Engineering
- Define Matrix phase and dispersed phase of composites. A composite has two constituents: 1. Matrix phase – the continuous phase that surrounds and binds the other phase. It may be a polymer, meta... 1
- What is supercritical CO2 and how does it differ from liquid and gaseous CO2. Supercritical CO₂ (scCO₂) is CO₂ held above its critical temperature (T_c = 31.1 °C) and critical pressure (P_c = 72.8 atm ≈ 7.38 MPa). Abov... 1
- 1 gm. of coal sample was used for determination of nitrogen. The ammonia evolved was passed into 50ml of 0.1 N H2SO4, the excess acid required 42 ml. of 0.1N NaOH for neutralization Calculate % of N. Given: W = 1 g; acid taken = 50 mL of 0.1 N H₂SO₄; excess acid = 42 mL of 0.1 N NaOH. Volume of 0.1 N acid used by NH₃ = 50 − 42 = 8 mL. %N... 1
- How do following factors affects the rate of corrosion i) PH medium ii) Purity of metal iii) Area of anode and cathode. i) pH of the medium: the rate of corrosion generally rises as pH falls, because acidic media supply H⁺ for the cathodic reaction (2H⁺ + 2e⁻... 1
- Explain the determination of sulphur present in coal sample and write its significance. Principle: the sulphur in coal is converted to sulphate and weighed as BaSO₄. Procedure A known mass (W g) of coal is burnt in a bomb calori... 1
- Write an informative note on biodiesel. Biodiesel is a mixture of mono-alkyl (methyl or ethyl) esters of long-chain fatty acids. It is made from vegetable oils (jatropha, karanja,... 1
- In a polymer sample 30% molecules have a molecular mass 20,000, 40% have molecular mass 30,000 and the 30% have 60,000. Calculate the weight average, number average molecular weight and polydispersity of polymer sample. Given (number fractions of molecules): take 100 molecules, so N_i = 30, 40, 30. N_iM_iN_iM_iN_iM_i² 3020,0006.0 × 10⁵1.2 × 10¹⁰ 4030,00012.0... 1
- What is condensed phase rule equation? Write merits and limitation of phase rule. Condensed (reduced) phase rule: the phase rule is F = C − P + 2. For solid–liquid equilibria such as alloys, the vapour phase is practically... 1
- Write a short note on sandwich panel of structural composite write its applications. Sandwich panel (a structural composite) A sandwich panel has two thin, strong and stiff outer face sheets (skins) bonded to a thick, lightwe... 1
- Give the definitions and significance of following properties of polymer. Tensile strength, insulation resistance and refractive index. 1. Tensile strength Definition: the maximum tensile (pulling) stress a polymer specimen can withstand before it breaks: tensile strength = m... 1
- Explain synthesis of Adipic acid by traditional and green pathway. Also write the principle of green chemistry involved in this reaction. Conventional (traditional) route C₆H₆ xrightarrow[Ni / Pt]3H₂ undersetcyclohexanemathrmC₆H₁₂ xrightarrow[Co catalyst]O₂\ (air) undersetcyclo... 1
- Define calorific value and write the significance of proximate analysis of coal. Calorific value is the total quantity of heat liberated when a unit mass (or unit volume) of a fuel is burnt completely in air or oxygen. Un... 1
- Explain the sacrificial anode cathodic protection method with a neat and well-labelled diagram. Cathodic protection: the metal to be protected is forced to act as the cathode of an electrochemical cell, so it does not corrode. Corrosion... 1
- Explain the terms involved in Gibbs phase rule with an example of a one-component system. (Phase, Component and Degree of Freedom) Gibbs phase rule: F = C − P + 2 Phase (P): a homogeneous, physically distinct and mechanically separable part of a heterogeneous system, sep... 1
- Define the tensile strength of a polymer and explain its significance. Tensile strength is the maximum tensile (stretching) stress that a polymer can withstand before it breaks (fractures): Tensile strength = (m... 1
- Discuss applications of composites. Composites combine high strength and stiffness with low weight and good corrosion resistance. Their main applications are: Aerospace: CFRP a... 1
- Discuss super critical solvents with its applications. A supercritical fluid (SCF) is a substance held above its critical temperature (T_c) and critical pressure (P_c). There it exists as a singl... 1
- How is the percentage of sulphur determined in a solid fuel? Principle: the sulphur in the solid fuel is converted to sulphate, precipitated as BaSO₄ and weighed. A known mass (W g) of the fuel is burn... 1
- How can material selection and design prevent corrosion? Explain which protective coatings can be used for corrosion prevention. 1. Proper selection of material Use noble or corrosion-resistant metals (Pt, Au, Ti) or alloys such as stainless steel and cupronickel where... 1
- Calculate the gross and net calorific value of coal having the following compositions. Carbon=85%, hydrogen=8%, sulphur=1%, nitrogen=2%, ash=4%, and the latent heat of steam is 587 cal/gm. Given: C = 85%, H = 8%, S = 1%, N = 2%, ash = 4%. Total = 85 + 8 + 1 + 2 + 4 = 100%, so O = 0%. Latent heat of steam = 587 cal/g = 587 kcal/... 1
- Write the conventional and green methods for the synthesis of adipic acid. Conventional (traditional) route C₆H₆ xrightarrow[Ni / Pt]3H₂ undersetcyclohexanemathrmC₆H₁₂ xrightarrow[Co catalyst]O₂\ (air) undersetcyclo... 1
- Explain all types of chemical bonds existing in polymers. Polymers contain primary (covalent) bonds along the chain and secondary (intermolecular) forces between chains. Together they decide the str... 1
- Write notes on (a) reduced phase rule (c) applications of phase diagram. (a) Reduced (condensed) phase rule The Gibbs phase rule is F = C − P + 2. In solid–liquid systems (alloys) the gas phase is absent or neglig... 1
- Classify composites with the help of a diagram and an example of each class. COMPOSITES ______________________|______________________ | | | Particle-reinforced Fibre-reinforced Structural ____|____ ____|_______ ____|_... 1