Engineering
- Explain the optical resonator (resonant cavity) of a laser and its role in producing the laser beam. Answer: Two parallel mirrors at the ends of the active medium, one fully and one partially reflecting; they feed photons back through the me... 1
- Explain the working principle of a single-phase transformer and derive the EMF equation. (asked in MU June 2025 KT) Answer: A transformer works on mutual induction; the RMS induced EMF in a winding of N turns is E=4.44 f Φ_m N. Construction (in brief): two... 1
- A 22 kVA, 2200/220 V, 50 Hz single-phase transformer has 1000 turns on its primary. Assuming it to be ideal, find (i) the transformation ratio, (ii) the number of secondary turns, (iii) the maximum flux in the core, (iv) the maximum flux density if t… Answer: (i) K=0.1; (ii) N₂=100; (iii) Φ_m=9.91 mWb; (iv) B_m=0.991 T; (v) I₁=10 A, I₂=100 A. (i) K=V₂/V₁=220/2200=0.1 (step-down). (ii) N₂=K... 1
- What are the losses in a single-phase transformer? Define its efficiency and state the condition for maximum efficiency. Answer: Iron (core) losses, which are constant, and copper losses, which vary with load; η=output/(output+losses), maximum when copper loss... 1
- Explain the working principle of a three-phase induction motor and mention its types. (asked in MU June 2025 KT) Answer: A 3-phase supply to the stator produces a rotating magnetic field at synchronous speed N_s=120f/P; it induces rotor currents, and th... 1
- Explain the construction and working of a brushless DC (BLDC) motor. List its advantages and applications. Answer: A BLDC motor has permanent magnets on the rotor and a three-phase winding on the stator; Hall sensors detect the rotor position and... 1
- Draw a labelled sketch of a DC motor and state the function of each main part. Explain back EMF. A 220 V DC shunt motor has an armature resistance of 0.5 Ω and draws an armature current of 20 A; find its back EMF. Answer: back EMF E_b = V - I_a R_a = 220 - 20 × 0.5 = 210\ V. Construction PartFunction Yoke (frame)Outer cast-iron or steel frame; gives me... 1
- Draw the characteristics of a Zener diode and explain the application of a Zener diode as a voltage regulator. (asked in MU Dec 2025) Answer: in reverse bias the Zener current rises sharply at the breakdown voltage V_Z while the voltage stays almost constant; connected in r... 1
- Explain the working of an LED and list its applications. Answer: An LED is a forward-biased p-n junction in which electrons and holes recombine and release energy as light (electroluminescence). Wo... 1
- Compare BJT and FET. (asked in MU Dec 2025; also in June 2025 KT) Answer: A BJT is a bipolar, current-controlled device with low input impedance; a FET is a unipolar, voltage-controlled device with very hig... 1
- With a neat circuit diagram, explain the operation of an NPN transistor as a switch. In such a circuit \(V_{CC}=12\) V, \(R_C=1\) kΩ, \(\beta=100\) and \(V_{CE(sat)}=0.2\) V; find the collector saturation current and the minimum base current needed t… Answer: I_(C(sat)) = 11.8\ mA and I_(B(min)) = 118\ μA. Circuit An NPN transistor is connected in common-emitter mode. The load (R_C, or a l... 1
- Write the formulas for delta-to-star and star-to-delta transformation. Using them, convert a delta network with \(R_{AB}=3\ \Omega\), \(R_{BC}=6\ \Omega\) and \(R_{CA}=9\ \Omega\) into an equivalent star. Answer: R_A=1.5\ Ω,\ R_B=1\ Ω,\ R_C=3\ Ω (star arms from the centre N to A, B, C). Delta to star: each star arm = (product of the two delta... 1
- State and prove the Maximum Power Transfer theorem. Derive the formula of maximum power delivered. (asked in MU Dec 2024) Answer: Maximum power is transferred when R_L=R_th, and then P_max=dfracV_th²4R_th. Statement: In a linear, bilateral DC network, maximum po... 1
- Using Thevenin's theorem, find the current through the 6 Ω load resistor in the circuit described below. Answer: V_th = 33\ V, R_th = 5\ Ω; current through the 6 Ω load = 33/(5 + 6) = 3\ A, flowing from A down to B. Thevenin's theorem: any linea... 1
- Determine the Norton equivalent of the network at terminals A–B and hence find the current through a 10 Ω resistor connected across A–B. Answer: I_N = 3\ A, R_N = 8\ Ω; current through the 10 Ω resistor = 3 × 8/(8 + 10) = 1.33\ A (from A down to B). Norton's theorem: a linear... 1
- Using nodal analysis, find the current through the 4 Ω resistor. Answer: V₁ = 8.33\ V, V₂ = 11.67\ V; current through the 4 Ω resistor = 0.833\ A, flowing from node 2 to node 1. Method: take the bottom wir... 1
- A sinusoidal voltage of 230 V (RMS), 50 Hz is applied to a circuit. Write the equation for its instantaneous value and find the time taken, measured from the zero crossing (going positive), for the voltage to reach 200 V for the first time. Answer: v=325.27sin(314.16 t) V; the voltage first reaches 200 V at t≈2.11 ms. Step 1: Peak value and angular frequency. V_m=sqrt2 V_rms=sqr... 1
- A series circuit consists of a 20 Ω resistor, a 0.1 H inductor and a 50 μF capacitor connected across a 230 V, 50 Hz supply. Calculate (i) the impedance, (ii) the current and the expression for \(i(t)\), (iii) the power factor, (iv) active, reactive… Answer: Z=37.94\ Ω (capacitive), I=6.06 A, i=8.57sin(314.16t+58.19^°) A, pf =0.527 leading, P=734.8 W, Q=1184.8 VAR (capacitive), S=1394.1 V... 1
- Two impedances \(Z_1=(6+j8)\ \Omega\) and \(Z_2=(8-j6)\ \Omega\) are connected in parallel across a 200 V, 50 Hz single-phase supply. Find the admittance and current of each branch, the total current, the overall power factor and the total power. Answer: Y₁=0.06-j0.08 S, Y₂=0.08+j0.06 S; I₁=20∠-53.13^° A, I₂=20∠36.87^° A; I=28.28∠-8.13^° A; pf =0.99 lagging; P=5600 W. Admittances: Y₁=... 1
- State the condition for resonance in a series RLC circuit. A series circuit has \(R=10\ \Omega\), \(L=0.2\) H and \(C=50\ \mu\)F and is fed from a 100 V variable-frequency supply. Find the resonant frequency, the current at resonance, the quality fac… Answer: f_r=50.33 Hz, I₀=10 A, Q=6.32, BW =7.96 Hz, f₁=46.51 Hz, f₂=54.47 Hz. Condition for resonance: X_L=X_C, i.e. ω L=dfrac1ω C. Then the... 1
- A balanced 3-φ, star connected load consists of three coils each consisting of R = 6 Ω and XL = 8 Ω. Determine the 1) phase impedance 2) phase voltage 3) phase current 4) line current 5) power factor when connected across a 400 V, 50 Hz supply. (aske… Answer: Z_ph=10\ Ω, V_ph=230.94 V, I_ph=I_L=23.09 A, pf =0.6 lagging (total power 9.6 kW). Star connection: V_L=sqrt3V_ph, I_L=I_ph. 1) Z_ph... 1
- Solve the equation \(x^7+x^4+x^3+1=0\). Answer: x=e^(± iπ/4),\ e^(± i3π/4) (i.e. ±frac1sqrt2±i/sqrt2 ), x=-1, x=1/2±sqrt3/2i. Factorise: x⁷+x⁴+x³+1=x⁴(x³+1)+(x³+1)=(x⁴+1)(x³+1)=0.... 1
- Prove that \(\cos^4\theta\sin^3\theta=-\frac{1}{64}\left(\sin7\theta+\sin5\theta-3\sin3\theta-3\sin\theta\right)\). Answer: Proved, using x=cosθ+isinθ so that 2cosθ=x+1/x and 2isinθ=x-1/x. Let x=cosθ+isinθ. Then 1/x=cosθ-isinθ, and by De Moivre's theorem x... 1
- Using De Moivre's theorem, prove that \((1+i)^8+(1-i)^8=32\). Answer: (1+i)⁸+(1-i)⁸=16+16=32. 1+i=sqrt2(cosfracπ4+isinfracπ4) and 1-i=sqrt2(cosfracπ4-isinfracπ4). By De Moivre's theorem: (1+i)⁸=(sqrt2)⁸... 1