Skip to content
doubtly

Draw the projections of following points on a common reference line keeping the distance between their

Draw the projections of following points on a common reference line keeping the distance between their projectors 30 mm apart.
(i) Point A is 20 mm below the H.P. and 50 mm in front the V.P.
(ii) Point B is in the H.P. and 40 mm behind the V.P.
(iii) Point C is 30 mm in front of the V.P. and in the H.P.
(iv) Point D is 50 mm above the H.P. and 30 mm behind the V.P.
Doubtly Asked Updated Student doubt semester 2 engineering drawing autocad Save WhatsApp Report

1 answer

Best answer

Answer: Draw the reference line XY and four projectors 30 mm apart. For each point mark the front view (a′, b′ …) from the H.P. distance and the top view (a, b …) from the V.P. distance, on the same projector.

Rule used (first-angle projection):

  • Front view: above XY if the point is above the H.P., below XY if below the H.P., on XY if in the H.P.
  • Top view: below XY if the point is in front of the V.P., above XY if behind the V.P., on XY if in the V.P.
  • Both views of a point always lie on one projector perpendicular to XY.
PointPositionFront viewTop viewQuadrant
A (projector 1)20 mm below H.P., 50 mm in front of V.P.a′ 20 mm below XYa 50 mm below XYIV
B (projector 2, 30 mm to the right)in H.P., 40 mm behind V.P.b′ on XYb 40 mm above XYon H.P. between II and III
C (projector 3, 30 mm further)in H.P., 30 mm in front of V.P.c′ on XYc 30 mm below XYon H.P. between I and IV
D (projector 4, 30 mm further)50 mm above H.P., 30 mm behind V.P.d′ 50 mm above XYd 30 mm above XYII

Steps:

  1. Draw a horizontal line XY and four thin vertical projectors 30 mm apart.
  2. On projector 1 mark a′ 20 mm below XY and a 50 mm below XY.
  3. On projector 2 mark b′ on XY and b 40 mm above XY.
  4. On projector 3 mark c′ on XY and c 30 mm below XY.
  5. On projector 4 mark d′ 50 mm above XY and d 30 mm above XY.
  6. Name all points (front views with a dash, top views without) and dimension each distance from XY.

Note: for A both views fall below XY, and for D both views fall above XY, as expected for the fourth and second quadrants.

Doubtly · 23 Apr 2022 Report
Was this answer helpful?

Your answer

Log in or create a free account to answer this question.