Engineering
- A diffraction grating used at normal incidence gives a line, λ1 = 6000 A˚ in a certain order superimposed Answer: about 2778 lines per cm. Grating equation: (e+d)sinθ = nλ. The n th order of λ₁ coincides with the (n+1) th order of λ₂ at the same... 1
- What is importance of resonant cavity in the operation of laser? Answer: the resonant (optical) cavity provides optical feedback: its mirrors send photons back and forth through the active medium so that s... 1
- How is multipath dispersion overcome in Graded index fibre? Answer: in a graded-index fibre the refractive index decreases from the axis outwards, so rays that travel longer paths away from the axis a... 1
- Distinguish between single mode and multimode optical fiber Answer: a single-mode fibre has a very thin core that allows only one path (mode) of light; a multimode fibre has a wider core that allows m... 1
- Distinguish between step index and graded index optical fiber. Answer: in a step-index fibre the core has a uniform refractive index that drops suddenly at the cladding; in a graded-index fibre the core... 1
- Derive Maxwell’s third equation in integral and differential form. Given that D = 20x î +10 ĵ (C/m2 ).
- Draw the schematic diagram of Scanning Electron Microscope and explain its construction, working, advantages
- What is population inversion state? Explain its significance in the operation of LASER. Answer: population inversion is the state in which more atoms are in a higher (excited) energy level than in a lower energy level. It is ess... 1
- Compute the maximum radius allowed for a fiber having core refractive index 1.5 and 1.48. Answer: maximum core radius ≈ 2.35\ μm (core diameter about 4.7 µm). A step-index fibre supports only one mode if its normalised frequency (... 1
- What is a grating? Define grating element? Discuss the phenomenon of Fraunhofer’s diffraction at a grating and obtain Answer: a grating is a large number of equal, equidistant parallel slits; the grating element is (e+d), the width of one slit plus one opaqu... 1
- Discuss the phenomenon of Fraunhofer’s diffraction at a single slit and obtain the condition for the first minimum. Answer: in Fraunhofer single-slit diffraction the first minimum occurs where asinθ = λ. For the grating, the maximum order visible is 14. Ph... 1
- With neat energy level diagram describe the construction and working of a He-Ne Laser.
- What are different techniques to synthesize nanomaterials? Explain any one of them in detail. Answer: nanomaterials are synthesised by top-down methods (ball milling, lithography, etching, laser ablation) or bottom-up methods (sol-gel... 1
- State the advantages of optical fiber cables on conventional electrical cables Answer: optical fibres carry far more information over longer distances with lower loss, are immune to electrical interference, and are ligh... 1
- Find the divergence and curl of a vector A= x2 y î + (x-y) k ̂ Answer: nabla·vec A = 2xy and nabla×vec A = -hat i - hat j - x²hat k. Here A_x = x²y, A_y = 0, A_z = x - y. Divergence nabla·vec A = (∂ A_x)... 1
- Derive the expression of numerical aperture for a step index fiber. A light ray enters an optical fiber from air. Answer: NA = sqrtn₁²-n₂². For the given fibre, critical angle ≈ 68.1^° and NA ≈ 0.568. Derivation Let the core index be n₁, cladding index n... 1
- Light is incident normally on a grating 0.25 cm wide with 1250 lines. Answer: Angular separation of the two sodium lines in the first order ≈ 0.018^° (about 1.08 minutes of arc). Required resolving power is 983... 2
- Explain top down and bottom up approaches to prepare nanomaterials. Answer: in the top-down approach a bulk material is broken down into nanosized pieces; in the bottom-up approach nanostructures are built up... 1
- Explain the construction and reconstruction of hologram. Answer: a hologram is made by recording, on a photographic plate, the interference pattern between laser light scattered from an object (obj... 1
- How many orders will be observed by grating having 4000 lines/cm, if it is illuminated by light of wavelength Grating equation is (a+b) sinθ =nλ, N= 4000 lines/cm For maximum orders sinθ = 1 Therefore, n_max = ((a+b))/λ = 1/Nλ For 5000 Å, n_max = fra... 2
- Describe the types of oxide film formed in oxidation corrosion The extent of corrosion depends upon the type of oxide film formed by metals. Oxide films formed are classified into three categories, Stabl... 2
- What are the Characteristics of electromagnetic radiations? Characteristics of electromagnetic radiations: Wavelength: It may be defined as the distance between two neighbouring crests or troughs of w... 2
- Explain any 2 types of wet corrosion with diagram and reactions Answer: Two types of wet (electrochemical) corrosion are (i) hydrogen evolution type, in acidic medium, where 2H^++2e^-→ H₂ at the cathode,... 2
- What is the principle of spectroscopy? The basic principle shared by all spectroscopic techniques is to shine a beam of electromagnetic radiation onto a sample, and observe how it... 1