Engineering Mechanics
- What is forward kinematics of a robot and how do you find the end-effector position of a 2-link planar arm? In one line Forward kinematics finds the end-effector's position and orientation from known joint variables; for a 2R planar arm it is simpl... 1
- What is a homogeneous transformation matrix and how does it combine rotation and translation? In one line A homogeneous transformation matrix is a 4×4 matrix that rotates and translates a point (or frame) in one multiplication, so suc... 1
- What are Denavit-Hartenberg (D-H) parameters and how are frames assigned to robot links? In one line D-H parameters are four numbers per link ( θ, d, a, α) that describe how each joint frame is placed relative to the previous one... 1
- How do you find the forward kinematics of a 2-DOF serial robot using D-H homogeneous transformations? In one line Write the D-H table, form each link's transformation matrix, and multiply them; the last column of the result gives the end-effe... 1
- What are tangential and normal components of acceleration in curvilinear motion? In one line On a curved path, acceleration splits into a tangential part that changes speed and a normal part, towards the centre of curvatu... 1
- How do you find the radius of curvature of a particle's path from its x and y motion? In one line Split the acceleration into tangential and normal parts using the velocity direction, then use ρ = v²/a_n. Explained simply The... 1
- What is general plane motion of a rigid body and how does it differ from translation and rotation? In one line General plane motion is the combination of translation and rotation of a rigid body in a plane, like a rolling wheel or a connec... 1
- What is the instantaneous centre of rotation (ICR) and how is it located? In one line The ICR is the point, in or outside the body, that has zero velocity at a given instant, so the body seems to rotate purely abou... 1
- How is the ICR method applied to a wheel rolling without slipping? In one line For rolling without slipping, the contact point with the ground is the ICR, so every point's velocity equals ω times its distanc... 1
- How do you use the ICR method for a crank and connecting rod (two-link) mechanism? In one line Use the crank's known rotation to get the velocity of the crank pin, then locate the connecting rod's ICR from the crank-pin and... 1
- How is Newton's second law used to relate force and acceleration of a particle in kinetics? In one line Kinetics links motion to its cause: the net force on a particle equals its mass times its acceleration, Σ F = ma, applied along... 1
- What is D'Alembert's principle and what is the inertia force in dynamic equilibrium? In one line D'Alembert's principle says that adding a fictitious inertia force -ma to the real forces turns a dynamics problem into an equil... 1
- How are equations of dynamic equilibrium applied to connected bodies over a pulley? In one line Draw an FBD of each body with its inertia force, link them through the common string tension and acceleration, and solve the equ... 1
- What is the principle of linear impulse and momentum and how is it applied? In one line The impulse of the net force on a particle over a time interval equals the change in its linear momentum. Explained simply Catch... 1
- What is the law of conservation of linear momentum and when can it be applied? In one line If no net external impulse acts on a system, its total linear momentum stays the same before and after an interaction. Explained... 1
- What is an impact, and what are direct, oblique and central impacts and the phases of collision? In one line An impact is a collision of two bodies over a very short time with very large forces; it is classified by the line of impact and... 1
- What is the coefficient of restitution and how is it found from relative velocities or bounce heights? In one line The coefficient of restitution e is the ratio of the relative velocity of separation to the relative velocity of approach along... 1
- How do you solve a direct central impact between two bodies using momentum and restitution? In one line Use conservation of momentum and the coefficient of restitution as two equations to find the two unknown final velocities. Expla... 1
- How is an oblique central impact solved, for a ball hitting a smooth surface or another ball? In one line Resolve velocities along and perpendicular to the line of impact; the perpendicular (tangential) components do not change, and t... 1
- How do you calculate the loss of kinetic energy in a collision of inelastic bodies? In one line Kinetic energy before minus kinetic energy after gives the loss, which depends on (1 - e²) and is zero only for a perfectly elas... 1
- What is the centroid of a plane lamina and how does it differ from centre of gravity? In one line The centroid is the geometric centre of an area, the point where the whole area can be imagined to be concentrated for taking fi... 1
- What are the centroid positions of standard shapes like rectangle, triangle, circle, semicircle and quarter circle? In one line Each primitive shape has a fixed, memorised centroid location measured from a known edge or corner, which you use as building bl... 1
- How do you derive the centroid of a triangle from first principles using integration? In one line Integrate thin horizontal strips parallel to the base; the first moment divided by the area gives the centroid at one-third of t... 1
- How is the centroid of a semicircle and a quarter circle derived to be 4r/3π from the diameter? In one line Divide the area into thin triangular sectors from the centre, integrate their first moments, and divide by the area to get 4r/3π... 1