Engineering
- Compare single-phase and three-phase induction motors. PointSingle-phase induction motorThree-phase induction motor Supply1-phase AC3-phase AC Field producedPulsating field (two counter-rotating... 1
- Explain working of a LED. LED (Light Emitting Diode): a PN junction diode that emits light when forward biased (electroluminescence). Made of direct band-gap compound... 1
- Find the current through 8 Ω resistance using Thevenin's Theorem. [Circuit diagram: printed as an almost completely black (over-darkened) box in the source scan; element values and connections cannot be read — partly illegible in the source scan.] Note: the circuit for this question is printed as an almost completely black box in the source question paper, so its values and connections... 1
- Explain the construction and working principle of a BLDC motor. Brushless DC (BLDC) motor: a DC-supplied motor in which mechanical commutator and brushes are replaced by electronic commutation. Constructi... 1
- A voltage e(t) = 100 sin 314 t is applied to a series circuit consisting of 10 Ω resistance, 0.0318 H inductance and a capacitor of 63.6 μF. Calculate (i) impedance of a series circuit, (ii) expression for i(t), (iii) power factor (iv) active power,… Answer: (i) Z = 10 − j40.09 Ω = 41.32∠−75.99° Ω; (ii) i(t) = 2.42 sin(314t + 75.99°) A; (iii) power factor = 0.242 leading; (iv) P = 29.29 W... 1
- Draw the characteristics of Zener diode and Explain application of a Zener diode as a voltage regulator Zener diode A Zener diode is a heavily doped silicon PN junction diode made to work in the reverse breakdown region without damage. Its symb... 1
- Find Current through 4 Ω resistance using Nodal analysis Answer: Current through the 4 Ω resistor = 0.75 A, flowing from node B to node A (with the 5 A source taken as delivering current upward int... 1
- Explain CE configuration of BJT with the input and output characteristics. Common-emitter (CE) configuration: emitter is common to input and output. Input is applied between base and emitter (V_BE, I_B); output is t... 1
- Three identical coils each [4.2 + j5.6] Ω are connected in star across 415 V, three-phase, 50 Hz, AC supply. Determine (a) the line current (b) the power factor and (c) the total power. Z_ph = 4.2 + j5.6 = √(4.2² + 5.6²)∠tan⁻¹(5.6/4.2) = 7∠53.13^°\ Ω. Star: V_ph = 415/sqrt3 = 239.6 V. (a) Line current: I_L = I_ph = 239.6/7 =... 1
- Explain the construction and working principle of a single-phase transformer with a neat labelled diagram. Transformer: a static machine that transfers electrical energy from one AC circuit to another at the same frequency, usually changing the vo... 1
- Draw the construction of a DC Motor and label its parts. What are the types of DC Motor? Construction PartFunction Yoke (frame)Outer cast-iron or steel frame; gives mechanical support and protection, and carries the return path o... 1
- Find supply current, current in each branch and total power factor. Answer: I₁ = 5.90∠−75.14° A, I₂ = 4.26∠79.33° A, supply current I = 2.754∠−33.33° A, total power factor = 0.836 lagging. Given (from the fig... 1
- Determine Norton's equivalent circuit which may be used to represent the given network at the terminals AB and hence find current through 5 Ω resistance. Answer: Norton equivalent at A–B = 1.636 A (18/11 A) current source in parallel with 5.5 Ω. Current through the 5 Ω = 0.857 A (6/7 A), flowi... 1
- Define the following terms in the series RLC resonance circuit (i) Resonance Frequency, (ii) Resonance curve, (iii) Half-power frequencies or Cut-off frequencies, (iv) Bandwidth, (v) Quality factor The five terms are all read from the resonance curve of a series R-L-C circuit fed from a constant-voltage supply whose frequency is varied.... 1
- Compare BJT and FET PointBJTFET (JFET/MOSFET) CarriersBipolar: both electrons and holesUnipolar: only majority carriers ControlCurrent-controlled device (I_C =... 1
- An alternating current of frequency 50 Hz has a maximum value of 12 A. Find (i) Equation for instantaneous value of current and (ii) Time taken to reach 9.6 A for the first time. Given: f = 50 Hz, I_m = 12 A. ω = 2π f = 100π = 314.16 rad/s. (i) i = I_msinω t ⇒ i = 12sin(314.16 t) A (i.e. 12sin 100π t ). (ii) 9.6 = 12s... 1
- What is the efficiency of transformer? Efficiency of a transformer is the ratio of output power to input power: η = Output/Input = Output/(Output + Losses) = fracOutputOutput + P_... 1
- State the function of each constructional part of a DC motor. PartFunction Yoke (frame)Outer cast-iron/steel frame; gives mechanical support and protection, and carries the magnetic flux (return path) b... 1
- Write applications of LED. Applications of LED: Indicator / pilot lamps on electronic equipment, panels and chargers. Seven-segment and dot-matrix displays (calculator... 1
- Using Superposition theorem, find voltage across 4 Ω resistor. Answer: Voltage across the 4 Ω resistor = 28 V (top end positive). Superposition theorem: in a linear circuit with several sources, the resp... 1
- Explain the working principle of three phase induction motor. Working principle of a three-phase induction motor: Rotating magnetic field: the stator carries a three-phase winding displaced by 120° in s... 1
- A coil consumes 1 KW power from 50 Hz single phase ac supply and volt-ampere input is 2 KVA. If value of resistance of coil is 10 Ω then find the following parameters with respect to a coil. (i) Value of inductance, (ii) Phase angle, (iii) Power fact… Given: P = 1000 W, S = 2000 VA, R = 10 Ω, f = 50 Hz. Current: P = I²R ⇒ I = √(1000/10) = 10 A. Voltage: V = S/I = 2000/10 = 200 V. (iv) Impe... 1
- Draw and explain the V-I characteristics of a Zener diode Zener diode A Zener diode is a heavily doped silicon PN junction diode made to work in the reverse breakdown region without damage. Its symb... 1
- State and prove the Maximum power transfer theorem. Derive the formula of Maximum power delivered. Statement: A DC network (linear, bilateral) delivers maximum power to a load resistance R_L when R_L equals the Thevenin (internal) resistan... 1