Skip to content
doubtly

System of Forces

20 solved questions 1 note

Chapter test coming soon Next chapter →

Every question from past university papers on System of Forces, newest paper first. Open any question for its full worked answer.

Mumbai University FE Sem 1 Engineering Mechanics (ESC101) Question Paper December 2025

Full paper →
  1. Q.1 (a) A car is made to move by applying resultant force R = 2000 N along the x-axis. This resultant is developed due to two pulling forces \(F_1\) and \(F_2\) on two ropes as shown in figure. Determine the tension in individual ropes.

    Figure: car with front point O; resultant R = 2000 N along the x-axis (to the right). Rope force \(F_1\) acts at O at 35° above the x-axis and rope force \(F_2\) at 25° below the x-axis.

    3 marks · See worked answer →

  2. Q.1 (d) A force 30 N is acting at point P(3, 2, 1) m. The force makes 35° & 85° with x & y axes respectively. Express the force in vector form.

    3 marks · See worked answer →

  3. Q.3 (A) A system of forces acting on a bell crank is as shown in fig. Determine the magnitude, direction and the point of application of the resultant w.r.t. O.

    Figure: bell crank pivoted at O. A horizontal arm extends 300 mm to the left of O (two segments of 150 mm). A 1000 N vertical downward load acts at 150 mm left of O; a 500 N force acts at the left end (300 mm from O), directed downward to the right at 60° to the horizontal. A second arm rises from O to the upper right at 60° to the horizontal, 300 mm long (two segments of 150 mm). A 1200 N vertical downward load acts at its mid-point (150 mm from O) and a 700 N horizontal force acts to the left...

    7 marks · See worked answer →

Mumbai University FE Sem 1 Engineering Mechanics (ESC101) Question Paper June 2025 (KT)

Full paper →
  1. Q.1 (a) Resolve the force F = 900 N acting at B as shown in Fig. into parallel components at O and A.

    Figure: horizontal bar OAB; O at the left end, A at 1 m from O, B at the right end, 2 m from A (OB = 3 m). A vertical downward force of 900 N acts at B.

    3 marks · See worked answer →

  2. Q.1 (d) A force of magnitude 50 kN is acting at point A(2,3,4) m towards point B(6,−2,−3) m. Find the components of this force along X, Y and Z axis.

    3 marks · See worked answer →

  3. Q.3 (A) Determine the resultant of the following force system as shown in figure. Also locate its position w.r.t. O. Radius of circle is 2 m.

    Figure: circle of radius 2 m, centre O, with horizontal and vertical centre lines. Four horizontal forces act at points on the circumference: 150 N pointing left at the point on the radius inclined at 60° above the horizontal on the left side (upper-left); 90 N pointing left (acting into the circle) at the point on the radius 30° above the horizontal on the right side (upper-right); 200 N pointing right at the point on the radius 30° below the horizontal on the right side (lower-right); 100 N po...

    7 marks · See worked answer →