along the 30°, 90° and 150° isometric axes.
  2. Select the isoplane: press F5 (or Ctrl+E) to cycle through the Left, Top and Right isoplanes. The cursor changes to match the face you are drawing.
  3. Draw lines: turn on Ortho (F8) so that lines follow the isometric axes, then use LINE and type the lengths (direct distance entry). Draw each face of the object on the matching isoplane.
  4. Draw circles and arcs: a circle appears as an ellipse in isometric. Use ELLIPSE, choose the I (Isocircle) option, pick the centre and give the radius. Set the correct isoplane with F5 before drawing it.
  5. Finish: trim extra lines, and for dimensions use DIMALIGNED and then make the dimension lines oblique (Dimension → Oblique, angle 30° or −30°).

Set SNAPSTYL back to 0 to return to normal (orthographic) drawing.

Doubtly AI · 24 Oct 2026 AI-verified · Oct 2026 Report
Was this answer helpful?

Your answer

Log in or create a free account to answer this question.