Engineering
- How are lasers used in metal work such as cutting, welding and drilling? In one line A focused laser beam delivers a very high power density to a tiny spot, which heats metal fast enough to melt or vaporise it, so... 1
- What is the critical angle and when does total internal reflection of light take place? In one line The critical angle is the angle of incidence in the denser medium for which the refracted ray just grazes the boundary, and for... 1
- How does light propagate through an optical fibre by total internal reflection? In one line An optical fibre guides light because its core has a higher refractive index than its cladding, so light entering within the acc... 1
- What are the acceptance angle and acceptance cone of an optical fibre? In one line The acceptance angle is the maximum angle to the fibre axis at which light can enter the fibre and still be guided by total inte... 1
- What is the numerical aperture of an optical fibre and how is its formula derived? In one line Numerical aperture (NA) is the sine of the acceptance angle (times the index of the outside medium) and measures how much light... 1
- What is the difference between single-mode and multimode optical fibres? In one line A single-mode fibre has a very thin core that lets only one path (mode) of light travel, while a multimode fibre has a thicker c... 1
- How do step-index and graded-index optical fibres differ in structure and light travel? In one line In a step-index fibre the core has one uniform refractive index that drops suddenly at the cladding, while in a graded-index fib... 1
- What is attenuation in an optical fibre and how is the attenuation coefficient calculated? In one line Attenuation is the gradual loss of optical power as light travels along a fibre, and the attenuation coefficient gives this loss... 1
- What factors cause attenuation or signal loss in an optical fibre? In one line Attenuation in fibres is caused mainly by absorption, scattering and bending losses, plus losses at joints and connectors. Expla... 1
- What are the main blocks of a fibre optic communication system and what does each do? In one line A fibre optic communication system converts an electrical signal into light at the transmitter, sends it through an optical fibr... 1
- Why is optical fibre communication better than copper cable communication? In one line Optical fibres carry far more information over longer distances with lower loss and no electrical interference, while being ligh... 1
- How does interference occur in a thin film of uniform thickness, and what is the path difference? In one line Light reflected from the top and bottom surfaces of a thin film comes from the same wave (division of amplitude), so the two ref... 1
- What are the conditions for bright and dark fringes in reflected light from a thin film? In one line In reflected light from a thin film, brightness occurs when 2μ tcos r = (2n-1)λ/2 and darkness when 2μ tcos r = nλ. Explained si... 1
- How are interference fringes formed in a wedge-shaped thin film and what is the fringe width? In one line A wedge-shaped film has thickness increasing steadily from the edge, so each fringe follows a line of constant thickness, giving... 1
- How are Newton's rings formed and why is the central spot dark in reflected light? In one line Newton's rings are concentric circular fringes formed by interference in the air film between a plano-convex lens and a flat gla... 1
- How are Newton's rings used to find the wavelength of monochromatic light? In one line By measuring the diameters of two dark rings that are p rings apart and knowing the lens radius R, the wavelength is found from... 1
- How are Newton's rings used to find the refractive index of a transparent liquid? In one line Filling the gap between the lens and plate with a liquid shrinks the rings by a factor √(μ), so the refractive index is the rati... 1
- How does an anti-reflecting coating work and what thickness and refractive index should it have? In one line An anti-reflecting coating is a thin transparent film of quarter-wave optical thickness whose two reflected beams cancel by dest... 1
- What is the gradient of a scalar field and what is its physical meaning? In one line The gradient of a scalar field is a vector that points in the direction in which the field increases fastest, and its magnitude... 1
- What is the divergence of a vector field and what does it tell us physically? In one line Divergence of a vector field measures the net outward flow (flux) per unit volume from a point, showing whether the point acts a... 1
- What are tangential and normal components of acceleration in curvilinear motion? In one line On a curved path, acceleration splits into a tangential part that changes speed and a normal part, towards the centre of curvatu... 1
- How do you find the radius of curvature of a particle's path from its x and y motion? In one line Split the acceleration into tangential and normal parts using the velocity direction, then use ρ = v²/a_n. Explained simply The... 1
- What is general plane motion of a rigid body and how does it differ from translation and rotation? In one line General plane motion is the combination of translation and rotation of a rigid body in a plane, like a rolling wheel or a connec... 1
- What is the instantaneous centre of rotation (ICR) and how is it located? In one line The ICR is the point, in or outside the body, that has zero velocity at a given instant, so the body seems to rotate purely abou... 1