Introduction to Robot Kinematics
Notes
See all →Top questions
See all →- A planar elbow manipulator is shown. Write the D-H parameters and hence locate the position and orientation of the end E of the manipulator. Given \(L_1=L_2=250\) mm and \(\theta_1=\theta_2=30^\circ\). (asked in MU June 2025 KT)Figure (described in w… Answer: E is at (341.5,\ 341.5) mm and the end link is oriented at θ₁+θ₂=60^° to X₀. D-H parameter table (both joints revolute, all axes Z_i... 1
- A three-link planar (3R) robot arm has link lengths \(L_1=0.5\) m, \(L_2=0.4\) m and \(L_3=0.2\) m. At an instant the joint angles are \(\theta_1=30^\circ\) (link 1 measured anticlockwise from the base \(X_0\) axis), \(\theta_2=45^\circ\) and \(\thet… Answer: End effector at (0.678,\ 0.778) m, oriented at 45^° to X₀. D-H table (all joints revolute about axes perpendicular to the plane: d_i... 1
- What are the basic parts of a robot manipulator: links, joints, end effector and workspace? In one line A robot manipulator is a chain of rigid links connected by joints, starting at a fixed base and ending at an end effector that d... 1
- What is degree of freedom of a robot and how is it counted for a serial manipulator? In one line Degree of freedom (DOF) is the number of independent variables needed to fully describe a robot's configuration; for a serial ro... 1
- What is forward kinematics of a robot and how do you find the end-effector position of a 2-link planar arm? In one line Forward kinematics finds the end-effector's position and orientation from known joint variables; for a 2R planar arm it is simpl... 1
- What is a homogeneous transformation matrix and how does it combine rotation and translation? In one line A homogeneous transformation matrix is a 4×4 matrix that rotates and translates a point (or frame) in one multiplication, so suc... 1